Rodecaster - Recording with a Laptop

connect your laptop using the provided usb cord or borrow a usb-c usb-c cable from the service desk turn on the road caster and turn multi-track recording on if you're recording each mic to a separate track when recording in multi-track using logic or other digital audio workstation software you'll need to go to preferences and check your audio input make sure road caster pro multi-channel is selected as the input you will keep road caster pro stereo as the output for each track you create you will select the input on the road caster that you would like to record the mics are inputs 3 to 6 in the software use this chart available on the rode website create a stereo track with inputs 1 and 2 in the software to record all the inputs as one serial track this will be the only option if you have selected road caster stereo as your input if you are using garageband make sure to right-click the track and select configure track header then select record enable press the record button on the track to test the levels and activate it for recording you can adjust the levels by moving the fader for the input on the road caster to listen to your audio in the software through the headphones in the room you'll need to check that your device audio settings have row caster stereo selected as the output you'll need to move the usb slider up to hear the software audio output through the room's headphones you can only record in stereo using audacity remember to save your project when you are finished recording for guides specific to each software search for the software name in the technology supports page under research support on the library webpage you

Channel: MRU Library

Views: 5,434

Keywords:

Id: YM7czhK95no

Length: 2min 10sec (130 seconds)

Published: Fri Jul 16 2021