It’s 2017, and because I’m such a dedicated
techy committed to having the newest technology at my fingertips, I just got back from the
store with a fascinating piece of technology. This video cassette recorder. You probably think of the VCR as an uninteresting,
outdated piece of tech. But there’s some surprisingly interesting
stuff inside here. The VCR contains a device the solved what
seemed to be an unsolvable problem. Let’s have a look. In the days of analog television, the actual
signal that made up the images to be put on the screen wasn’t a set of instructions
on how to build an image using pixels. It was a complicated, high frequency signal
of continually varying intensity that contained rudimentary triggers to help a television
build a coherent image based upon the signal’s instantaneous strength which corresponded
to image brightness at a particular point on the screen. Anyway, an analog video signal is an insanely
high frequency. OK, it’s actually not that high by today’s
standards, but bear with me. The 5 megahertz signal of analogue television
made for a perfectly acceptable picture, and there weren’t any problems when it came
to everyday use. Except, that super high frequency meant that
recording the video signal was impossible. Let me explain. Magnetic tape recording, already in use for
recording audio signals from microphones, has its frequency response, that is how high
of a frequency it could reproduce, limited by its speed. Due to the structure of the tape itself, to
record a high frequency signal it has to be moving past the tape heads pretty fast. This isn’t a problem for audio signals,
as the highest frequency it needs to produce is about 20 thousand hertz, or 20 kilohertz. A speed of 7.5 inches per second is plenty
for this purpose. But video signals are about 5 megahertz, that’s
5 million hertz, much too high a signal to put on normal tape. Because of this limitation, TV shows tended
to be live and not pre-recorded. If a show was to be recorded before being
broadcast, it was usually filmed with a conventional motion picture camera, and then a device called
a telecine would be used. A telecine is a machine that can convert motion
picture film into a television signal. Aside from the necessary frame-rate conversion
that was accomplished by the machine, you can think of it as a glorified television
camera pointing at a movie screen. You could also use a kinescope, which was
basically the opposite, like pointing a film camera at a TV screen, the upshot of which
was that frame-rate conversion wasn’t necessary when playing it back due to an already matched
framerate. But using film wasn’t easy, and most importantly
it wasn’t cheap. It would be super convenient to put video
signals right onto magnetic tape which was cheaper and easier to use, not requiring film
processing and also being reusable.. But again, speed was a problem. In order to record video signals onto this
tape, it would have to be traveling at many feet per second. With this 1,200 foot spool of tape, you could
expect a recording time of about 72 seconds. It would look a lot like this during normal
operation: But that didn’t stop progress. At first, attempts were made to just make
a really-fast tape recorder. One such system, the Vision Electronic Recording
Apparatus, or Vera, was developed in 1952 by the BBC, the project being led by (now
here’s an awesome name) Dr. Peter Axon. The VERA used massive 20 inch reels that contained
15 THOUSAND feet of tape. That’s nearly 3 miles of continuous tape. Yikes. Even with that vast amount of tape, though,
the recording time was only 15 minutes because the tape traveled at 16.7 feet per second,
or over 11 miles an hour. If it wasn’t obvious that this was impractical,
it should’ve been. Other oddities exist in the linear-video-tape
world, such as Toshiba’s LVR system that used a loop of tape that moved very fast and
a head that slowly moved along the tape from top to bottom essentially making a spiral,
but for the most part the idea was abandoned because, let’s face it, this is just silly. So what could be done to practically record
video onto magnetic tape? There’s no getting around the fact that
the tape has to travel past the heads at at least a dozen feet per second or so to get
a reasonable picture. To solve this problem, the American company
Ampex, based in California, asked a brilliant question: Why not have the heads move past
the tape? Ampex’s quadruplex system used a rotating
drum containing four tape heads that sat perpendicular to the traveling path of 2 inch wide magnetic
tape. The drum, rather than the tape, is what moved
at a high speed. Spinning at a rate of 3,600 rpm, the heads
traveled past the tape very very fast, but the tape only moved at a speed of 15 inches
per second. By slicing up the width of the tape into small
parts of the video signal, the surface of the tape could be used much more efficiently. Electronics switched the output between the
4 heads allowing for a seamless video signal. The Ampex machine was a hit, and it quickly
became the standard format for television studios nationwide. But these machines were insanely expensive,
with the 1956 price being 45,000 dollars, equivalent to almost four hundred thousand
dollars today. Aside from costing more than a house, they
were also huge, about the size of a large chest freezer not including their many electronic
components mounted on racks. Not to mention, they were obviously very heavy,
along with being decidedly not easy to use, requiring training to operate them. Fast forward to the mid 1970’s, and consumer
video tape recorders are starting to appear. Betamax and VHS were the two most common formats,
with VHS eventually winning the drawn out format war. Both of these formats use similar technology
to the original quadruplex system, so let’s have a look at what’s on the inside. This is a run-of-the-mill VHS cassette recorder
from the early eighties. All VCRs contain a video head system similar
to the quadruplex system. That's it there. But before we get too involved in that, let's
have a look at the cassette itself. Any cassette tape is really nothing more than
Magnetic Tape stored inside of a plastic shell so it can be handled more easily and so the
