Making the Massive Pull Tab

for for for for for for you a oh [Applause] [Music] [Applause] [Music] [Music] than [Music] [Applause] [Music] I [Music] [Music] oh and I'm here too [Music] [Music] is the sound too loud [Music] now [Music] [Music] yeah and I guess what I'm doing this there's a couple things I can also pop in on camera and uh show you some things that maybe didn't make the video I'm here [Music] oh [Music] I [Music] [Music] [Music] [Music] yep one of the patches I forgot to change the uh the one setting so there's like a 30 second delay yeah this pull tab is almost 10 Ines long [Music] oh I didn't even pick up on that oh [Music] I am slipping you got that right it was hot out there hunting today it was really hot I stopped more because it was just hot it's humid the humidity was up is up really say hi yeah once this first um layer gets done then this thing moves a lot faster the first layer is slow to make sure everything lays down nice and flat everything's I see one little booger on there but should be fine [Music] n yeah I think we're supposed to get a little bit of something but I didn't check [Music] again e n [Music] oh [Music] I don't know how well this is going to show up but this is the uh the silky pink one LL pretty cool came out nice yeah I missed getting that out in the mail this week but I will get it out on Tuesday all good Brun Frey appreciate you stopping by yeah right now we're I ran that pole of what to melt next I got a furnace I melt all the scrap metal and uh a giant massive pull tab uh was the WN winning item on the pole so that's what's happening figured I'd throw it on air it's like a 4our print people want to hang out check it out leave that's fine just figured i' throw it out there people want to hang out it's all good and this thing will start picking up speed in just a little bit here once that first layer is down but there's really nothing fast about 3D printing [Laughter] yeah I'm out in my shop which I I have now called the dispatchers Den d yep the pull tab one he [Music] d [Music] [Music] he [Music] the heck are we listening to who picked the song [Music] [Music] [Music] all right that's a little [Music] better it's in a playlist I have but I have no idea why I would have picked that but I guess there's some people out there that might like it [Music] la [Music] hey lucky yeah wingman uh I ran a poll to uh melt some metal and uh the pull tab won the poll so that's what we're [Music] doing I gave you uh moderator status there wingman you can click on other channels and check them out if you like wing man is uh the guy that I go out and hunt with on occasion good dude well for the most part [Music] [Music] all good yeah I didn't expect anyone to stay in here for 4 hours and watch a machine run but we could still chat and have a good time if anyone just boarded oh [Music] [Music] [Music] here's a uh a little Abbott's milk bottle eat your heart out there Frankie boy we got embossing too oh yeah [Music] this one's kind of cool too I just found this at the other property it's not in the video yet but uh pretty sure that is a cork top says uh what does that say I think it was 2 and 1/2 o I like the small ones bottles come on people I like the small bottles all right printer's moving now I caught it I caught it now I guess the question is should I make the beaver tail as [Music] well yeah full half uh I got the Petra bond for sand casting uh this is one half of the mold I'm going to make two halves put them together that'll just make it easier to separate take out without uh ruining the letters that I have going in there simplify it a little bit so just like the coin that I messed up uh you know I made that 3D printed but I actually accidentally mirrored it but but uh still cool yeah I can actually use it for I I meant to bring it out to the beach with me and uh every time I I dug a plug I was going to plunge it into the beach sand and leave my mark there yeah this is a uh oh let me get it straight here I did this hope that can get in I got to watch a 3D printer there's a 10 lbs of copper and I was going to cut it open mill out the inside and make a uh like a just kind of like a box out of it but that's actually this 10 lbs right here I got to watch a 3D printer camera's a little close oh I'm not even in camera I'm on the wrong side so I just had some markings there and uh actually came out with a pretty cool looking little geode in there so to speak pretty cool but uh yeah yeah I I love modeling on uh Fusion 360 uh I got vcarve Pro uh a 3D printer farm and then I make I make these guys or uh one lb copper ingots um I was selling them yeah the 3D 3D printing is actually if everything set up right it's pretty much drag drop file start go um but when you have a problem things can get complicated [Music] but y all chat amongst yourselves real quick