ā« Three-toned chime ā« Technology Connections is made possible by viewers like you. Check out the description for more information. ā« Three-toned chime ā« Iām here at Chicago OāHare International
Airport, but not to catch a flight. To catch a train. And not the blue line into the city, either. OāHare operates an automated shuttle system
that takes people between the terminals. They called it the Airport Transit System,
or ATS, but many people would call it a People Mover. Itās a fitting name ācause thatās what
it does. As I record this, there are five stations
just like these; three at each of the domestic terminals, one at the International terminal, and a final one at the remote parking facility. At the time of this videoās release, the
system has actually been shut down and wonāt reopen until the fall of 2019. Itās in the process of getting new trains,
and a new station at the Multi Modal Rental Car and Parking Facility. Whatever that is exactly. And it might be wise to remodel the existing
stations because.... 1993. In many respects, this system is like a sideways
elevator. As the trains approach the landings, the interior
doors line up with the landing doors and once they both open you have access to the train
and/or the platform. Then it moves along to the next āfloorā, lines itself up, doors open again, and it moves along. The vehicles have rubber tires and are more
like buses on a guideway than trains on a track. Here at OāHare the guideway uses a grooved
steel plate as a āroad surfaceā because, well, winter is a thing that happens here,
and a freeze-thaw cycle doesnāt really bother a hunk of steel. An interesting thing about OāHareās system
is that at each end, the trains switch sides to allow for a continuous loop of multiple
trains on the system. And a strange thing about the system, at least
the 1993-2018 version, is that trains seems to speed up and slow down at odd and unpredictable
times. And they accelerate a lot faster than you
might expect, wonderful for vehicles that are mostly standing room only. Hereās hoping that gets improved. Now, OāHareās peoplemover certainly isnāt
unique. Lots of airports have strikingly similar systems. In fact, Here at the Orlando International Airport,
youāll find not one but 5 people movers! Four of the them simply take people between
the gates and the main terminal building, while the fifth one is new and does something
else. In many ways theyāre just like the OāHare
system. Similar doors. Similar trains. Similar guideway-- though here a concrete road
surface is used because winter isnāt really a thing that happens here. Four of the people movers simply move people
back and forth between the main terminal building and the gates themselves. Itās a very brief journey, so there are
only two trains and they just go back and forth. And sometimes they only run one side. Recently, the trains on Airsides 1 and 3 were
replaced with Mitsubishi Crystal Mover vehicles, so although this looks to be the more modern
of the two systems, the track and other infrastructure is actually older. Airsides 2 and 4 were built later and use
Innovia APM 100 vehicles from Bombardier which, donāt worry, will appear later in this video. Iāve always liked the layout of this airport,
though it should be noted that these people movers are in the sterile area past security
unlike OāHareās which are outside of it. The fifth and final people mover was just
added in 2017, and it currently takes travelers to, well, not much more than parking at this
point. But eventually, the completed Intermodal Terminal
will provide train service to Miami and other areas on the proposed SunRail and BrightLine
extensions. At least thatās the plan. Interesting I should find myself in Orlando
in a video talking about people movers. I wonder if thereās a noteworthy peoplemover
somewhere near here that might have something to do with the title and purpose of this videoā¦ Oh, right. Here at Tomorrowland at Disneyās Magic Kingdom
in Florida lives the Tomorrowland Transit Authority Peoplemover. Originally opened in 1975 as the WEDWay Peoplemover,
this system has been taking literally millions of guests on a grand circle tour of Tomorrowland,
and remains a fan-favorite of many, including yours truly. This WEDWay PeopleMover is actually Disneyās
second peoplemover, with the first now defunct attraction makings its debut at Disneyland
in 1967. Its roots come from the Ford Magic Skyway
attraction at the 1964 New York Worldās Fair which was designed by WED Enterprises. WED, by the way, stands for Walter Elias Disney. After observing equipment used to move steel
ingots around Fordās steel plant in Detroit, Walt Disney wondered if this could be adapted
into an attraction. And it was, for Fordās Magic Skyway. Actual Ford cars, with their engines and transmissions