machine can interact with it automatically. The audio cassette used a relatively simple
system of three access holes, located on the bottom edge of the cassette, that the erase
head, play head and pinch roller could fit inside of. This works fine for the relatively uncomplicated
process of moving audio tape past two stationary heads. But for a video format, the tape has to go
in many places and most importantly it has to wrap around the video Head drum. Earlier machines had to be threaded manually,
but that isn’t exactly consumer-friendly. To accomplish threading automatically, the
machine actually removes some of the tape from the cassette and pulls it through the
path of the heads. Cout-outs in the bottom of the cassette allow
for two spindles to stick up behind the tape. As the cassette is lowered into machine, the
hinged lid which keeps the tape away from grubby little hands is opened, and once play
is selected the spindles move toward the rear of the machine which pulls the tape past all
the necessary components. Let’s look at some of the components inside
without a cassette in place. The path the tape makes is in the shape of
an M. First it travels past this erase head. When recording, the erase head is energized
which removes any signals currently on the tape. It’s next stop is the video head drum. After being wrapped around, it exits the drum
and goes past two more stationary heads. These heads record the audio and a tracking
signal. These two signals are recorded along the edges
of the tape. Obviously the audio track contains sound,
meanwhile the tracking signal contains reference pulses to match each frame of video. The recorder uses the pulses to maintain the
correct tape speed when playing a tape back. It also allows for the machine to compensate
for slight differences between tapes recorded on different machines, enabling video tracking. Later machines used the tracking pulses as
a sort of timecode, counting each pulse to determine how much time had elapsed. The last main component is the capstan and
pinch roller. These components work together to squeeze
the tape between themselves. The capstan spins at a very precise speed,
and that’s how the tape is actually pulled through the mechanism. Cogged spindles engage with the spools that
hold the tape, but they only actually pull the tape with force when fast forwarding or
rewinding. Otherwise they simply serve to spool the tape
and keep it taut, with the capstan doing the real work. So let’s go back to the most exciting part,
the video head drum. Here lies the heart of the machine. If you remember the days of VCR’s, you probably
remember this sound. That’s the sound of the head drum starting
to spin. For machines in the US, it spins at about
1,800 rpm. One complete revolution makes one frame of
video, and since the framerate of US television is 29.97 frames per second, it spins nearly
30 times in a second. But where are the heads themselves? The heads are really tiny and hard to see. They are tucked away in the slit that separates
the two halves of the drum. All VHS recorders have at least 2 heads. Because NTSC video is interlaced, each head
records half of the video frame at one time. Upmarket VCRs would have 4 or even six heads,
with the extra heads helping to improve image quality by recording a more precise signal
tailored to the specific tape speed. You might have noticed that the head drum
doesn’t sit level with the rest of the machine. In fact it looks sorta like it was just tossed
in there and let to stay where it landed. But in fact the wonky angle is deliberate. If you look closely, you’ll see that the
head travels diagonally down the surface of the tape. One pass of the head, and thus one half frame
or field of the video signal, is recorded on this long distance of tape. This is called helical scanning. By running the heads along the tape in this
fashion, the tape didn’t have to be nearly as wide as the 2 inch tape tape found in the
quadruplex system, and it also meant that one pass of the head contained an entire field
of video. See, because the quadruplex system broke up
the fields into multiple sweeps, requiring 16 head passes per full frame of video, it
wouldn’t produce any sort of intelligible picture unless playing at the appropriate
speed. This meant fast forwarding or
rewinding was done blind, and freeze-framing wasn’t possible. Using one sweep for one complete field eliminated
those problems. If you could see the information on the tape,
it would look like this. Two linear tracks are present at the edges,
and a bunch of long, diagonal lines fill the middle. Each of these lines is one half of one frame
of video, called a field. Each field fills in the whole screen, but
only every other line of the image. Every sweep of the heads along the helical
path of the tape made half of the image, with the other head sweeping by to create the other
half. The VCR would automatically switch what it
showed on the television back and forth between the heads, creating an apparently seamless
image. Now here’s an interesting question. How is the machine able to actually read the
tape? If the heads are spinning around, they can’t
have wires attached to them like these stationary heads do or they’d tangle. Early video tape recorders used what’s called
a slip ring pickup, essentially a set of thin wires that brushed against a spinning ring
which was electrically connected to the heads with wires. These proved problematic, however, as corrosion
and wear would introduce noise to the signal. By the time VHS was invented, rotary transformers
were used to provide a wireless coupling between the top and bottom halves of the head drum. The actual slices of tape that made up the
signal are very thin. The tape traveled at only 1.313 inches per
second, and with 60 slices of video fields squeezed in the space, you’re looking at
a slice width of about .022 inches or just slightly more than half a millimeter. To help avoid interference between the tiny
tracks on the tape, the heads were assembled with different azimuths, that is different
angles between the tape and the head. Rather than hitting it straight on, one head
would hit the tape at plus seven degrees, and the other at minus seven. This created destructive interference between
