In this clip, we will renovate the floor of the garage. This garage flooe has been used for about 15 years. Some area has been old, rough. And then there are some cracks. We will make it To be a polished concrete area like this Better than that That is, we can do it ourselves. How will we do it? Let's go! Hi Guys Welcome to Daddy's Tips channel. First thing first, let's mend the cracks first. The cracks that we have to focus are This long crack A small hole like this. We can leave it. Because the crack is too small We have to open it to have an area. To allow the mortar to be able to adhere Therefore, if there is no grinding machine We will use a hammer like this. Hammered into the middle of the crack. And then it will be a V-shaped down. Like this Or if you have a 4 inch angle grinder like this Will make the job easier We will use a tile cutter blade. 4 inches If we use an angle grinder At least you should use a dust mask. And goggle to protect yourself Ear plugs Gloves may not need to be worn. Because maybe It may be entangled with the cutting blade. Grinding left and right. Give it a V-shape track Along the crack line Otherwise, the mortar that we will use to cover the cracks. Will not be able to seep into the groove Where it has bulging a lot We have to rub it out first. Keep the surface as smooth as possible first In this case, we will use it as a concrete polishing blade. Like this We will use a blade like this. To smooth the surface And one more thing If the surface is already polished cement That we want to fix We will scrub the floor to make it rough. To increase the adhesion area For the skim coat mortar that we are going to go down here After scrubbing the floor It will be like this. We are going to fill the cracks. The first step we have to clean it up Sweep away the dust For this step We will use the cement to fill the crack first. THis SINGHA JOINTING MORTAR 2 kg bucket, price 644 baht This one is the mixing liquid. This bag is mortar. Let us pour the mixing liquid down first Pour it all. Then mix the motar into it. *** Cannot mix by portions *** Therefore mixed at once And use them all within 35 minutes After mixing The motar will be creamy like this. leave it for 3-5 minutes. Before use Here we add mortar to the groove. With one swipe right Swipe right and swipe left. Let it fill into the groove And then Swipe and swipe in the middle one by one. For cement mortar If the joint is as wide as in this video clip It can be used for about 4 meters of joint. For a 2 kg bucket After we have finished We have to wait 1 day. Until it is really dry. See you tomorrow Today we will start work a little early. We'll take a piece of wood. That we can handle it easily Then take sandpaper number 180 Wrapped In order to sand the floor If we use our fingers to sand. The pressure is not even. Make your fingers May be able to scrub into the groove. Polish it to be smooth surface. Will be easy to apply skim coat After we have sand it. The next step is We have to clean the floor. Keep it dust free And various stains free After the floor has dried We will continue to use masking tape to define the area Next step We will use a concrete binder solution. Of the brand "SINGHA SUPER BOND" Same brands as before I have put it in same order. This bottle is 5 liters. Price 889 baht including shipping Before we apply the solution. Let us finish mixing our main product first. This brand "SINGHA SKIM COAT FLOOR HARD PATCH SK03" 20 kg, price 1,147 baht including shipping It cans cover an area up to 25 square meters. For the first round of coating We will mix the skimcoat mortar. In the ratio of 2.5 parts mortar to 1 part of water By pouring water first And then we gradually maix it The cement will be like this. After mixing We'll leave it for 5 minutes. While waiting for us to apply a cementitious solution. Turn it back and forth to mix it first. And pour it down Apply with a normal paint roller . To increase the adhesion Between the original concrete cement floor and the skimcoat cement floor that we will cover on the surface To increase adhesion And reduce the chance of cracking After applied, wait a moment. Let it sticky. Do not let the solution dry. Because it is like it has never been applied After that, Apply the skimcoat into it. And then use a trowel at 30 degrees to the ground And apply it in the same direction To sum up, Fill the area first. Dividing a small area, do it continuously. Apply solution on a small area first. And when we apply skimcoat on the area that almost finished. We will gradually go to apply the solution in the next point. The solution will not be too dry. Normally skimcoat mortar It is mainly used on the wall. Because with the thinness of the mortar That does not exceed 1-3 mm Making it could not withstand weight But Singha Mortar Floor Hard Patch SK03 Is the only one in the market That can do skimcoat "on the floor" Able to withstand weight Or that it can be used a garage floor like this. So this ability is what I choose That will be used to improve the floor of the garage Because if compared with the old flooring method This one is much easier. More importantly, you can do it yourself. Then wait about 1 hour. Until the cement turns its color from a dark color like this Until it dries in a gray and white color like this Use a picce of wood to wrap sandpaper number 180. Used to smooth the floor. Will notice that the floor will have a pattern from the skimcoat It is a loft-like pattern. When we finished We will get a flat floor. But there are still pattern on it. Some surfaces when we first apply it. We might see bubbles like this. If we saw when we were appling skimcoat We sould clear them at that time But if you see when it is dry use sand paper to remove it Yesterday, we have finished the first skimcoat layer and We have already sanded the floor. The floor will be like this. White like this And there are pattern. From now on, it will be the second round of skimcoat. Let's clean the floor first. If you can find a small trowel like this. Will make it easier to work Round 2, we will mix the skimcoat motar SK03. 2 parts mortar to 1 part water In order to cover the surface But still wanted to see the pattern underneath Therefore, we will apply as the first layer To fill the area But let us press the trowel too If we can apply the second layer on the same day as the first layer Will be the best But if the day ends And have to come and do it for another day like me We should do it late. Almost noon Let the floor really dry Then we will do it again. Now, I have finished the second round. The next step, we have to wait 1 day. Then we will apply the coating solution. First of all, use a mop. Soak it in clean water and wipe around first. To remove dust That remaining on the surface Clean the floor and let it dry. The last step is coating The coating solution is SINGHA FLOOR HARD COATING SS-400. This one is a 3 liters. Price 846 baht including shipping Use the same tray and the same roller as before. How to apply the solution is up to you. My method is apply coating on the long side and continue I think I do it like this. Will save more more solution After finishing the first round of coating Wait about 1 hour Or wait until it's all dry And then come to apply 2nd rounds After an hour, it will be like this. More shiny surface But it's not slippery. Let's go for 2nd round. Apply the coating. Will help the surface of the cement harder Scratch protection More shiny surface And see the pattern more clearly Waterproof and moss and fungus resistant Mold resistant It's a water based solution Therefore it not have stong smell Making it possible to use it internally as well This bottle is 3 liters. I can use it for 2 coats.on my 20 Sq.m. area and still have a lot left Due to the leftover coating solution in the bottle So I apply the third round. and it empty Let's wait and see. on tomorrow What will the surface be like? After leaving it for 24 hours We are going to remove the masking tape together. Notice that it will be removed easily. If it haed, we can use a screwdriver. And then we can pull it out. Let's have a look after we are done. and they said it was waterproof. I'll pour water Try walking to see if it is slippery or not. After trying to walk The floor is not slippery. After the coating is finished We can clean the floor Can wipe and rub normally. The cost of materials included will not exceed 3,900 baht. Even if we are able to do it ourselves I thought that it would be able to save about 3,000 baht for a Tilers Because it takes many days to complete After we have applied the coating We have to wait at least 24 hours. until you can walk on the surface But if you Want to open an area to use as a garage Or is it a way for the car to run through It should wait at least 48 hours. So that the surface is strong enough I hope you find this video clip useful. For friends Who are looking for a way to improve the floor That can be done by yourself That's it for today See you next video clip. Good bye!
