MENCARI KESALAHAN KONFIGURASI DASAR - MIKROTIK TUTORIAL [ENG SUB]

Hi guys See you again at the Mikrotik tutorial because this time it's a special tutorial because now I have a victim *Oh no I have a friend who accompanied for this tutorial this time is a really special episode because it will discuss many questions Mr. Pujo, maybe the one who accepts everyday questions on the Layanan menu or Support What is the most basic question, bro? how to check my connection when my connection is slow or maybe even Disconnect in which part we Disconnect? this is a basic question but maybe many people find it difficult to find the problem or maybe for those who first set the Mikrotik only with copy paste script methode and doesn't work so for the simplest settings which requires connection distribution only but still it doesn't work right that might be one our moral burden to answer because it's hard to answer because we don't know what network conditions they are in that's right sir because of that in this video we will make it a few easy steps how to find and correct errors Don't forget to subscribe then click the bell so that you get notifications we go on again how to check for network errors when we just make a configuration for a new network or when we are connected suddenly disconnected then what happened? why can it suddenly be cut off? what should be checked? basic questions from the client especially if we are network managers our client suddenly complains why is my laptop not connected? What is not connected? we don't know either but it should be connected okay we have a few steps that must be understood is connection from a laptop or from our gadget past the Router then to the ISP to upstream there is a provider or ISP or use a Modem the shape can vary there is a Modem ADSL modem Fiber modem there is Wireless or it could be LTE maybe the use is the same we have to know The internet cannot exist immediately just plugging in an Ethernet cable directly on that path can't can't be like that especially in certain places which has no network infrastructure but want to surf because there are questions like that too I was in an area with no ISP no cable connection nothing but want to surf Internet can be obtained from the Provider we cannot make the Internet ourselves first step is maybe before the first step What tools might be needed? are there additional applications possible? what application install? because we use Mikrotik we use Winbox Oh, use Winbox or if you want to use a Web browser you can too or use SSH if for a normal laptop? using Ping in my opinion is enough already using Ping can This Ping Tool is almost there in all Operating Systems so at Terminal so this is from one of the simple tools but from this simple Ping we can later know where's the fault like the doctor can know the disease like a Stethoscope can find out which part is wrong if we only use Ping the term is empty handed right no need to use any tools only use Ping but we can find out where there are problems correctly okay we will start from the first step this first step will check from the router first? or from the client side? if we are usually from clients first from the client side first from laptop to router because if the client cannot communicate with the router we cannot set up the router okay we mean will check first from the laptop first we check from the laptop first so the laptop must be connected to the router okay means before we check the connection maybe we first describe the topology okay we make a network topology that we use now so there is a client computer then on it there is a router or gateway router because it is usually called a gateway router this connection can be via cable or wireless can both of them be the same then above it goes to the provider this is an example of a network topology The simplest so later you don't have to think about it is This gateway router is different maybe there are those who use RB750 RB40111 the way to check remains the same while using the same brand but it shouldn't be the steps are almost the same in all vendors the steps are almost the same when viewed from the topology image position of my laptop the easiest way is I will try to ping first to the router okay this is used to check whether on the physical connection we use there is a problem or not first step if we can't connected to the internet check from the laptop towards the router first don't just complain if you can't connect it's hard so to check it must be in accordance with the steps if one step up there is no problem then we check it again etc this time I will try to do Ping to the IP router according to topology my router has IP 192.168.30.1 when i enter here is a timeout even though this is still in the same network we haven't set the router yet that's right sir so when from a laptop can not ping to the router the possibility is incorrect IP address settings or maybe there are physical problems even though in society we should not talk about physical things should ha ha ha ha so if the cable has a problem during the crimping process if the wireless connection can be wireless link has not been formed or such as the switch used may die it can too or the cable used is too long which caused too much power lost for new learning networks ordinary problems occur at the time crimping is not correct crimping process is less tight when pressed but for the experiment now I use industrial grade cable so there should be no problem in terms of cables to purge the problem Possible problems lie in IP settings from the client device side and on the router for the cable check process most easily we can see the indicator lights if it's blink-blink if when installed immediately live it should be right from the side of the cable Okay now I try to check IP on the client device and on my laptop I got IP 192.16.30.2 and on the Router using IP 192.168.30.1 so from here the problem has been seen already found out what is this error? the error is in my inaccuracy means the problem lies in the IP address? only the IP settings are wrong Ok now I installed the IP address correctly and Router maybe for you windows users the Router parameter is MacOS for Windows is Gateway for configuration in Windows we set the IP Address Subnet Mask then Gateway if on MacOS it's called Router now we apply So what do we need to pay attention to in the settings of these three parameters? do not need DNS configuration and others? just need to set things up first and now we try to do Ping now the connection has been missed, I can reply the first stage like this to check the connection from the client laptop towards the Router no problem can be connected Okay, now maybe go on tek connection from the router to the provider ok so we do per segment first from the client laptop to the router then from the router to the provider right now we look at the provider side from this router if we want to do a check not from the client side first but it must be from the router first and in this experiment I used This laptop is for configuring the Router here we will see in the same way using Ping the same way as before the client test to the router we check the IP-Address menu it looks like the IP address is correct use 10.10.10.102/24 then we go to the terminal menu Please do Ping to Gateway we do ping to the