WZRELB 5000W/10000W Peak Pure Sine Inverter Demo

today we're taking a look at the wzr ELB 5000 watt continuous 10,000 watt peak pure Sun inverter I've installed a 3000 6000 watt in my RV really pleased about that the manufacturers provided me this larger unit to solve another problem I have which is powering a it's remote amount property where it is not feasible to run power to it I've been using a rather small four hundred eight hundred watt unit from a well show you I'll show you where I got it recognized that it was proving insufficient to power anything more than the lights in the building have all LEDs and with a modified sine unit I was getting a lot of blinking and what-have-you on the pre wire on the shed we have an input for a generator which I will run or have run to run big loads before then we have the input for the new inverter lights outlets in the building and Hensel is actually a second building I've got another line run - no just lights in it all that's being powered by this one inverter so this unit is powered up its wired I've got showing 120 volts both point one end and a little monitor to help monitor the battery when the inverter is not on a group 27 or group 29 12-volt battery powering this system so we're just going to start running a few things so leave my TV on while I'm playing in here so here's a drill which is a three point to implode wire sniffer which is a 5 amp load step up to a router which is a 11 amp load [Music] circular saw which is 12 amps problem is having us I like to run down occasionally with the old inverter I could at least turn on some lights but I really couldn't do anything else without rolling out a generator even if I needed to cut a piece of wood or something so now let's try an even bigger load this is a 15 amp induction start chop saw let's see what happens here's a really big load this is a 15 amp table saw let's turn on let's see what it does [Applause] yeah it's gonna be no problem at all I'm sure my neighbors and appreciate me not firing up the generator and let it warm up at some odd hour of the night I just need to run down and cut something the nice thing when I get done and turn on the shot back and clean up my old inverter would just scream if I ever tried to do that so that's what this is gonna work really well for my application

Channel: Allen Patterson

Views: 15,919

Rating: 4.810811 out of 5

Keywords:

Id: gV3Cp2OPSPA

Length: 3min 35sec (215 seconds)

Published: Mon Jan 06 2020