Hello, this clip is back to meet me from KAP Network again as usual. And in this clip, I'm going to make a clip on how to tie. with the microtic device in order to remote from the outside Come in to manage the microtic equipment. This is usually We will have to use a method to receive the Internet in bridge mode or get a real IP. Or if you accept DSCP, you have to do a port forwarding. It will be able to use the microtic cloud. In order to be able to remote control from outside to manage the microtic device But in this clip, I'm going to use DNA. In order to remote control from outside to manage the microtic. It's in this clip. I will use it as the DNA of NoIP. Let's deal with the microtic device. Oh, let's see the picture first. The format will be something like this. We just connect to the internet from anywhere, outside and remotely via DNA. where we have digitized and created dnas and noip website then we put it in microtic and we can remote control it through dreams come into microtic its advantages yes it is It can be used with all types of internet reception. Whether it's DSCP Kaiant. Get real IP internet. Or you can do bridge mode. And one more thing is that it will be safer from being attacked. Because dns binding, naha, it can use the defense of the microtic, which the defense of the microtic, it will block it from vans legs . to protect its router In part It will make us No need to reset to factory defaults. and the safety of There will be more. And another thing is that we don't need to tell people with disabilities. Make a bridge mode for us. No need to tell him to release Nast for us. which it will be easy to set up our And you don't have to bother with the service provider, haha. And one more thing, it's free. No extra cost It will have disadvantages. Don't call it a disadvantage. Let's call it a limitation. Its limitation is that it has to be handled every thirty days. In the case that we use it for free, because one host, this one that we create once, will last for thirty days. After thirty days, we will have to create a new host and change it in order to enter it again because this is in the case of free use. But if in the event that we lose money annually And you don't have to come in to manage it often . Okay, let's go see how to set it up. how it is set This method is very easy . We have to go to the noip website first, then go to register and register successfully. It's done We go to our account and set a username. When finished, go to the host. This host is free to use. It will be able to kick it up three times, it's free, one can be used for thirty days. After thirty days, it expired. We have to build a new one. This one I will create. I will use this. Or ah, I'll use it as a lower one. It will be. I will use it as this name. Let's go to bind with Microtic. When we come, we have already registered on the noip website. Let us go to the website of microtic, it will be wiki dot microtic dot com . Or whoever can type it, it will come up for you. That is, it will be the website of the website. will tell you how to do it will tell you how to create it and it will be there Come to us all right. Here, I will use it in two parts. The first part is going to be the part, the second part will be the part, which is for updating the biotic DNAs. from after that Let us copy the script or the exact code here and put it in the notepad. and then solve Exactly the username Right on the username and password. And then it will be part of the host. Or the DNA that we're going to use here? and then the interface The interface is the van legs of the Microtic itself. Whoever accepts it, can put it in any leg, put it in it, just put it in it. It will have four points but the first was my second point is that it is three points. The fourth point is the interface here. There will be four points. that we have to fix When finished editing Let's look at point one. He said to create a new script. by naming the name as the P-DNA update unit We can go to the microtic right now. When entering the microtic is finished, we press the plus button up, go to system, system and script, then press the plus, press the plus up and name it after him. This one I will use the name noise pd dn nest update is the name that he suggested. Then copy it and put it in. Permissions, he suggested that we set permissions as right test and read and then set permissions accordingly. The other ones that we use, we can remove it. There are only three left. Naha, when you're done, press apply first. Just in case the microtic slips away, so we don't have to create a new one. It's done. Let's go copy the scrub in the first part and put it in. I'll take it from this one, starting from here. It ends here. We can copy it. and then put it in The script is fine. Haha. Let's paste it. Once done, you can click OK. Once you click OK, click on the script that we created once and then press Run Script. The script runs right away, so we're going to test that it can enter through the DNA that we have. Can it be tied to a microtic? Haha . I haven't changed it recently. Ah, use it as this. Now, it's going to be this one. The one above, I'll take the one above. Let's go try it. Oh , now everyone will see that the DNA that I have attached to the microtic. can be used You can access via web fix. Now, let's try to enter through the Winbox and then open the Winbox again. And then put it down Done and connect. Everyone will see that it can. both web fixes and Winbox. Now, the script will have one more part which is in the section. BNS update. It's down there in this section. It will keep it updated. The IP time of Microtic has changed. it will go to update From the NoIP website. Update, ah, in the NoIP website. Let its IP match microtic It will be able to use it normally. If we don't set the update script here, the time IP in the microtic changes, and the IP in the NoIP website doesn't change accordingly. Here, it will work. No, it won't be able to remotely enter through the DNA. therefore script in this section We can copy it. and then you can put it in the new terminal Then put it in the new terminal. Ah, it's done. Let's go look in the system. Go to the system. And sketch Deller. It will come up with this page. Oh. K. Well, it's done. We, ah, at this point, we've done it. Bind the DNA Go with microtic and set the update of the script. Let it be updated all the time. Let the IP match with the web noip . Between the microtic and the noip site, let it change. Follow me all the time it will be able to You can use it all the time. How to bind noip dns with microtic devices. There will be a method. Do it easily like this. It's very easy because in the microtic web part , they have already created a complete script for us. The way to do this is very easy. This is for people who do n't know or still don't understand this part. I picked it up to make a simple clip easily. Basic basics for you to see. Well, before we leave each other in this clip, please press follow. Press like the YouTube channel of Cape Chanel. And another channel is Facebook fan page Cave Network Please press follow and press like. because on the page of Cape Network On Facebook, we will have a promotion for everyone. I'm always here It's for tracking promotions or what products are cheap and cheap. Or follow the work of us Cave Network. I also leave it. For today, I have to say goodbye. And meet me in the new clip, the next clip. Hello.
