Temperature and Humidity Monitoring using DHT11 Sensor and Blynk IoT App | ESP8266 Blynk IoT

hi everyone in this video I'm going to make temperature and humidity monitoring system using dht11 sensor and blink app if you're new to this Channel Please Subscribe and turn on the Bell button to get the notification of new videos we need espa 266 node MCU board dht11 sensor 16 into 2 LCD display with I2 C module and a breadboard first place the espa 266 board on the breadboard [Music] connect 3vt pin with breadboard positive terminal and ground with breadboard negative [Music] terminal then place the ht11 sensor on the [Music] breadboard connect VCC of dht11 with breadboard positive terminal and ground with breadboard negative terminal then connect data pin of dht11 with digital pin D4 of as8 [Music] 266 connect to jumper with SDA and SC pin of LCD display connect sd8 pin of LCD display with E2 and with E1 pin of esp8266 six then connect VCC and ground of LCD display with breadboard positive and negative terminal respectively so the hardware connection is done let's set up the blink web dashboard search blink cloud and Google go to the blink website if you don't have any account then you need to create an account [Music] [Music] after creating an account you will see this interface go to developer Zone you need to create new template [Music] [Music] after creating template you need to set up the web [Music] dashboard take to [Music] gauge go to gauge settings create data stream select virtual pin follow the next steps as like I'm doing [Music] [Music] [Music] [Music] now save the dashboard now go to device and create device for the system [Music] after creating device you can see the template ID token has been created copy them now coming in the code replace the previous template ID and token ID with new template ID which I've copied from [Music] blink dht11 is connected with E4 pin enter your Wi-Fi name and SSID and Wi-Fi password and pass [Music] enter proper virtual pin for temperature value and humidity value you can get the virtual pins in [Music] blink now select the board and upload the code [Music] open serial Monitor and see the temperature and humidity [Music] value then go to Blink server and see the temperature and humidity data and [Music] blink values are similar with serial monitor [Music] value Now set up mobile dashboard to observe temperature in Mobile install blink app and log [Music] in you can see the template I've created in web now create mobile dashboard follow the next steps as like I'm doing [Music] now see the result in LCD display and blink [Music] app thank you for watching

Channel: Aslam Hossain

Views: 758

Keywords: Temperature and Humidity Monitoring using DHT11 Sensor and Blynk IoT App, ESP8266 Blynk IoT, DHT11 Sensor and Blynk, Blynk IoT, esp32 blynk, iot project, blynk esp8266 dht11 sensor, blynk with nodemcu dht11 sensor, dht11 sensor, sensor, blynk esp32 temperature sensor, sensor data, esp8266 dht11 sensor, dht11 humidity and temperature sensor, tempretur and humidety sensor, blynk esp8266, blynk 2.0 esp8266, esp8266 with blynk, blynk iot new esp8266, nodemcu esp8266 blynk iot, IoT

Id: wW8Lb6Ovnv4

Length: 8min 57sec (537 seconds)

Published: Wed May 22 2024