the tracks, thus ensuring each head picked up only what it was supposed to. This became even more important as the Long
Play, LP, and then Super Long Play, or SLP recording speeds were introduced. LP halved the normal tape speed and thus halved
with width of the track, with SLP only being a third the standard speed. This doubled and tripled the amount of time
you could record on the tape, but it reduced the quality of the image noticeably, particularly
when recording at the SLP speed as now the width of the tracks created by the heads was
less than 2 10ths of a millimeter. The tape-to-head speed of consumer formats
wasn’t quite fast enough to reproduce broadcast quality images. VHS had a bandwidth of only 3 megahertz, compared
to broadcast bandwidth of 5. This meant that the quality of the signal
coming from the tape wasn’t quite as good as live tv. Are you ready? This is VHS quality. No joke, this has been recorded onto a VHS
tape, fed through a capture device, and then back into this video. If you’re not watching full-screen, you
should be. It’s awful. But keep in mind that back in the day we weren’t
using massive TVs with 4k displays, let alone even 720 p. On an old tube-set, this quality was perfectly
adequate. Let’s talk about those different recording
speeds, shall we? This is what you could expect from a recording
made at the standard play speed. This is the best picture you’re going to
get, and it goes downhill from here. Now I’ll switch to LP. LP’s not terrible, but sound quality got noticeably worse. Now here’s SLP. However, the later development of VHS-HiFi,
which stored FM stereo audio within the video signal of the tape using a second set of heads
on the video drum, meant that sound quality was constant even with an EP tape, and it’s
really good, too. VHS HiFi has a full 20 to 20 kilohertz frequency
response, excellent signal-to-noise ratio in addition to dynamic range, and excellent
stereo channel separation as well. It was very close to CD quality, with many
people (myself included) not being able to tell the difference. Thus the best way to play 8 hours of music
nonstop in 1985 was to record your favorites on a T-160 tape running at SLP speed on a
hi-fi equipped VCR. The only caveat to VHS-HiFi was that because
the audio was recorded along the helical scanned portions of the tape, the source of the sound
had to switch back and forth with the heads. Our ears are actually far more sensitive to
gaps in information than our eyes, so if the tape was damaged or the heads didn’t line
up quite right, you would hear a low 60hz buzz. Ordinarily, though, this was a fairly rare
occurrence. As a side note, for reasons I don’t really
understand, the LP speed disappeared from many VCRs. Though all but the very earliest VHS recorders
can play back a tape made at the LP speed, few made after the 1980’s could record at
LP. I remember as a kid in the nineties being
bummed when our new VCR couldn’t record LP, as I found it a nice compromise between
recording time and picture quality. Oh well, I guess only nineties kids remember... The longer recording time available on VHS
was the main reason that Beta didn’t win the format war. Sony’s decision to use a smaller cassette
with less actual tape inside meant that the longest tapes typically held was four and
a half hours, compared to the eight + possible with VHS. VHS was continually improved during its life,
with the most noticeable improvement being the S-VHS standard released in 1987. S-VHS, short for super VHS could record a
5.4 megahertz signal with improved tape formulation and recording techniques, actually providing
a better picture than broadcast television. This was only half-true, though, because while
the luminance bandwidth was very good, S-VHS did not improve the color rendering of standard
VHS. See on VHS and beta as well, the bandwidth
required to make the image was dedicated mostly to luminance, or a black-and-white signal. VHS used a “color-under” encoding method
whereby color data, recorded after the luminance signal, was essentially drawn on top of a
black and white image. This was done to prioritize image sharpness
with the limited bandwidth available. The resolution of this coloring was by contrast
quite poor, on the order of just 12% that of the black and white detail. So while the picture of S-VHS was sharper
than broadcast tv, the color rendering left a lot to be desired. Partly because of this, and along with the
significantly higher price tag of S-VHS machines and media, S-VHS never really went anywhere. Standard VHS was good enough. You might be surprised to learn that toward
the end of VHS’s life, D-VHS was introduced, with the D standing for Digital. It is certainly possible to record digital
data onto magnetic tape, and the D-VHS equivalent of a standard T-120 tape could hold 25 gigabytes,
the same as a single layer bluray disc. In fact, the D-VHS standard included support
for 1080i video. You should definitely check out these video
clips from one of my favorite YouTubers Techmoan, where he shows a demo tape with HD scenes
of New York from 1994. It actually kind of jarring to see street
footage of that age in that clarity. As I close this video out, I hope that you
can admire the ingenuity in these old machines. These intricate mechanisms and the out-of-the-box
thinking that led to their creation are just more fun. The video head drum solved an unsolvable problem
in an ingenious fashion, and the intricacies involved in the machine just to get the tape
to wrap around it are far more interesting to me than a laser diode and optical pickup
reading data off a spinning disc. We’ll be exploring VHS and Beta as well
in more detail, and I’ll also be discussing the format war between them in later episodes. Thanks so much for watching, I hope you enjoyed
the video! If you did, be sure to give it a thumbs-up
and subscribe to technology connections! I’m doing my best to keep video like this
coming your way. I’ll see you next time!
This is the vid for you if you've ever taken a VCR apart.
very good explanation, I never realized that the reading heads were switched multiple times per seconds and that they were moving at high speeds