Open Port properly on Mikrotik router

Hello friends To open port on the Mikrotik router you need to do 2 main steps: Open port and hairpin nat Step 1 you create the list of ip addresses Create a list for the ip addresses of the local area network Hairpinning is where a machine on the LAN is able to access another machine on the LAN via the public IP address of the router Create a list containing the public ip address of the Mikrotik router If you use public dynamic ip address enter dynamic dns here Step 2 , open port In this video I open port 3389 to ip address 192.168.1.253 I open this port to remote desktop from anywhere, from the local network as well as outside the internet After the configuration is complete I can remote desktop from outside the internet But if I remote desktop from within the intranet and use the public ip address it gives an error The next steps should fix this Based on the ip address lists created in the previous step, I will mark connection the packets coming from the local area network to the public ip address of the Mikrotik router. I named it Hairpin Nat I then do the NAT configuration with the connection just marked You pay attention to put the hairpin nat on the top position So I have configured Open Port and Hairpin NAT If this helps Don't forget to leave a like and more subscribe to my YouTube channel for more helpful videos Help me 500000 subscribers

Channel: NETVN

Views: 12,351

Keywords: netvn, net vn, mikrotik port forwarding, mikrotik port forwarding ip camera, mikrotik port forwarding public ip, mikrotik open port, mikrotik hairpin nat, mikrotik camera, mikrotik camera port forwarding, how to forward port camera on mikrotik, open port camera on mikrotik, port forward camera on mikrotik, how to port forward nas on mikrotik, mikrotik nas open port, mikrotik nat port forwarding, mikrotik nat port forwarding not working, mikrotik dst nat port forward, how to

Id: rWGVOf-iyDM

Length: 4min 0sec (240 seconds)

Published: Sat Aug 28 2021