Ork spaceship. Warhammer40k.#scratchbuild #howto

[Music] hello there my name is Aaron and I a Guai who likes to build things out of old toys and everyday junk and this week I got my hands on some cheapest chips water pistols so you know what that means let's start scratching that build so this is what I managed to buy back from the well it used to be called a € store it's now probably around 23 a pop for each toy but anyway um these are the water pistols I don't think I'm going to be using these smaller water pistols from this build but um yeah this I could use for a different project so I'll probably just uh take them out the packet have a look at them and uh put them to one side I kept this in so you could Marvel at a grown man struggling to open a plastic pack bag uh ridiculously uh there we go it's open now dear God Almighty what a meal I made of that anyway I'm going to put these to one side and it's the bigger gun that draws my attention um oh yeah cross-head screws excellent I use my flae headed screwdriver to uh get this bad boy open with it took a while but uh I got there eventually and uh now let's just manage to get this PR open I don't know where my spudger is so I'm just going to use my screwdriver uh anybody that doesn't know what a spudger is uh a few videos back I did an explanation of what a spudger is so uh go check uh one of the older videos out yep so look at all these bits and pieces that are from this that won't come off why won't that come off I can cut that off um yeah always meles um um how much Gr you get from uh these water pistols anyway that's all that and I did buy another one because these were €250 each so I do have uh another one of the same so I'm going to be doing the same to the second one as well but I'll do that off camera I'll spare you okay I'm going to make some alterations to this uh mimit firstly get this label off and then uh chop away some of the little uh Little Bits that are poking out and uh it should be ready oh yeah and I'll also uh take the handle off so we'll have a quick uh Montage of that and once I do a couple of twists there we go the handles off and uh yeah that came away cleanly these are the innards of the uh water pistol and I just want to take these uh Little Bits off because I'm going to use these gelies um yeah I'm going to reattach these uh somewhere else and they fit perfectly right there so that's where they're going I glued the outers together and uh for more uh to make it stronger basically I used a bit of styrene just along the edge just so it won't snap off my apologies about the naration I did uh write a script but um I've um again spilled tea over it and uh the ink is uh uh sort of uh disintegrated so uh this is off the cuff now so I've got these gaps on the side not sure how I'm going to do this uh might put some star in there uh probably will actually I wanted to put it on the inside so it was a little of a lip but um yeah forget that that's too much hard work so I'll just stick it to the outside oh hello um juice lid uh you get them on uh juice uh bottles for babies and stuff like that uh I stole this from a baby um made it cry yes that is right I made baby cry but uh at least I got my juice lid and that is going to be the start of an engine I'm not entirely sure where these came from but they uh fell off an old build and uh I'm going to repurpose them because that's what I do here I recycle I think they look like vents they look like vents don't they yeah so we'll call them Vents and I'm going to put these vents either side um onto the uh ship I saw my Kinder Egg uh pimp uh this morning and got a bag full of Kinder Eggs these are um the other Kinder Eggs I think these are for Hot Wheels I do believe I could be wrong but uh these are going to be canisters that I'm going to uh use for the side of the spaceship I'm just going to gble them up and um put some uh uh beads on just to make them more interesting now these are the proper kind uh containers and um I've noticed that uh they um they when you pop them the lid stays on um the old style used to pop off so you could uh twang them uh against somebody and get them in the eye so I kind of guess because of that they uh made them stick on so you just cut off the top and I'm using the tops just for either side of the build now now the green part is going to be the bit that's going to be in the middle um just going to test it to make sure it looks uh looks all right um so yeah looks all right it will fit which is good um but we're going to forget about that for a while now and concentrate on the main body instead I have an idea for the uh back engines and this is all the bits and pieces I'm going to be using for the uh for the back bit going to extend it slightly um and I've got a new idea I'm going to uh make it so because it's kind of like an orc spaceship um I'm going to have um it sort of the spaceship uh inside or coming out of an asteroid um so you'll understand once the build starts to properly get going but going to need some hot glue uh because it'll be easier to hot glue everything