I got to run into the house and grab me some coffee I just made a pot oh [Music] [Music] [Music] all right yo PA what's up now we uh I ran a poll on uh what to melt uh all the scrap metal into next and the uh massive pull tab won so that's what we're doing [Music] all I got to do now is hopefully this thing doesn't glitch out on me I just got back over here I went in the house to get some coffee actually have my coffee pot in here but I don't have water and stuff set up in here yet yep um this I'm basically 3D printing uh the pattern uh then I'm going to take take this out sandcast it uh that's going to leave the impression in the sandcast and then I'm going to melt aluminum to make the pull tab I didn't even think about the the fan on this thing has to has to be blowing I it's probably making some noise but I can't hear it cuz uh you'll get the feedback oh [Music] yeah thanks for all hanging out um I know there's nothing much going on but you know little place to hang out appreciate yall and I had a friend of mine that wanted me to make this I made this on the 3D printer also I know doesn't look too like anything until you put a light behind it and you can kind of you can see the dog on the couch hold on there's I got I didn't turn the delay off on this thing so let me get the the face of the dog in there [Music] then I did this one on my uh CNC so when you put Happy People anniversary came out pretty cool [Music] Amy you don't have a wrench hang on a second you can't have you wrench and I don't know if you guys want the music a little bit higher to drown out the f a little bit or you want me to just shut up and just let the fan noise play out I don't know cuz I can I can really hear the fan all right cool yeah I never tried to do this before so wasn't sure how it all going to play out perfect thank you guys I guess I could show you guys a couple of the finds that I just found didn't make the video yet oh Amy um I sandcast aluminum so I take all my aluminum scrap um I make a pattern like of this pull tab I melt the aluminum and then I make an object like my uh logo even though this is backwards um so I ran a pole what what did everyone want me to make and the the pole tab one so just throwing a process out and probably do some sort of a giveaway for it as a a winner and if everything goes well maybe I'll I'll you know make a couple of them to to hand out for a giveaway I think it'd be pretty cool and um I also have to well I was going to do something for another subscriber count but since that doesn't seem like that's going to happen I was going to um do a a pinpointer giveaway made out of copper yeah I I was uh I wasn't sure in at that time when I did that I still didn't know too much about anything but I guess most people do like their first 100 then a 500 but I'll be dead before I hit 500 so I might just have to do it at maybe like 300 I'm only 14 away from that so I might I might see that before I die in put okay hello yeah and I you know I've made these as well they're little keychain uh coils and all the different colors so uh if you want one you know you can go to my B page get my email address and uh I'll send you one out should anybody else find anything this today anyone hunt today anyone go out and find anything cool I found me some silver while juice was live streaming yeah I mean I did quit a little earlier than I would have liked to but I would the humidity was up high and I sweat was Dripping into my eyes and it was just getting annoying n you can definitely you know you can definitely hold this on your keychain no the the little coils did you see the coil full half the detector coil keychain did you see that now this is about 10 Ines let me see oh my never mind it's almost 12 in all right let me go let me grab it right here full head these guys will go in your keychain little detecting coils make them blue black red pretty much any color you like I have [Music] I have uh let me show you I'm not sure how well this is going to show up but I have this green I don't know if that's focused it's a pretty bright green so that might be close and then I actually have what's this one called oh this was a [Music] uh this is a uh silky green kind of shiny I like shin [Music] [Music] [Music] the first one lucky or the second one I got I there's like a unfortunately I forgot to set the uh the delay so I think I'm running about a 30se second delay maybe 20 seconds [Music] yeah I I have plenty of them made in Black already yeah the first one you got it I'll make a batch of them yep sounds [Music] good well you were supposed to email me back already full half I sent you an email but you didn't respond I said yo [Laughter] cuz you asked me to email you and I said yo yeah it could have went in the spam folder yeah it's definitely something that um the kind of forget that's there once