removed, were used as ride vehicles. The car bodies were pushed along a track by
spinning urethane wheels which rubbed against flat friction plates on the bottom of the
cars. The attraction was a hit, but most importantly
the propulsion system proved to be effective. When it came time to use this technology in
a more permanent attraction at Disneyland, Ford wasnāt that interested in a sponsorship,
so instead the Goodyear Tire Company came along, and the urethane wheels were swapped
for rubber tires. How fitting. The idea behind Disneyās peoplemover was
to actually be a real mass transit system (and this is probably why Ford didnāt want
to sponsor the attraction at Disneyland, as mass transit usually isnāt too good for
car sales). Though it wasnāt known to the public, Walt
envisioned systems like these to form the backbone of the transportation networks in
his never truly realized Experimental Prototype Community of Tomorrow, or EPCOT. Although the Disneyland PeopleMover wasnāt
the first transportation device to be called a peoplemover, it is likely that its popularity
as an attraction is responsible for the continued use of the word āpeoplemoverā to describe
similar transit solutions. One of the more novel ideas from the peoplemover
was that the passive vehicles, not requiring a power source of their own, could truly never
stop, and indeed that was the idea. Just like the still-operating version in the
Magic Kingdom, rather than come to a stop, the vehicles would slow down as they approached
the station, and join a continuous chain of cars traveling at the same speed as the moving
platform next to it. Then, after making its way around, the trains
at the front would accelerate, and break away from the chain. When it came time for PeopleMover Version
2 at the Magic Kingdom, the spinning rubber tires were dropped in favor of the much more
futuristic looking linear induction motors embedded at regular intervals along the track. These motors, in addition to creating delightful
60 Hz harmonics, generate electromagnetic fields which interact with metal plates on
the bottom of the trains and push them along. [Sound of propulsion system] The ditching of the tires, by the way, resulted
in Goodyear not wanting to sponsor this version of the attraction. First they destroyed the car. Then they went for the tires. Now, using linear induction motors isnāt
new, but in an application like this it was certainly novel. The LIMs themselves are essentially just a
bundle of some copper and iron. Because the trains take the place of the rotor
in a conventional motor, the propulsion system effectively has no moving parts. I suspect itās for this reason that the
attraction is still operating, as opposed to the Disneyland peoplemover which suffered
a ratherā¦ tragic fate. I canāt see how maintenance costs are going
to be very high for this attraction. But this peoplemover, although it is the second
of the two Disney PeopleMovers built at a Disney theme park, is only the second of three
Disney PeopleMovers. Thatās right, Disney built a third one,
but itās not here. Instead, itās right here at the George Bush Intercontinental Airport
in Houston, Texas. In what can only be described fairly as a
basement, lives a legit Disney PeopleMover, though at first glance you might not realize
it. The Subway, formerly known as the Inter-Terminal
Train, takes travelers between the terminals, and also makes a stop at the Marriott hotel. Like Disneyās PeopleMover, it travels in
a continuous loop , however in this case there are multiple platforms. Rather than just the one. And also like Disneyās PeopleMover, it was
built by WED Enterprises, now known as Walt Disney Imagineering. The history of this peoplemover is kinda weird,
and honestly not that well known. There was a system before it traveling the
same route, but apparently someone in charge of the airport wasnāt very happy with it
for some reason. Disney had set up the Community Transportation
Services Division of Walt Disney Productions in order to try and sell the Peoplemover system
to local governments or, perhaps, airports. And Houston appears to be the only buyer. This system went online in 1981, six years
after the original WEDWay Peoplemover opened at the Magic Kingdom. Now for those of you shouting to yourselves āOoh! Ooh! DC! DC!ā Hold your horses. Weāll get there. One glance at the track and youāll immediately
recognize the same propulsion system from Disneyās PeopleMover. The linear induction motors simply push these
passive trains along, and their small wheels and track enable them to navigate surprisingly
tight corners. Supposedly thatās why Houston was intrigued
and got Disney to build this for them, as the required track layout given this space
included a lot of tight and sudden turns. The similarities donāt end there. Just like at the Magic Kingdom, pre recorded
