Solidworks tutorial | sketch motor in Solidworks

welcome back to Caryn tutorial today we are going to model a simple motor in SolidWorks we will see how to make each and every part and assemble at the end it is simple model for beginners so let us start how to do in SolidWorks [Music] welcome back to cardigan tutorial today we are going to start our part of motor first part front cover so let's start choose top plane sketch select circle and draw one circle from origin point tip diameter 130 mm okay now select extruded boss 170mm reverse direction okay now choose chamfer distance distance 40mm select this outer surface a sketch now select shall keep to MN we want to keep 2mm wall select this portion okay now it becomes hollow see now choose front plane plane and we want to create one plane here keep distance 75 mm select okay now select this plane sketch normal now select corner rectangle and draw one corner rectangle now exit from the rectangle select centerline and draw on centerline now exit now select this line this line and center line and click here symmetry now this symmetric now assigned distance keep 2.5 mm okay now select excluded boss select up to next reverse direction up to next see reverse direction of to next okay now hired this plane to circular pattern select this cutout choose this as axis and we want 35 number of since this is heat resistant since okay now see it is created now select section view okay select front view sketch normal now select a line and draw a line from this point to this point now is it again choose this line select up to this line this point and up to this point now exit from the line and to this line horizontal this is already horizontal now select now delete this line again choose a line and define from here to this line and up to this point now delete and delete this excess line now okay select this line choose vertical okay now select dimension select this line keep 2.5 mm okay now select one centerline and draw on centerline select with all new cut okay now exit from the section you see this outer goofin almost ready select this face is sketch normal now draw one circle here and keep diameter 20mm select extruded cut keep through all okay now select right plane choose plane and we want to create one plane from this near 200 mm okay now select this plane is sketch normal select corner rectangle and draw one cook rectangle here now we will assign dimension 60mm 60mm okay now select central line and draw on center line from origin point now select this line this line and center line make symmetry okay now assign distance here to this line select 30mm okay now go to feature select extruded boss choose reverse direction and select up to next this is the up to next select okay hide this plane sorry hide the plane now this is the front cover up for our mortar we will assign some color to it select okay now this is the color now we will save it as a front cover saving desktop okay now we will make one cut out here so select this face is sketch normal now select convert entities now this phase converted select offset entities select this face keep 4mm reverse direction okay now select extrude it cut select here this portion and keep 30mm inside select okay now our motor cover is ready I hope you enjoyed save it now we will go for next part we will make another part new part okay just change background now select top plane is sketch this is back over we are going to sketch a back cover circle I draw one circle tip diameter 150 mm okay now select extruded boss extend up to 85 mm okay now choose chamfer select distance distance 20:25 mmm select top face sketch now select she'll keep - mm and select back face okay now this is our back cover now select this face sketch normal select corner rectangle and draw on rectangle now assign distance five mmm five mm okay select extruded cut choose true world okay now we created one hole now we will make multiple number of holes so there is one command fill pattern this pattern selected we will select this pattern and select this boundary now see it is showing the pattern we will decrease see there are multiple numbers gasps keep zero so all area will cover select okay now see there are many holes now select this face sketch normal draw one circle and keep diameter 130 130 mm okay now select extruded boss keep reverse select up to next and keep thickness keep thickness 1.5 mm inside no keep outside select okay select this part go to appearance and select this okay now this is our back cover save it back cover so this is our front and back cover ready we will see our next part welcome back to CAD cam tutorial now we are going to make another part for motor assembly so let's make cover so choose top plane sketch now drawn Center rectangle and assigned distance 60 by 60 okay now select extruded boss select up to 15 mm okay now make chamfer three mmm top and select this all pages okay now choose she'll keep three mmm select the back back face okay now assign color to this part okay now this is the color for our top power of motor and save it as a cover motor now we will make another part select top plane sketch now we will make motor rotor sorry select circle and draw one circle and keep diameter 19 mm okay now select extruded boss extrude up to 200 mm select okay now select this face is sketch and drawn circle here and keep dimension diameter 60 mm okay now select this circle convert entities okay now select extruded boss keep reverse direction and select 70mm and okay reverse direction 70 mm that's it select okay now select this face sketch normal select a line and draw one geometry from here to here exit now just we want to cut it all so just select extrude cut select through all okay now choose circular pattern select this as a axis keep three numbers of cut out we want three number of cutouts extruded cut selected okay now the whole body we will select some material we will choose some metal like steel okay this is the steel some surfaces we will change color surfaces we will make some copper the surface and select this surface okay select this surface copper this surface copper this is our state of sorry these are rotor so save it as a rotor now make another part now we are going to make this tater so select of plane is sketch and now we will do one thing select circle and draw one circle from origin point assign diameter 60 mm okay now select extruded boss select 70 mm and choose thin feature 30 mm outside okay now assign polished copper or there is one more copper certain finish okay sandblasted copper now save it as a stator okay now we will make next part choose top plane sketch select corner rectangle and draw one rectangle from here now again draw one rectangle now exit now assign dimension 160mm the PMM 55mm and this length 130mm and this length keep 50 mm okay now select this line and this line : here okay now select trim trim inside parts inside lines okay select extruded boss select 30 mm deep angle 40 degree okay now select this face is sketch normal select corner rectangle drawing on rectangle select extruded boss 10 mm but keep reverse direction okay now we will make mirror so select mirror select this face choose the body select okay now this mirror select front plane a sketch normal drove on centerline exit choose a circle and draw one circle now exit assign diameter 160 175mm okay now select this circle and this line tangent okay now select extruded cut choose net plane select okay now select the whole part and assign color blue okay now save this part as I spend now let's go for assembly now you forget to do some modification select this edit assigned distance between this keep 65mm only select exit see now save it I did and select this distance tip 150mm exit now our base is ready the whole ways we selected we will select little dark okay now save it forest and welcome back to CAD CAM tutorial today we are going to start motor assembly in our last lecture we created all the parts so let's start - new assembly now browse all the parts select this all parts select open now open one by one Jews plane select this part fixed okay select floor now rotate this part okay now choose met select this and inside okay now select inside and this keep symmetric okay now select this inside and this one make drivers okay now you can little drag inside no problem now you can drag it here select this top surface and select this surface choose okay the surface and the surface okay the surface and the surface okay now the cover is fixed now we need to fix this select rotate okay now just drag it here okay now select this part motor front cover and and it part okay for save save as assembly motor assembly exit open part now we want to do some modification here select right plane is sketch choose normal select section view okay now select corner rectangle select 20 mm okay drag it little up to this line okay select one centerline and draw a center line from origin point now select revolve occur we are going to cut through this okay section you see this portion is created now cancel select changes in front cover yes now changes in assembly yes now see in assembly it is already cut now select this face met this face but keep some distance select 2 mm okay okay now we want to fix this face select this line met we are looking some parallel line which helps us select this this line choose parallel not coming perpendicular clear select right plane can select this face choose parallel okay select okay now our motor assembly ready this is the or motor we made in SolidWorks I hope you enjoyed this tutorial don't forget to share and like this video thanks for watching

Channel: CAD CAM TUTORIAL BY MAHTABALAM

Views: 154,476

Keywords: Solidworks, tutorial, sketch, motor, in, Solidworks tutorial, sketch motor in Solidworks

Id: Zd8EXeRUq7o

Length: 31min 17sec (1877 seconds)

Published: Fri Dec 16 2016