in a while until you start making it a point to look there consistently and I guess if by chance I wasn't planning on doing any type of a giveaway on this is probably even a bad idea but I guess if we get 15 people watching I'll send out a patch I'll make some sort of game up in first person that guesses something can can get a a leather patch oh that's awesome lucky [Music] sup yode he's making that massive pull tab baby [Music] just a little hangout and chill [Music] [Music] session all good full half appreciate you stopping in and uh yeah when you come back yo PA got you wrenched up buddy yeah when you come back just click right at the end and you'll you'll see that part of it done yeah it's uh 12 it's uh 12 in Long something I can't give her [Music] yeah so uh made a uh a poll figure out I'll melt my scrap metal and make something and uh the pull tab won no way juice has got the littlest bang in the world you can you can let him know I I said too oh wait wait till today's video comes out oh I got him like five times [Music] [Music] yeah that man had to pay for a whole [Music] bunch he made my [Laughter] intro he was literally my [Music] intro imagine finding an upside down pineapple and then a little finger condom right next to it yeah the only thing that was missing was a saint sweatshirt [Laughter] [Music] we are just hanging out chilling I'm sweating I'm in my shop right now [Music] that's right that's right I mean I'm not as I'm not going to say silvered tongue um let's see juice is pretty quick with some you know basic lingo but I got a black belt and Verbal Judo so I'm just maybe not as quick to let it flow out as he is but I'm also what 10 years older than him so I'm a little slow I'm a little bit slower I I you know we're we're on two different levels hey where' the music go who's in charge of the music oh let's see what do we want to play play some rock [Music] kind of rock [Music] [Music] yeah so every time I look at this this upside down pineapple yeah I'll think of juice [Music] [Music] and it's you know it's really funny I I think it was only maybe 3 years ago that I knew what the upside upside down pineapple actually meant I thought I I just didn't know [Music] [Music] yeah this is going to be one honk and uh P [Music] tab it looked so much smaller when I was modeling [Laughter] [Music] it uh yeah I'll go with that look you're [Music] [Music] right oh man I'm glad we're supposed to cool down this week I got a lot of work but I my hunting spot that's really good right now is pretty close so I can pop in over there get some more hunts in um how thick will this be [Music] um I think it's about it's going to end up being about an inch thick roughly yeah 30 36 mm that's I think that's about an [Music] [Music] inch and I down in this area here it's going to it's going to have uh dispatch detecting in it pretty [Music] [Music] small yeah so should be should be pretty should be a pretty easy um item to make uh it's nice and it's big enough for the sprew let the uh aluminum flow and uh close up all the voids should should work out really well all right Amanda thank you [Music] yeah so I'll uh once this is all done just like the coin I'll I'll uh record the process probably shorten it up a little bit more than the than the uh coin logo that I made that Mason Merc One um and uh yeah it should be a should be a pretty good video I'm not sure if I want to put it out on a a Friday or an off day I might make it an I dig Friday's video but I'm not sure [Music] [Music] yet but I probably should cuz probably most likely someone from the ID dig Fridays crew whether you detect or just support everyone you're watching so might be the best time to show it and then I'll do a I'll do a live uh giveaway for it so should be should be really [Music] fun uh this half of the pull tab is 4 hours and then the other half should be much quicker I'm not going to live the other half but it's just it's easier to um uh accomplish because it has some a little bit more realism realism to it so it was e to easier to 3D print this in two separate parts to sand cast them you'll if you know what sand casting is you'll understand why um if not you'll see why in the video it'll just it'll make it easier and it'll be uh a lot cleaner when it's all done [Music] I guess the only thing I got to make sure is that I have uh enough [Music] material yeah it should have enough on the spool to keep printing this and probably the other half [Music] waa not that allong you know let's do [Music] some no got to change some music oh well yeah good then you then um you know the 3D printed part is just a pattern so I'm not doing a lost wax method so to if I was doing a lost wax method then I would make the whole thing melt it out and then then pour in the aluminum but to be able to put half in the in the the sandcast mold