announcements emanate from the ceilings by way of simple loudspeakers, and the tops of
these vehicles are made of a mesh screen that allows the sound - and light - to pass through. [ANNOUNCER: You are at Terminal D and E. Hold on to the handrails. Your next stop will be Terminal C] The overall sounds of the propulsion system and general feel of the vehicleās movement
is obviously the same as the classic Disney attraction. [sound of propulsion system] But there are some notable differences. Most notably, the vehicles themselves are
enclosed and significantly larger. So there actually is standing room in these
cars. As you can see I can walk around in there,
and the bench seats are wider than Disneyās PeopleMovers. They seat probably three across, if you were
pretty tight, so the capacity of 12 people in these vehicles is totally believable. The need to enclose them is understandable,
as the airport runs this system pretty much unattended, as opposed to the Disney attraction
where the entire track is monitored by a CCTV system and a plethora of cast members are
ready to intervene at any time. And of course, the vehicles would have to
be larger in a real-world scenario because there are people with bags and things that
need to use this, rather than the cozy 4 person compartments of the PeopleMover attraction. The second and possibly most significant technical
difference is that the vehicles actually stop at each station, and a set of curtain doors
block access to the track. This complicates things more than it might
seem at first, as now there needs to be a separate mechanical system for opening and
closing the doors, as well as a modification to the propulsion system to allow for controlled
stops. If youāve ever been on the PeopleMover at
the Magic Kingdom during a stop, youāll know that itās anything but controlled. Your vehicle usually ends up going backwards
for a bit, before sorta drifting to a stop. My guess is that during a stop, the motors
are simply reversed for a set period of time, slowing the train, but also throwing it back
a bit as a result. And sometimes during startup, your train wonāt
move and the one behind you will just ram into yours. Iām not kidding, Iāve been in a PeopleMover
collision, thatās the reason they have the bumpers on the ends of the trains. Itās harmless but... startling and they
did have to shut down the ride after that. We were escorted through that particular door
and ended up in a gift shop. So thereās a fun piece of trivia for you. Having finally had an opportunity to ride
this system, it appears as though the motors simply shut off when the train is close to
the platform, and a friction brake grabs hold of the train when itās correctly aligned. The system is surprisingly good at lining
up the trains. I only noticed a deviation of a few centimeters
in most cases. [Motors] [Silence] [Sound of door opening] One of the key ways you can tell this is the
same system as Disneyās is that the motors get closer together at every point the train
changes speeds. Iām not entirely sure why this needs to
happen, but I think it has to do with the fact that the motors are simply being run
on 60 hz AC current. The only way to affect how quickly they push
the train is to change the motorās design, and these bundles of motors probably serve
as some sort of transition area between the high and low speed sections. Youāll also notice that in Houston, the
stations are all equipped with closely-spaced motors, which may be a requirement for a controlled
stop and start. Now before I start talking about all the downsides
of this little oddity, let me first say that Iām really glad PeopleMover technology made
it outside the Disney parks at least once. There are a lot of potential advantages to
this system. For example, the propulsion system itself
has virtually no moving parts. The only things that would āwearā on the
system, in a traditional sense, are the vehiclesā wheels, the articulation points between the
cabs, and the doors and door mechanism. The linear motors themselves also provide
a strong level of redundancy. I would imagine that if one of them fails, itās not really going to wreck anyoneās day. The trains are much longer than the gaps between
the motors, so it would almost certainly have enough inertia to catch the next one. Of course this is an assumption, but Iām
willing to bet that this system requires quite a bit less maintenance than a conventional
one. But, now we have to talk about the downsides. Letās start with a limitation that may not
seem so obvious at first-- both Disneyās PeopleMover and this one in Houston are indoors. Yes the track at Disney might get wet in the
train, but the PeopleMover has a roof over its head the whole way, and it is actually
