What are network topologies? So that's what we re going to discuss in this
video. Now a topology is the layout of how a network
communicates with different devices. And there are a couple of different categories
of topologies There's wired and wireless. So we're first going to talk about the most
common wired topologies. And the most common wired topology that's
used is the star topology. In a star topology, all computers are connected to a central wiring point, such as a hub or a switch. All data on a star network passes
through this central point before continuing to its destination. One of the major benefits of this topology
is that if one computer failed or if there was
a break in the cable the other computers would not be affected
because each computer has their own cable connection. However a disadvantage of the star topology
is that if the central hub or switch fails, then all
the computers on that central point would be affected. This is called a single point of failure. If this happens the entire network
goes down. Another type of topology is called ring. The ring topology is a type of network configuration
where each computer is connected to each other in the shape of a closed loop or ring. So every computer on this ring has exactly two neighbors for communication purposes.
purposes. Each data packet is sent around the ring until
it reaches its final destination. This kind of topology is
rarely used today. The advantage of a ring topology is
that they are easy to install and easy to troubleshoot. However, the disadvantage would be, that if
just one of these computers goes down or if there was
a single break in the cable, then all data flow would
be disrupted. And the next on is the bus topology The bus topology is very old technology and
like the ring topology, it not used today that much. This is the kind of network setup
where each of the computers and network devices, are connected to a single cable or backbone. and this backbone is a coaxial cable. The computers connect to this cable using
special connectors called BNC, which are also known
as T connectors. One of the advantages of the bus topology
is that it is also fairly cheap and easy to implement. However, a disadvantage of the bus topology
is that it requires that the cable is terminated at both
ends using terminators. In order for this setup to remain
operational, there must not be any open connections, including the ends that attach to the computers. So if a computer is removed or if the terminators are loose or missing, then the cable would be open and data would bounce back. This bounce is known as
signal reflection, and if this happens data flow would be disrupted. There is also the mesh topology. In a mesh topology, each computer on the network is connected to every other computer on the network. So by having so many
connections it handles failure very well. In this illustration there are 4 computers with 3 connections on each computer, which makes a total of 12 connections for this network. The advantage of a mesh topology is that it
creates a high redundancy level. Because if one or more connections fail, the computers would still be able to communicate with each other. But because of the amount of cabling and network cards that have to be used, mesh topologies can be expensive, so they are rarely used on local area networks or LANs. They are mainly used on wide area networks, like the internet. In fact, the internet is a good example of a mesh topology. Because the internet is made up of numerous
routers, all over the world that are Connected to each other to route data to their
intended desintation. So even if a few routers go down, the data
will get rerouted using a different path to ultimately reach their destination. So the internet is very redundant because
it s using a mesh topology. So now we re going to talk about wireless
topologies. So let s start with infrastructure wireless
topology. This topology uses a combination of wired
and wireless devices. This is very similar to a star topology,
where you have wired devices, such as these computers here, physically connected to a
switch. And you also have a wireless access point that's also connected by a cable to
same switch. The wireless access point is here so that
wireless devices, such as laptops, tablets, cell phones, etc, can connect wirelessly to
the network. So the wireless access point acts like a bridge
between the wireless network and the wired network. Now the infrastructre topology is not limited
to a single wireless access point..in fact you can have multiple wireless access points
if you want .it just depends on the needs of the network. The next wireless topology is Ad hoc. Ad hoc is a very simple wireless topgology. It s simple because it doesn t rely on any
infrascture, such as cables, routers, servers, or wireless access points. All the devices in an ad hoc network, wirelessly
connect to other devices in a simple peer to peer network. They directly connect to each other without
using a centralized device, such as a wifi router or access point. And because they directly access each other
without a server or router in between, each device is responsible for its own security
and permissions. Ad hocs are useful for setting up a quick
wireless network on the fly, where devices can share data without the need of an existing
wireless network. And the last wireless topology is called a
wireless mesh. Wireless mesh topologies are similiar to wired
mesh topologies, where devices are interconnected with each other, but with the exception that
they are wirelessly interconnected. So for example, let's say you wanted to deploy
multiple wireless access points all throughout a building so that wireless devices that are
in different areas are able to access the internet. So normally you would have a modem that brings
in the internet to the building, and then you would have a switch that's connected to
the modem. And then you would connect each wireless
access point with a cable to the switch. So by doing it this way, this requires extra
cabling and it would also require extra time running the cables through the building. So this is more expensive and more time consuming. Now a wireless mesh topology would be similiar
to this setup, but without the need of these extra cables. In a wireless mesh, each wireless access point
with talk to other wireless access points to create a seamless internet connection for
wireless devices to connect to. So if this laptop over here wanted to access the internet,
it would connect to the nearest wireless access point and then this access point will would
relay the connection to the next access point and then the next one and eventually find
its way back to the modem. So no matter which access point that you re
connected to, you will have internet access because all the access points are in constant
communication with each other and the modem. And even if one or more access points were
to fail, it wouldn t matter, because the other access points will reroute the data. So a wireless mesh topology is very redundant...because
the internet connection is spread out over many wireless access points.