and then flip it over put that other piece on top just line it up right and uh yeah it'll work out great and if it's off slightly I just I'll just sand the seam down I got to sand the seam down a little bit anyway so should be fun yeah this going to be one honking uh one honk and pull tab it might be the largest pull tab ever made I don't [Laughter] know wouldn't that be funny if it was I guess I I could have turned this slightly more I could I could have got another inch out of them if I wanted to but right now everything everything's looking really good nothing's uh pulling up in the corners and everything's laying down flat so should be should be pretty smooth yo BC in the house what's going on we making a massive pull tab for a giveaway bro a come on Jason you will find a pull tab I guarantee it I'm sure you broke plenty off for us to Find Yo silver assassin breaking in the back door what's up buddy just making that massive pull tab bro it it it's on your short list of the bucket list on that list yeah uh it's going to be a good one I'll try to do some kind of fun giveaway for it and if if it goes as smooth as I think it will maybe I'll make a couple of them down a Nokia phone my gosh I I actually think I still have uh my first couple Nokia phones that are like the size of a brick that's too funny yeah they had great times when they first came out service was [Music] ridiculous I could live without my phone though 100% got a LoveHate relationship with my phone it's always annoying me I I don't everything I do on YouTube is all on the computer like today was the first well maybe the second time when juice went live I was uh metal detecting and I I went on my phone to to watch and clipped it on my clip backwards so I could hear it and uh yeah but chat just to see it and chat now I'd rather be at my computer I don't know how you you guys can like I don't know I just I don't like it much rather be on the computer yeah Brian I can't remember the dang name of it but he found a nice uh chunk of silver I know it's a a Jewish thing that I've seen on um you know the people's doorways I forget what the meaning was behind it but uh I usually have it on the door [Music] jam uh I don't I don't do Facebook but anyone else welcome yeah that's it I know you would know that thing yeah if I go to one part of town to do work you know everyone has them on their doors I think it's something to do with like you know you're getting black walking through the door something like that all right Amy thanks for stopping by appreciate [Music] it yeah this this part will get done tonight and then I guess sometime over the weekend I'll finish the second half and then get everything set up and pump out the video for the poor hey Yodi do you you record everything on your phone too or do you use a camera or both [Music] oh wouldn't that be funny if somebody were to oh that would be great I should I should do that like if I if I see a bunch of people detecting out there and if it looks like they're going to go that way just kind of like bury it in front of them oh yeah all right so we beat it we beat it by all 6 Ines outstanding yeah I've I've recorded a couple shorts on my phone but I transfer them over to my computer to [Music] post yeah I just I use my GoPro I still have the GoPro 5 I think it puts out I think it still puts out a decent quality vid um but I am I am ready to pull the trigger on a DJI though only because I I'd really like to have that horizontal lock cuz I tend to like look around sometimes and it's I know it's really quick so I think the DJI stability will be helpful when you're out there you know twitching looking around hearing what's going on around [Music] you yeah well tomorrow I'm smoking I got two chicken two whole chickens I'm going to inject them with butter I'm going to do one garlic and I'm not sure what I'm going to do with the other one just yet but I'm going to come up with something I'm going to smoke them oh man I am ready for that yeah I forget where I got this injectable butter from but apparently it's anyone that smokes and injects would know what that butter is but when I made the smoked the turkey and I injected the turkey uh that did the garlic and butter on that one oh my God that was the best turkey I ever had oh hell yeah it' probably be a more interesting um live stream to watch than this [Laughter] is all right right now we're uh we're getting some of the infill done do the hollow part and then pretty soon it'll start doing the uh the letters Pro probably really soon you you'd start seeing the letters yeah I I only had a like a a bacon and egg bagel this morning and that's it I haven't eaten again I love cooking I just the time is always the issue cooking is like a dedication I made uh baby back ribs the other night they came out freaking [Music] amazing go printer go