MikroTik Tutorial 41 - Multiple WiFi Hotspots without Userman

hi guys in this tutorial I'll be showing the altar run multiple Wi-Fi hotspots from a single router so we are going to ed over to wireless and I'm going to create two virtual beep wireless access points so the first one that I'm going to create is one for C accounts and I'm going to call the SS give it Isis idea for cones okay I'm going to create another one I'm going to call this one this one will be for IP suffering so you have IT department you want to create one fi'ty separately on a call this IT coupler okay I know we're going to add these these two interfaces to a bridge go over to the bridge and we're going to create a new bridge for when you create a bridge for each interface so call this bridge IT ok I'm going to call this one bridge accounts okay and then we're going to other ports to the bridge so I'm going to add the port for for IT - the IT bridge by okay and I'm going to add the accounts access points access point to the accountant bridge or I can close this and we are going to go over to the odd spot alright and we are going to create the odd spot using the setup wizard so click on add spot setup and the first add spot that you are going to create is for IT and we're going to the interface that we are going to use this bridge I'm not not the access point itself but a bridge next I'm going to change this IP address I'm going to call it 192.168.20.10 for that's the network that we are going to use and I'm going to leave this pool as is next next add for DNS I'm going to use Google DNS 8.8.8.8 what are the next one 8.8.4.4 next and DNS name I'm going to leave that blank next and it's going to ask you to create a local user admin user let's give this my past work okay so I've created the first hotspot and what I'm going to do is to rename this hot spot the odd spot IT and I'm going to change the address despair MAC address to one I mean only one one connection will be allowed per MAC address click apply ok and I'm going to set up the other access point that arm hotspot for accounts select our cones bridge next and I'm going to give this range 350 next when they leave the DHCP range as is next and ensure that select certificate is no if none next and we're going to use those DNS servers X finish so I've just created two hotspots I'm going to change the name of this one okay all right next thing that we are going to do is wind it over to users and then and this is where you would go about adding new users so I'm going to add a user called if user test I'm going to give it a password and you can set other options on that user account like you can limit the duration and also the speed and and so forth but I'm not going to do that in this tutorial okay okay so we have two accounts one for admin and one for test and two hot spots so I'm now going to do a test and see if I'm able to connect to our Eva see those hot spot so a VM that is running Windows 10 all right let me go okay so now we are see in the hot spots so we have one Falcone's and we're seeing the next one for IT so I'm going to connect to our cones okay and it talks about passwords so why it's asking for a password let's we'll go back to a configuration if we go back to wireless and just open one of one of the virtual access point you will see that the security profile and that it is using is the default profile so what we what you need to do in order to correct this is to we're going to create a next profile and we're going to say dynamic e to none I'm going to call this hotspots cuts plus profile call it awkward profile and then we're going to change each one of these to use the profile satisfy profile and change them to use that profile our letter set over to the virtual machine close this click on a cone click on it connecting all right okay all right so we have been redirected to the hotspot page so I'm going to log in as admin I'm going to type the password click OK I know I'm able to browse all right I'm going to close this I'm going to try the other odd spot let's say no internet but that will change soon because you know windows take a like awhile to to change the status of the connection I you see in where to say no connected so the connection is ok no I'm going to disconnect from the accounts connection I'm going to test IT no I'm going to connect to the ite hotspot alright so that the login page are the same and I'm going to log in as admin so these are cons that were created eylem I'm just put in the password password ok all right so I'm evil two bros so just to clarify a few things for users these user accounts are applied to all the servers by default but if you want to assign the user account to a particular server I could say for the admin account I want the admin account to be able to log into IT only I could do something like this and I could also change the test account and say I want to test account to be able to access the account hotspot only equal configure IDs or I could just leave it to the default where these account can be used to connect to all the at spot server so it's really up to your preference so that is all you go about configuring are running multiple hotspots on a single router so if you liked this video please give me a thumbs up and if you haven't subscribed please remember remember to do so and also share my videos and that's it for this tutorial and thanks for watching

Channel: TKSJa

Views: 42,905

Keywords: Mikrotik, routeros, router os, router, wifi ap, network, network configuration, Mikrotic router configuration step by step, wifi configuration, mikrotik setup, routerboard, Winbox, routing, networking, security, ACL, CISCO network, WISP, QOS, load balancing, Hotspot

Id: QlCC5b7dSlI

Length: 10min 35sec (635 seconds)

Published: Sun Jul 23 2017