Solve the stair problem in #revit #revittutorial

are you annoyed that stairs and rabbit always seem to have this little Gap well this is something that's actually quite easy to fixed let me show you how first let's create the stair by clicking on the stair tool and then in the properties panel I'm just going to set this to a monolithic stair now this is where the magic happens you want to go here where it says stair click to expand the menu and then click on new stair runs here you want to find the end with Riser parameter and make sure that this is jacked off you can apply it go back to Stair which is going to give you the regular settings make sure everything is in order and then you can model yours there here I'm just going to align it with this floor which we have above and now if we open up the 3D view you can see this is the desired result and the stair is going all the way up and we're finishing up with a thread which is in line with the floor

Channel: Balkan Architect

Views: 17,349

Keywords:

Id: 6WyJju_xRjg

Length: 0min 55sec (55 seconds)

Published: Thu Jun 15 2023