get her done baby get her done [Music] [Music] yeah oh yeah yep it's going to start doing letters now I think pretty close oh I think it's still on infill now it's doing the letters hopefully it turns out the way I wanted it to we shall see you soon I've got nice little radius on them for the mold and that should come out really nice uh it's been printing for uh an hour and a half there's a there's an hour just basically under just under two hours left to go I probably won't live stream all of it um not unless you guys want to leave it up so you can chat along or um but um yeah it's a four it's a 4our 4our print so I think I started live streaming I was maybe uh maybe 5 minutes into it just to make sure that it was uh everything was laying down the way it's supposed to so and this is only half of it so the other half has less detail so that'll be a lot [Music] quicker so this basically the where it's printing at now is like the lowest point of the uh of this print where it's going to have dispatch detecting on it I know can't a little hard to see my flashlight uh yeah it started doing the bass the bass lettering anyway so yeah FR coming out long coming out just [Music] perfect all right need another [Music] [Music] song yeah I I really wish I [Music] um I seted the the delay on this stream cuz cuz I don't need to have any but I'm using I'm using an older phone for the stream so this way if I need my other phone I have it [Music] [Music] [Music] it's going to be fun this will be a wall hanger for [Music] sure Brenda kicking in the back door what's going on we printing that that massive pull tab and we're going to go off of Lucky diggers stats and say I'm currently making the biggest pull tab in the world [Music] yo con is in the [Music] house we down making the the biggest pull tab in the world [Music] actually you know what I was going to do I was going to get one of them like uh those push gr grass seeders and modify it to shoot pennies and pretend I'm in K weirdo like filling up the parks that would be really funny [Music] the the you know the the penny seater oh man you guys are awesome I didn't think you guys would want to hang out thank you so much [Music] so uh I was surprised I got a couple of votes for you know I put down what was it leave the scrap metal alone you bully actually got a couple of votes for that that was pretty funny [Music] all right let's go printer I've had this printer for wow quite a long time it's it's been my basically my Workhorse R&D printer and this thing has just been rocking I mean I've done a lot of upgrades like this whole fan Contraption here I 3D printed that whole thing um you know put some high-tech wheels and belts on this thing but for for a cheap little 3D printer all my good ones are on another bench but uh this thing this thing's just printed out thousands of items ah there you go Yodi well it it would have to be the largest sandcast sand casted pull tab I don't know did we start classifying [Laughter] now hey don't make me bust this mold down in the quarters and you know go bigger I'll make a 36 in Long one y sweet digs in the house yep the pull tab w and I'm already on [Music] it um I do have a recommendation for a 3D printer for someone that's just getting started and also once you get started it's really quick but if you really wanted to have a good solid 3D printer that's like in the $300 range you want to go with the artillery um you can find it on Amazon outstanding printer um and it'll do your flexible material so if you want to make your design and make your own cell phone cover um it'll it'll do that um just just an outstanding printer this one you can't even buy anymore well you can but not this exact one oh it this is it's two I had this since 2015 so this is almost 10 years old already that's right cuz this color came out in 2015 when I got it [Music] [Music] I got [Music] [Laughter] coasters you can too all you have to do is go on the sweet digs Discord and get in there for a giveaway you can get it [Music] [Music] [Music] so did you get out to uh hunt today sweet digs [Music] I don't think I saw you in juices live but I uh I found some silver today so I was happy [Music] thank you thank you yeah it was it was uh it's a cool it's it's small but it's it's it's a really cool find oh no I'm not talking about juice [Laughter] [Music] I I I can't I can't spoil [Music] it oh no I was having a great time I I was finding all kind of stuff but I just uh the humidity was just cranking and I couldn't stand sitting in my own sweat any longer we went from uh a nice Cool Spring to hot and humid too fast [Music] yeah it definitely goes like that Yodi I've been there there was I want to say there was a time I think it was three outings in a row and the best thing I could actually find was a penny just my luck [Music] yeah it's rough man