together I can cover that up later because I do have uh a little trick in the uh in the book that um I've not used before so it'll be a first for me to see if I fail miserably with it or if it works so what I'm going to do now is just start hot gluing all the little bits and pieces to the uh main bigger um uh juice ball I think it's juice or it could be milk probably milk um I don't know I get gifted these by uh my friends and family I think I'm a bit strange well I am a bit strange but you know hey so now the time has come to attach the uh the main um sort of propellent uh engines uh to the back of the spaceship uh looks kind of wild but um yeah uh I know what's going to happen you've probably seen it in the thumbnails already um so yeah it looks odd but uh it it will look better hopefully he says confidently with an arc spaceship comes uh junk and this is a tire that I'm just going to chop in half there you go uh and just stick on the build just to make sure that that uh nothing falls off later [Music] on this is a chunk of xps1 I got this from a interactive and I'm going to use this to uh form my rocks for the uh space build and um yeah so I'm just going to chop this down into chunks and stick it onto the back of the uh the Rockets oh and if you made it this far um consider liking and subscribing to the channel every little helps thank you like And subscribe so the XPS form is now chunks and I've just simply stick all those chunks onto the back of the spaceship and now comes the task of me starting to add little bits and pieces to the uh main body of the spaceship so uh quick Montage the cap that I took off at the start of the build gets reattached to the front because I kind of thought it looked like a uh tank turrent uh I just need something to oh hello yeah I could use this as the front end of the uh the uh tank uh weapon so I just need to chop this down that right there ladies and gentlemen was some Dairy copper field build Next Level magic um so yeah um that's uh now glued into place so uh that goes on top of the spaceship and it has its first weapon the sits that uh were taken off at the start of the uh video now get re uh reattached on well if it would stick uh get reattached onto the side of the spaceship to cover that hole there's gaps in the spaceship which won't make airtight so I'm just going to readdress that and stick bits of styrene uh haphazardly around the spaceship to cover any gaps showing anybody remember these from uh the near the start of the video These are now going to get attached to uh both sides of the spaceship because this is an orc spaceship I uh broke out the steering sticks and decided to add some uh different materials to the build simply because uh it's an orc build and and uh they just basically build uh anything out of um any material you can get the hands on so um yeah steering sticks cut down are fine with me I use some more of the steering sticks just to give this uh little uh side piece well it was blank so it needed filling so I just filled it with this this uh was thinking outside the box to make rivets I've started using styrene and punching the holes in and uh this is the offcuts of that and thought that it looked like some sort of um uh Thruster uh cover or something so I'm just going to stick it onto the build because uh I like how it looks going to add some more styrene uh bits and pieces just along the side of the hull of the spaceship uh which is going to be totally wasted because uh I'll cover that up in a bit not that you can see because the rivets were the same color as the styrene I'm sticking them on to but uh believe you me there is rivets being applied I delve down into my uh junk Bots uh pieces and found these uh these all look like uh some sort of generator or thrusters or something that I'm going to add to this [Music] build these were the inits of the uh water pistols and what I've done was is um I've just chopped down some Q-tips or uh Porky ear things and uh I'm just going to try and make them as straight as possible just by cutting them down there we go um I don't know what it's going to be but uh it it'll look all right once it's painted so uh did both of them and just uh grbl them up with a bit of uh card stock and some uh some cut offs of uh the uh Porky ear things I needed to uh pop off some more uh rivets so this is the uh styrene with the holes in and uh I'm just going to uh you know this is how I do it just uh pop away just keep clicking and uh look little bits of styring come out of the uh the popping machine whatever it's called I'm just going to uh trim down the uh holy bits and then uh not quite holy but you know they they are holes uh so it is a holy bit uh anyway just going to chop them down and stick them onto the build some more stying gets stuck down onto the main body of the spaceship I realized I needed more gelies in my life uh so uh I broke out the GBL from the uh this is a terrible shot I do apologize ladies and gentlemen uh I was uh oh dear God you can't even see my fingers um these are GBL that are going to get