considered an indoor attraction, which means it doesnāt shut down in stormy conditions
like outdoor attractions do. Oh, you wanted proof? Here ya go. [sound of pelting rain]
[ANNOUNCER: ...grand circle tour of Tomorrowland. Along the way, you can preview many of the
exciting places youāll want to be sure to enjoy today while visiting this land of tomorrowā¦] Getting a bit wet is about all these could
take. Without some way of heating the track and
the rails, using a system like this in a snowstorm would likely be a disaster. You might have also noticed that both here
in Houston and in Orlando, the entire course has no elevation change. Itās a completely flat experience, likely
due to simple engineering challenges associated with using linear induction motors. The original PeopleMover in Disneyland had
a course with quite a few inclines, however it had the advantage of those rubber tires
pushing the trains along. And technically the course is still there,
itās justā¦ in a sad state. And letās be honest here. The Houston Subway system, while novel, is
also a littleā¦ how can I put this kindly? Derpy looking. Itās unusually small, with odd looking trains,
and a whole lot about it is just weird. Like the fact that along the entire course,
thereās only a half-height wall, except at the stations where the curtain doors were
made full-sized. Not sure why it couldnāt have been smaller. And even simplerā¦ itās a weird little
thing going through a basement hallway. Sure, it does move people, and itās handy,
but likeā¦ itās also justā¦ well honestly a little creepy. At least its setting. But it gets worse! The SubWay is borderline redundant at this
point. The airport already has a MUCH more modern
people mover system which takes people between the terminals. This one's on the other side of security,
in the sterile zone, so you can get between the terminals without exiting security. ā« three-tone chime ā« [ANNOUNCER 1: A train is arriving. Please keep clear for passengers exiting the
train] [ANNOUNCER 2: El tren estĆ” por llegar. Por favor, permita espacio para los pasajeros
que salen del tren.] ā« single chime ā« If you were a traveler with a connecting flight
in another terminal, youād be much better to stay within the sterile area and take this
one. Itās also handy for the simple case of wanting
to grab food from a restaurant thatās in another terminal. Because for most purposes the SkyWay is frankly
better, the fate of the Subway isnāt that certain, although it was recently renamed
and had its announcement spiel changed. And I was quite surprised to see many people
still using it. It does get some love, but who knows for how long. But hereās the thing. This system, while it does have a bunch of
potential advantages, also has a lot of serious downsides. The idea of making the vehicles completely
passive, just a box on wheels essentially, could potentially reduce maintenance costs,
but it turns out that there are very few situations in which thatās actually a good idea. It either needs to be indoors like this, or outdoors in a place with perpetually
warm weather, like Orlando. Back in Chicago, this wouldnāt fly. Well of course not thatās what the planes
do, but I mean that a passive vehicle in sub-zero temperatures is just unacceptable. It needs to have some source of power for
heat if nothing else, and if youāre going to provide it with an electrical source via
bus bar or third rail, you might as well stick motors in the train, too, and have them propel
themselves. So while I do think itās great that Disneyās
PeopleMover technology made it into the real world at least once, Iām not really surprised
that this is the only time it happened. Maybe one day there will be more implementations
for a passive train with linear induction motors. Perhaps for goods transportation, or maybe
even baggage distribution inside an airport. But for actually moving people, this people
mover comes with a lot of asterisks attached. Remember how I said hold your horses about
DC? Well, it turns out that maybe, just maybe,
Disney built a fourth WEDWay peoplemover under the US Capitol building. Maybe. And probably not. But still kinda maybe. So it turns out there is a system of small
subways under the capitol building that transport representatives and senators between their
offices and the capitol. These subways have existed in some form for
over a century, but one of them was updated, probably in the 1980s. And, it uses the exact same vehicles that
we see in Houston. But, and hereās where it gets weirder, there
is no record of Disneyās involvement. And, there are some significant technical
differences. Iāve put a link to a great video of this
system in the description, and it you take a look at it youāll soon discover that the
LIMs are run with a variable frequency drive, which likely allows for smoother operation,