when you're you're not used to hitting that uh that humidity and then when it just fires up on you it's just like whoa I mean once it's a little bit later in the summer yeah used to it but man in the beginning always sucks [Music] all that's cool Yodi yeah I got to catch up on some of your videos [Music] man it's been uh work work is super busy and you know trying to get that done and worked late a couple nights had a couple customers one some extra stuff done so it's been a little bit rough to try to edit do everything and then watch some [Music] videos yeah you can keep the Florida hot we get we normally get Maybe two weeks where it's like high 90s and some humidity but but we do get the humidity quite a bit we get that Gulf Stream coming up from Florida so we will get the humidity but our temperatures don't normally get into the high 90s for very long now Brenda you you you hold on to that you put a sky hook up on that onto that weather and you hold it down [Music] actually I think the worst hum humidity I had felt was when I was in Louisiana like even after you took a shower you dried off you weren't dry you you could not stay dry that that was rough but I did start getting used to it about the 6 month Mark um but that that was when I was in the Army and then um a year later we uh the whole division moved to Texas so that was completely opposite it was just dry but the sun just felt 10 times [Music] [Music] stronger yeah the humidity is a whole another animal it sucks to living life out of you [Music] oh yeah you're not far from [Music] Louis let's change the song the world with and my before IET [Music] [Music] yeah I mean 100 without the heat without the humidity it's hot but if you get into the shade it's not unbearable [Music] awesome we'll get over there and check it out if you haven't fck Duck's got a giveaway check her community post congrats on your [Music] 200 yeah I need uh 14 more for 300 [Music] just it's a slow ride I try not to I don't really I mean it's a fun stat to track but you know you you have your your base community and you know the people that support each other week in and week out that's that's where the focus is um you know that's definitely where the focus is you know it's all all all the people week in week out and uh you know I've been putting out some more shorts but uh you know they're there are people that'll subscribe but they'll never you know they're not technically a supporter because they're they're not going to come back and uh uh it's not like I'm I have zero plans to make this a business model so I'm not that's not on my list and there's no way I can make this any better faster it's just not going to happen [Music] yep that's right Brenda I love I you know it's definitely something to look forward to I dig Fridays it is an absolute blast [Music] yeah it's I that's just a headache to sit there and you know make try to make YouTube a business model I mean if if that's your gig that's your gig but it's not mine I I'm not I I can't put that kind of time into it I mean I have fun editing I might do some I wouldn't even want to tell I mean I've done some of my intros I mean it literally like 6 hours hours just to edit some funky stuff and not that I'm I'm not great at it um I'm I'm slow at it I don't know how to do it fast but um but it's fun for me but if I had to feel like I had to do that as a business model it wouldn't be fun anymore it would be work and I don't want I don't want this to be work I want this to be fun like I enjoy coming up with a new idea like when I used the The Legend I turned it on and zoomed in um to show you how I found the silver military Ware badge lapel I mean that was fun it took a long time but that was [Music] fun yo 513 sorry I was I was over here talking I wasn't looking at [Music] chat yeah man we're we're we're making the uh the biggest pull tab in the world baby and we're going to sandcast this thing and mold it out of [Music] aluminum and I can't believe we even have 14 people in the house man you guys are awesome never mind 13 you guys suck I'm kidding I'm kidding [Laughter] relax it's still I I mean I know we're just putting out a a pull tab but I mean I really do appreciate you guys hanging out I mean it's you know I'm having fun you know I'm not just sitting in here by myself watching this thing um you know you guys are hanging out we're having a good time shoot the about whatever you guys want uh but was just I was watching the I was watching the count and went went soon as I said 14 it dropped the 13 I appreciate you L yeah and I when it's so funny when I found that that pie tin after I dug it up I'm like oh yeah this is an LL shout out shout out oh [Music] oh [Music] man oh that was funny yeah and I don't I don't think anyone else is streaming at this time anyway I mean I'm I don't want to step on