stuck onto the spaceship so let's move on and uh cut from this terrible uh terrible point of view well 2 years and I still can't get things into shop uh oh dear me that is terrible anyway all those gelies that you didn't see me cut down uh I'm now applying to the spaceship I thought the front end needed some uh go faster uh sort of wings so uh I just chopped uh some starring up and uh stuck some wings to either side of the ship remember the leftover bit of plastic that I cut off uh the front bit for the tank turret uh I'm going to reapply this onto the back of the spaceship where's not whatnot one thing I oh D me just getting stuck on uh one thing that the Orcs do like is uh lots of engines so uh I just thought I'd uh put another engine on the back of the spaceship and for those of you who like detail um I've just detailed it up some more with uh some more Q-tips and uh bits and pieces and these are the Cannons that are going on the front of the spaceship right now these bits also came from the water pistol and I'm just going to chop them down a little bit to there you go to that size uh and then I can just uh stick them onto the side of the spaceship this spaceship build is totally outside of my uh sandbox sort of build uh it looks insane so I thought I'd put some sort of uh daggers or something on the front end of the ship because you know who knows it could Ram into other spaceships uh so yeah so uh these pointy things are getting stuck to the front of this spaceship no orc build would be complete without a orc Insignia and I'm just putting the skull and jaw into place uh right on the top of this spaceship you can't see it because I cut it out of black styrene and it's being stuck onto black styrene which was yeah a f fantastic idea there Aaron we'll see that in the paint job hopefully and there is she is the orc spaceship almost done there's some more details to be added but um yep it's uh kind of looking like how I wanted it to look um so uh next is um well a new one for me sparkling now Sparling I had to buy Sparling from Amazon because I couldn't understand what it was and it turns out for the UK audience it's just basically grit but smooth grit uh tile grout you know that sort of stuff that we use for um tiling uh kitchens and bathrooms but this stuff is really really smooth and it's really good so I'm going to uh stick a dollop into a cup and then put some water into it to try and make it into a paste now I don't want it too running I want it to still have a little bit of uh consistency in it so um this is going to be trial and error cuz this is the first time ever used this stuff but uh hopefully this will give me texture over the rock bits on the back of the spaceship so because it's a smooth paste I'm just going to use a paintbrush and just dollop it all over the XPS fo just to give it that texture and to try and mold the uh the engines in with the Rocks so once it comes to painting um they don't look at they look like the the the all one uh if that makes sense they look like they're together like it was meant to be uh I'll stop talking now code word time if you want to leave a comment then leave this code word at the start so I know you stopped here while skipping through the video and that's the code word and extra bonus point if you can tell me what movie it's from and don't forget to like And subscribe so there's the spaceship uh rattle can of black and uh all primed up ready to go let me just move the camera a little bit so you can see yeah there you go on it's all its Glory um looks pretty cool the sparkling work to treat so um let's break out the pants there's not a lot of pain in that uh red one so I bought a new one uh this is from apple green it's first time I'm using this uh this uh this brand of um acrylic paint so let's see how it goes on I'm hoping it's going to be the same um but you know so let me just have a little dab here little dab there um going to do it red uh with a bit of green because uh apparently alls like red because they think everything goes faster if the um spaceships or vehicles are red bloody hell look at the time uh we've gone past 20 minutes uh youve probably zap past most of this uh so you've missed that and this and this and that and uh what I'll do I'll just leave you with some uh quick editing shots and lead you on to the Glamour Shots uh so if you're stuck with it thanks very much you're uh you're a true terrain by Aaron fan if you didn't well you're a peeper but I'll keep you if you subscribe and like and until next time keep scratching that build everybody thanks for watching [Music] w [Music] a [Music] w [Music]

Channel: Terrain by Aaron

Views: 1,234

Keywords: scratch building, scratch built, scratch builders, how to and style, Orks, spaceship, warhammer40k, model making, water pistols, kit bash, kit bashing, hot glue, acrylic painting, airbrush technique, jokes, star wars, model spaceship, ork 40k, Vallejo paints, terrain by Aaron, space movies, tabletop gaming, beadbot

Id: OQcLRdkCWnM

Length: 20min 21sec (1221 seconds)

Published: Sun Apr 21 2024