provider one way if we do not know what the IP Gateway is we can see on the IP-Route menu on the Route IP menu there appears to be no Gateway but we will try to Ping to Gateway according to the topology that has been described we try to ping 10.10.10.1 visible timeout ok so the IP Address configuration is correct but why is it still timeout? the first step we try to check maybe on a wired infrastructure connection at layer 1 or physical IP Address settings are correct but still can't connect means possible problems at layer 1 or physical right there may be a problem at layer 1 or physically after we browse see the installation documentation see the topology again cable that goes upstream it should be located on Ether1 on the Router and here instead connected to Ether3 who installed it like this? maybe someone accidentally moved the cable so after we move Ping is already running ok IP Address is correct layer 1 is running so the connection from Router to Provider is OK yes now we look back at the IP configuration right the next one is we will do a test Router to the Internet whether it can be connected or not we will try Ping to Domain? Ping to IP 8.8.8.8 first seen the status of No Route to Host if the conclusion of the statement is No Route to Host then that means this Router doesn't know the path to go to the internet where to go we must determine the path first on the IP-Route menu what we have seen before and there is no configuration because we haven't made a configuration for the default gateway there yes This Gateway parameter is the IP used to point to the Provider device can be in the form of a modem or LTE device or wireless router must be filled with IP that goes to the provider device that is one segment with our Router we have set the gateway we have made Should we look at the Terminal already connected the status has changed to reply means that the router can connect to the internet? True, the router can connect to the Internet so on the Internet there are IPs and also domains for an IP connection you can now we try we will try to connect to the internet domain yes we will try to ping Google.com really long out the point is we don't get the address from the DNS Server mean? we do check DNS Server that is on the IP-DNS menu and it looks like the configuration is still empty something like this that is often forgotten right we have configured IP Address and others but the DNS configuration is forgotten we just use general DNS settings which is usually used by everyone then to allow the remote request do not forget allow remote requests to turn on so that our client can use this DNS so on the client side for the DNS settings to point to this router? Yes, exactly so that it can be controlled and filtered by the router too that's right sir DNS settings complete we will try again to Ping to google.com steady wah mean now the router can connect to the Internet means that my laptop should also be able to go to the internet? ciba can or not I tried the same method earlier Ping to 8.8.8.8 can reply which mean my laptop can connect to the internet laptop to router can be connected router to the internet can be connected if from a laptop to the internet it can't? the first problem is may be in the Gateway settings but that was correct I check it's correct sir the second is NAT Oh yes NAT that is on the Router found in the IP-Firewall NAT tab this hasn't been made yet we will make arrangements for NAT our action parameters select masquerade then we also have to choose the interface for Out Interface we choose what we use is bridge-WAN our action parameter uses masquerade why should I use NAT sir? so like this most of the networks we manage for our local network use local IP although possible some use Public IP but mostly maybe 99.9% use local IP so as long as the IP on my laptop still uses IP 192.168.xx 10.xxx 172.16.xx on our router must be set NAT? right must use NAT so we make it The simplest NAT is we specify the Out Interface Interface that leads to Internet sources then the Action parameter we select masquerade ok just like that? just like that we try it first can be connected means it's connected to the Internet now we try to ping to the domain IP can be connected to the internet now we try Domain we try doing Ping to mikrotik.co.id we enter How come you can't? seen the statement cannot resolve means the possibility is settings on my laptop DNS settings seem to be correct earlier there is already allow remote request means the settings on my laptop are not right This is it The DNS server is still not filled well here it is means I have to point to Router IP address now it's OK we apply Wow, amazing means can be connected now if you can connect like now can be tested using a Web browser or use another application such as e-mail and others should be able to connect so if the connection is lost as before only use Ping can you please sir? right we analyze using Ping fix it using Winbox Okay because our router uses Mikrotik sip thank you make sure the IP is connected connection between laptop to router router to the internet laptop to the internet then if the check is already done we check for domain connections from the router to the internet or from a laptop directly to the internet so we can be sure the problem lies where so as not to guess because there are services that don't work for example from these 5 steps still can not depending on which step first so much huh? so it will really widen the problem but for the most part with these 5 steps we can overcome the problem if we use an existing router existing configuration like a Firewall rule all must be turned off all turned off first so we can make the rule as needed first yes but even though our router is later using Public IP don't forget to protect again Okay don't forget to give protection again we already have a video tutorial to secure the Router there is a separate video that discusses how to secure the router so we can stay safe and can be connected so the steps are like that first make sure the IP is connected then for the domain also connected sip like that maybe the steps to check for basic configuration errors maybe you have a more interesting story because experience in the field may be more varied may provide in the comments column below we will read and try to comment too if there is something interesting then can help share this video so that more people will see this video maybe there are more who have more miraculous problems that we might be able to make videos yes we replicate the case if there are interesting stories we can display then don't forget to subscribe and also click the bell in order to get notifications see you at Mikrotik Tutorial next

Channel: Mikrotik Indonesia (Citraweb)

Views: 83,090

Keywords: Cara Setting Mikrotik, Disconnect Router from Internet, router troubleshooting steps, Step by step troubleshooting Router, Mikrotik Setup, Setting Mikrotik dasar, Pengguna awal Mikrotik, Konfigurasi dasar Mikrotik, Setting IP Mikrotik, Setting NAT Mikrotik, Setting DNS Mikrotik, DNS Mikrotik, cara Koneksi Mikrotik ke Internet, Mikrotik, Mikrotik Tutorial, Mikrotik Indonesia, Citraweb Solusi Teknologi, Citraweb, CST, Mikrotik Hotspot, Belajar Mikrotik, Konfigurasi Mikrotik

Id: j-LIXc5Gfrk

Length: 18min 54sec (1134 seconds)

Published: Sun May 19 2019