Tradie Tips on Gapping and filling your walls | Naomi Findlay | Renovie

[Music] till he - this mother name - Louie you say there are many villages what digs like I've never seen this villa yeah it's the best stuff I think so good stuff yeah no it's pretty but I can't sleep in it yeah you like the premix of three weeks of stuff you're going to do the old-fashioned like egg nest it we didn't do that but it says a lot more time under this one if you wear a dell wire would you make sure or would you get injured by one producer okay so what's the difference here who says gloss finished I don't never seen that before the gloves the gloss finish is it's an interior exterior use okay now I think manuals sort of you know developed for is to patch just before you finish your last couple of coats okay it's like more of a finishing thing but we like to use it as a base because it doesn't shrink this is so important I like the other week and that shrinkages and you can be putting and that's why some people think they're just really bad at patching yeah and they're not not it's because they patched it well but they've used a shrinking products wrong and then they go to sand and paint and as soon as they claim that they see that it's depressed yes that's why overfilling when you patch is pretty important not other feelings so much that it's so hard to see but overfilling that if there is any shrinkage and you know temperature changes or anything happens that you can't let me you have to do this stuff helps you along with that let's get to it so Patti time okay fellas I'm patty time on all these tiny little poems that when we shot on we did blue babies back up but also when we shot them on and we've done so I have been coming for a very long time but I'm absolutely not an expert so dad I have your top tips like they don't anyone would do that my grandma all my granddad yo dude if they have to fill all these holes alright now the first tip is you don't overfill it too much that it's hard to sing because it was part of family Cindy right so I've got a nice surface here nice flat smooth surface so it should be pretty easy to get a good a good fill in there some what we'll do is we'll just apply a little bit to our tool gear yeah here's out of the other term we just want to put a little bit on the end see use two tools you have two tools details yeah we do like that what we want to do is work it in smear it off either side so it's nice and flat and then keep just a little bit of excess so that it's easy the seemed okay up do it again this one here is a little bit different because it's hair rounded so you just want to smooth that in there as best you can save that leaving a little bit of excess a little bit too much there but that stands out pretty well be proud of them all a little bit proud okay but was even true no that's not going to show Kay and said then we just cuts it on all the marina we feel comfortable with that sometimes it works better just to put on your finger and just smear it in and smear it out so that's not like cheating it's not cheating it depends on what you're comfortable with so okay you know some people might not be comfortable using the tool some people might be you know maybe the surface is a little bit rounder than it fits then it fits the tool so you can just smear it in and wipe it off how about I do all the ones on the flat yeah didn't even know is a birthday until Facebook taught me my plumbing apprenticeship we should be done so it's done how am I going to do that be nice normally use like a builder's ball yes order to fill that out mostly so to 95 percent yeah 98 percent smear it straight off sand it back and then we go over with this but this product goes so hard that's right so that's okay but do I just pour it even I know I just City user is a good fill the hollows as best you can oh that's like one of those satisfying videos a day and then wait does it dry till it goes rock garden say six or seven hours and then we're good to go I'm gonna give that another three a shot I just need more whipped alone so don't walk your excess back into the tube this is just brush not like this it's been over ten units being like save save save save save save me please YouTube's gonna cost you a lot man that's the top tip actually don't wipe your putty back into YouTube if it's started to go off one more ticks all right first of all when we aren't yapping yeah it's always good to have everything sealed because if we have new Jethro music rose walls new pasta I'm sorry a new plaster yeah what we've got is when we cap it we use a wet rag to wipe it down you can damage the surface of gyproc like a fairy oh yeah so basically don't there gap before you sealed and code crimes yeah I wouldn't recommend someone at home try that like I can do something else but I guess you gotta have basically the same services either side definitely that's what I kind of sense all right next we want to have a if we can we'll have a lake lick this gum and later the sky so there's a lot of guns on the market I like this one I'm happy yes I'm just keep squeezing when you are let me hand off the trigger so a little trick with that it's just to pop it back when you're done just pull that back you can be pretty annoying so we got these here that I believe they're pretty good then the trick is just applying the right pressure and the right consistency with your motion until they've a nice beat okay so I think the variables here no so how big does the whole be and what does that anyone need to be on it 45-degree angle yeah would be the best way to put it but just so it fits the corner of the surface you're using okay so it involves to the corner and then just slide it on to the spot where you want to start start capping up squeeze the trigger and pull don't you go yeah after you put it on do you wipe it off you do yeah yeah yeah there's one finger so it gets get a rag nice Tim rag wet no way that's right it just Dan okay just water I can't yep now what you do once you finish that you just run your hand along it so if you have a little bit of excess on there don't walk on you won't be doing the rest of the rest of the gas they just spread it through you'll find you just want the hand ever toss it and it'll fill up so if someone makes an absolute peace ear this story can you stand it back yes you can yes do you have to have the right product side we understand of that there's different products on the market if you just use a normal gap seal up nice with sandable that will have it on the back there with this animal I recommend you get one of those this is the amount of times that you spend more time cleaning up for any gapping so that's cool give us a little gap that's right not like a silicon silicon that baby isn't silicon okay perfect all right so how far do you find is the best amount to do at a time I say shoulder width for a beginner okay so if you have another bit different to use that so but that's all right so just small spots once you get comfortable you find yourself getting more and more comfortable you can go through all the stretches but just say shoulder width right in front of your body there nice nice how long do I have to work probably a minute I would say before it gets started off okay okay why yeah smooth and level up back into a vein good alright thanks for tuning in make sure you're following me on Instagram to see my latest design and Renault inspiration you can find me at Naomi Finlay official or click the link in my description see you soon [Music]

Channel: Renovie with Naomi Findlay

Views: 185

Rating: 4.3333335 out of 5

Keywords: Naomi Findlay, Renovation, reno, remodelling, makeover, home, property, design, interior design, Space Medicine, DIY, How to guide, Furniture Makeover, paint, painting, interior styling, Styling, house renovation, house reno australia, house reno, flipping houses, diy

Id: 9MZ3-a5u3p8

Length: 8min 37sec (517 seconds)

Published: Fri May 22 2020