This bathroom has been used for about 9 years and now there are stubborn dirt stains on the tile surface. and from using bathroom cleaner It causes the color of the tiles to become discolored in some spots. It makes things unattractive, which I thought before. There is no other solution. Other than removing the tiles and replacing them with new ones. But the work will Very big I have found a new way. We can improve the color of bathroom tiles, both the floor and walls, to make them beautiful like this. And better yet, we don't have to remove new tiles. And you can do it yourself too. Let's see how to do it. Hello, welcome to the Daddy's Tips channel. The first step is that we have to cleanthe bathroom., maybe with a brush and detergent Then rinse completely with water and leave it to dry. The surface that we will work on must not have any dust, grease, moisture, and dirt remaining. After that, we took protective tape to cover the surface where we didn't want the paint to stain. Previously, when I heard that there was paint for tile floors, I went looking for it and found the only one in the market that said it. It is a color applied directly to the floor and wall tiles. without having to apply foundation And there's also TIS standard, weather resistant emulsion paint. It's called CC Shield from World Paint. I will use cream paint to paint the walls of my bathroom, size 11.2 square meters, and I will try using a 0.85 liter can first. I bought it online for 890 baht. I saw that 1 can can be applied. 15-21 sq m per 1 round in case it can all be used. Just enough cans will cost less than 100 baht per square meter. For use, he will have a water sachet. The hardening accelerator comes with a label labeled "Ingredient B". which I have to mix into 1 packet per 1 can. If it happens that according to the area, I think if we can't apply it all, we have to divide and mix. We have to stir the paint so that the hardener and the paint are mixed together. It's very good. If we have a stick to stir the paint by Only with a drill it will make it easier. Then we calculate the amount of paint for one coat, pour it into the paint pan first, and then cover the remaining paint with the lid of the can to prevent the paint from drying out. The application process may use a brush or roller. Anyone who has a paint sprayer can use it. When I use A short-haired roller will roll the smoothest. Before we apply, we have to use a paint roller and the tray to allow the paint to absorb into the roller first. Then gently roll it on the surface. where we will continue to roll up and down diagonally When you see the paint missing, roll it back and collect the colored seams. Then do the same by continuing from the previous point. Keep going. At the point where the edge is at an angle We used a small paint brush to color the edges. If possible, make the color as smooth as possible. Or do we keep the edges and then use the roller again? And then the part that is the grout groove If we roll past it and the paint doesn't go down in the Grout the grout and then use a paint brush. To keep in the groove Then use a roller and roll over again. Doing this will give you a smooth and even color. During application, I noticed that the texture of the paint was dense and slippery. It can be applied easily and sticks well when applied. The paint won't have much of a smell. However, the bathroom is a confined space. We should have ventilation and come out to rest while applying. After covering the entire area in the first round, it was considered fairly good. And if there's still paint left in the tray, take it. Wrap it in a plastic bag so that no air can get in so it won't dry out. After applying, they will ask us to wait approximately 30 minutes to 2 hours. Before we apply the second round, it will be much easier to apply the second round, soaking in the color at once. Then you can roll it over a larger area. The application steps are exactly the same as the first round. I noticed that his color was able to conceal well. I thought that if Floor tiles or wall tiles in someone's house that have an old, outdated pattern. When you see them, you don't like them. We can use it to change the pattern. When I went to buy it, they had so many colors, up to 12 shades like this. I also went to take a sample photo for you to see. After applying the second round, you will see that it is much smoother. I will wait 2 hours and then apply the 3rd coat. But before applying the 3rd coat I would like to suggest that you try rubbing the surface of the paint with a cloth first. If there are any areas that we cleaned before applying, they are not good. We may see the color come out. It's a small point. It's possible that it's at that point. Before we painted it, there were dirt stains that were embedded in it, and when we painted it, the paint wouldn't stick to the surface. Let us take the scorer at that point. To collect the color first and then apply the 3rd round. From what I've read it says that you should apply 3 coats so that the color isn't too thin. And after I finished applying the 3rd coat, the paint was almost empty in the can, showing that it could be applied. It's very economical because a wall of 11.2 sq m. 3 times will give you 33.6 sq m. Which after applying it is possible because applying the 2nd and 3rd rounds will save the paint. Than the first round which if it were the floor A bigger place You can use a 3 liter can to cover 66-80 sq m., which I bought. Via online channel 2366 baht In case you put it on the front of the room. The price per square meter will be cheap. A little more than a small can. After finishing the third coat, we have to wait at least 24 hours before actually using it. But in the meantime, I'm going to paint the floor with another color first so I don't waste time. As for painting the floor tiles, due to the small area, about 2 square meters, a little bit. If we don't apply the entire can at once, we have to divide and mix. We will be able to save the remaining paint to use next time. Which the floor paint will Divide the paint from the can in half. Then mix in half the packet of hardener, stir well, then apply it on the surface. It's the same way as painting the wall, which involves applying 3 coats as well. It is recommended that before we apply the floor we should wipe it clean. The floor again And if possible, take Vacuum cleaner comes to suck because there will be on the floor. It's easy for scraps of dirt to fall on the floor. I noticed that the brown color was painted on the floor. It was almost completely closed from the first round. Okay, we've already applied the first coat. Now we'll apply the second coat. So I changed the application method a bit by using a brush to paint the edges by applying it onto the grout lines. Before I use the paint roller to apply another coat, when we trim the edges, we may I missed a lot of other colors. This is not a problem for us. Take a tissue soaked in a little water and wipe off the stained paint. After we finish applying the 3rd round, we wait 24 hours before we can use it. Today is day 2, after 24 hours have passed, let's see how it goes. The floor paint and wall tiles that were applied were considered smooth. I feel like his skin is very tile-like. Because it has both oil and shine. The surface of the color film like this is very different. We cannot find it by using ordinary house paint. When we remove the tape, we should use a cutter to cut it. When we pull the tape, it won't pull. Color film also came out. And I have actually tried taking a shower in this room. The surface. The tiles that I applied to the floor were not slippery when touched by water. which if it is normal use I don't think there should be any problem. At first I was worried about its strength and that it would be usable. Is it durable? which I received information that within 1 For a week after applying, avoid scratching the surface. For example, using a scrub brush and using bathroom cleaner. And after 1 week We can use bathroom cleaner as usual but it doesn't work. It should be scrubbed violently. After I finished applying it and used it, I was able to use the bathroom. You can do it normally. In addition to painting the floor and walls of the bathroom tiles, as far as I inquired, the seller said that We can use it to paint floor and wall tiles. The kitchen as well, which he sent results Tested to be able to withstand oils from cooking and dishwashing liquid as well. which tiles the floor and walls of the room Other things, we can apply as usual. Just have One thing to note is that if we paint it on the floor, of the room where we have to place a chair or a table If it happens that it is used like that after We have finished painting. We had to apply two more coats of World Paint's CC Shield PU Clear to coat the surface. and make the surface stronger. If it happens that any of your friends' houses are The tiles look old, so try this method. Please use it and see. This method will help. Our tiles look new without having to come. Removing tiles is a big job. And what's better is that we can do it ourselves. As for the cost per area that I do, I will put it in this table. As for information links for all products, I I'll put it in the description under the clip. Put it in the comments as well so friends can take a look. And if you like the technique Like this, don't forget to press like and share. Press Subscribe to the Daddy's Tips channel as well. Let's go today first. I'll see you in the next clip. hello