and certainly makes the system sound much different from the PeopleMover or Houstonās
Subway. Youāll also see that the motors are spaced
much closer together, and likely thanks to that variable frequency drive, they are spaced
at a consistent interval throughout. Iāve been trying to figure out how this
system is related to Disney or Houston, and Iāve gotten only the smallest of clues. A now-defunct company called Transdyn claimed
to have built the control and communication systems for the Senate Subway, and their parent
company, Powell Industries, is based inā¦ Houston, Texas. So, that certainly suggests thereās a connection
somewhere, but I canāt quite pinpoint it. Itās likely that Disney contracted with
a third party to build the vehicles for Houstonās Subway, as after all they do that sort of
thing all the time. And if that company was in Houston, and was
somehow involved with Transdyn or Powell Industries (or indeed was either of those two) then it
would make sense that the same trains would end up in DC. And indeed much of the same concept could
simply have been borrowed from the Houston airport design, as after all Disney didnāt
own any patents related to this PeopleMover system (at least, I canāt find any aside
from the original Disneyland system of wheels and tires). So, if you know how exactly the Senate Subway
and the Subway at Houstonās Airport are connected, please let us know in the comments. Itās driving me a little crazy, and there
is a very small amount of information out there about either of these two systems. But for now, I hope you enjoyed this look
into what might be the ultimate Hidden Mickey. I am really glad I got to head to Houston
to make this video while the Subway is still operational. Who knows, it might still be around for another
few decades. If itās as low-maintenance as I think it
is, thereās not much of a point to getting rid of it. And when you need to get from Terminal A to
Terminal E, it can save you from a pretty long walk. As always, a great big beautiful thank you
goes out to the folks who support this channel on Patreon, especially the fine folks you
see scrolling up your screen. Going to Houston specifically to film its
PeopleMover was something that I never thought was in the cards, but thanks to you, I could! If youād like to support the channel and
get perks like early video access, behind the scenes footage, and the inside scoop on
the latest projects, please check out my Patreon page. Thanks for your consideration, and Iāll
see you next time! ā« monumentally smooth jazz ā« Oh, thank god Iām at the right airport. Iāve put together a Technology Connections
2 video which is much more vlog-like and includes a lot of other observations I made around
the airports. Check it out through the card up above or
hang around for the end screen. Itās also down below in the description. Gonna do another walking take, as the people
stare at me because the ā« people in the airport think that Iām crazy! ā« Thatās OK, though. Crazy is good. OK, itās not in allā¦ itās not in all
circumstances, but sometimes it is. Heh. Yeah, Iām going down. [ANNOUNCER: ...is available 24 hours a day] Here-- [ANNOUNCER: The airport terminal buildings
have been designated as non-smoking areas]
But does it break down as often as the others do/did?
That's truly interesting. I have a real fondness for that thing. Me and my friends use to love to hang out in it in high school. It was a safe, desolate, unique place to hang out where we were never bothered. I'll be sad when it's gone.
I was born and raised in Houston and been going to IAH my whole life and never even knew there was a subway tram. Iāve always walked.
Every time I've used it it was after a late night flight when it was empty. Always gave me a dystopian 1970's sci-fi vibe like Logan's Run or THX1138.
Itās also the only place in the world it exists outside a Disney property.
Remind yourself of that the next time youāre stuck on it. No place on earth was dumb enough to buy one of these. No place on earth other than your home town connection to the world!
https://en.m.wikipedia.org/wiki/Subway_(George_Bush_Intercontinental_Airport)
Super cool. I think its quirky and unique.. I'm glad we have it! It is oddly abandoned but there is a way better in-terminal transit system right?
I like this guys stuff, and this video taught me this people mover is even weirder than I first thought. Good stuff.
Let's not forget that it was featured in the 1976 movie "Futureworld". The trailer https://youtu.be/lTMtu4Z5T-U
Also to note, most of the movie was shot around Houston.
Edit: Link to BTS at the JSC. https://youtu.be/uDbycwNJ9FY
Edit Edit: Link to movie showing tram. https://youtu.be/unbUMPWcKQM?t=849 (about 14 min in, link should start at correct time.)
Still heaps better than the AirTrain at EWR.