Why Not Do It All!?

[Music] [Music] n [Music] okay there goes Tony I love that sound first thing in the morning so we got this ready yesterday front sidewalk so we're going to do it the same way we'll bring I need to make a little ramp there we'll bring the uh concrete right up the sidewalk and pull our way out so I'll get a couple boards for a ramp hey can you bring some boards on with you we'll make little ramp with it bring some boards with you and we'll make a ramp there I have one 2x8 maybe just a couple blocks here they are fitting the step liner in 4T and then we'll do a little chunk for return we put a conduit in down there to get low voltage wire across Steve's working on our rebar that's on that and I'm not doing anything I'm talking your head up me want this on yet all right here comes concrete I still got to find a couple of tools I just want to get this first Barrel coming [Applause] up on the rebar we'll readjust as we're going [Music] okay okay make his way right back on sorry too bad I didn't have the camera on in time you want to redo yeah redo that Steve Jo threw a joint clip and hit a branch SM mat right in the head out it was upper shoulder yeah okay we are working on the steps you look pretty good there you go good Tim you're hitting a Landing yeah yeah there we go good [Music] [Music] okay this is why I like to use epam in these situations see how that just molds right around this little step [Music] out if we use our regular expansion joint now that leaves a huge gap there and it kind of could lock in around that just wanted to point that out one last time okay we are fast forwarding to pulling the steps all right we got all this cleaned up we're almost ready to roll it's still a little bit soft focusing on the steps I wanted to get a cut at the base of the step in the beginning of this one and a cut at the bottom of the step [Music] cleaning up that bottom here's our broken Stone Face we uses quite often the customers really seem to be liking it little bit tight nothing for me to do in there except Edge this top little Landing that time of year [Applause] they're everywhere what's the deal with Lantern flies this year are they coming back um about to get bombarded with cicas kind that float right beside you mat a float so you had two oh that's no this is fine and here we go again we just Le Leaf blew this off so we got a couple of pedals here but it was covered 30 seconds ago I'll just spray up to this wall we'll get this rolled we might have to Leaf blow it looks pretty good we'll see what happens I get a big wheel going right behind these guys okay okay good shape yes you think it's too wet no I said it's roll oh okay good oh yeah okay and up here now now we're in the shade getting nice texture uh we'll just slow the wheels down it's a little bit soft just like when you're floating slow and flat roll it slow I have to come up with a good saying for that one put it on a [Music] t-shirt okay I'm just starting to see a couple repeat lines from the roller [Music] okay this was Matt's idea putting the heavy Stone on this why am I doing it do not look nice different texture roll slate nice job Steve good idea good idea Matt wish I could have got a little bit more of that pretend like you're doing that stuff let see I do got to do right there I just need cameraman out of my way did you get enough sleep last night I did I got a full 45 minutes do you are you waiting on your coffee yeah I [Music] am then these pull out all right finish up Steve and then over here these Corners pull out then they can landscape right here [Music] I'll show you a picture from back a little ways got some gravel sticking out here just clean that up chop chop chop [Music] okay clean that edge up now the camera is about 8 Ines away from the concrete here's what it looks like 3 ft away 4T away all right last one coming off here yep Ready 1 two 3 and the liners almost fall right off those ones up there what's that did you brush yeah I got them yeah never away like that it's always back making this [Music] match it you can use your fingers and when they get sore you can use a pin you can use a claw hammer it's pretty soft though you probably don't even have to do that we just like to [Music] [Music] is [Music] [Music] now Landscaping come right through here okay there's our steps and walk go to the pool all right on the clean up grab a sip of coffee see you in a minute all right all right so there's the steps sidewalk to the pole area my dad and I just put the control Cuts in on the pool we need to give this a day before we power wash it scrub it and color it after that we give it another day then let it get let it dry to get sealed and uh forgot about the uh front sidewalk there but yeah everything turned out nice everything went smooth we'll see you guys on the next job okay here we are at our next project we had Tom mats truck here got the traction mats in place that way we don't harm the yard we won't harm the yard very much how how about if I say it that way so Tom's going to bring the dump truck in right behind me bring it all the way back [Music] here we're ripping out the patio The Brick little bit of grass and putting them in a new crinkle finish patio [Music] I'll try and do all my turning up here where we're doing [Music] concrete and I'll load Tom right [Music] here okay for a little bit more digging today fire up the 301 just make sure I'm not going too big right off the house right in line here um so right about here is my corner this way all right I think I'm in line M keep an eye on me so I don't over dig it I'll just give you some fluff up here one foot past is did the de say 2 feet yeah okay two feet then okay that's a wrap here for today you know it one more project come on along with us busy neighborhood [Music] [Music]

Channel: Concrete with the Hauses

Views: 14,842

Keywords: concrete, construction, driveway, cement, tshconcrete, TSH, work, finishing, decorative, rolled slate, sealing, excavating, prep work, border, patio, pool, garage floor, concrete pour, pouring, CAT, tear out, wood plank, gravel, xylene, color, demo, stamping, business, small business, DIY, How to

Id: fQPErQxAKfU

Length: 18min 14sec (1094 seconds)

Published: Wed May 01 2024