anybody's anybody's toes and either way it's like you're not going to watch me anyway but I just figured I'd do it it do it you know have a good time and like I said if we we're I was about to say we're almost hit that 15 15 watching Mark I wasn't planning on doing a giveaway but if we did I was going to give one of these patches away so but I'm not trying to do that as a lore by no means just more of an appreciation [Music] I appreciate that yeah and like I said it's not like you know if if hey Brian if you were if you were live streaming I wouldn't expect to to hold anyone to you so I mean people are going to go where they want to go where they're comfortable having a good time I get it I mean sometimes there's four five six people in my my subscription list that are live streaming I may have two of them running but I I I'm more more of a personal type so like if I'm watching your stream like I want to watch your stream you know I want to interact I want to hear every word you say that's how I am [Music] but I you know I get I guess my statement about stepping on anyone other's toes is more of a um a guilt thing as far as like I don't want someone thinking that you know I'm going live because you're live type of thing but that's just me having that little you know a little guilt trip about it but that's that's basically what I'm talking about but that by no means is not who I am all right I I'll shut up about that now let the hor first die yeah let me get the flashlight I I actually didn't even proofread it and I'm notorious for fat finger in a key imagine if it doesn't say what I want it oh man oh yeah that's looking good let me see can I backlight it H kind of I got to watch I don't hit this thing oh yeah uh I can see I'm going to have to do a little Cleanup in there but yeah that's going to come out pretty good oh jeez LL I I could see that I mean on a hot day the women that have that thick hair and long yeah that's that's like putting a uh Woolly Mammoth hair on you in the middle of the summer um I'm guessing that this is going to in total this is going to be about uh an inch thick when finished um I think it was like 36 mm thick let me double check I I can't well maybe I can no I can't um I don't I don't want to move my program because I have to um flip this to do the other half and I don't want to lose my place so but it'll be about an inch thick somewhere in there it'll be a monster we're uh 12 in long and roughly 6 in wide let's [Music] go I mean you you can't say massive if it's not going to be massive let me let me get a let me get a actual pull tab and put it in that void spot for just for let me go get in shut up the word I was looking for was comparison but I'll put this in the middle here oh now it's out of camera but guess I could have put it on the side of it let's do that boom yeah we up the scale a little bit oh my gosh my stream is so far behind yeah I'm not exactly sure what the uh the ratio is but I I I'll probably get that worked out for the video let you know how many times bigger it actually is just a little bit of math but you got the pull tab next to it for comparison and uh yeah yeah this thing this thing's going to be this thing's going to be awesome definitely have to break out the the big Crucible when I go to melt the aluminum hold on here here's the actual modeled one that has the hole in the middle yeah I'll tell you what I mean i' I've spent a lot of time with 3D printers and for whatever reason it it doesn't necessarily get old and I had a pretty good 3D printing business um I shipped all around the world um and yeah for whatever reason it it's kind of doesn't really get old I mean it'ss boring it's not as bad as watching grass grow or paint dry but and you you get to see progress even if it's a little bit slow um I've made a uh a 10 pound copper bar I might as well show it again since I think I showed that way in the beginning all right for reference this is a one pound one lb copper gives you a nice cool design on the top that was one lb this I was going to turn into a project but this is 10 lb this thing's huge but I actually like cut the uh the top off of it which kind of shows a little kind of like a Geo type of thing inside there and then you know the lid I was going to make like a a closing box out of it I can't get any further or closer because I can't hit that 3D printer but never did finish that there's a lot of [Music] work so yeah as far and um uh there was something else that I casted I I did for a customer um I think it was uh 14 by 14 by9 it was a a sign [Music] [Music] [Music] and remember when [Applause] uh remember when these started hitting the market during you know what and everyone was using these at the uh ATM machines and uh pull the doors open well guess who was putting them out all designed by myself [Music] [Music] [Music] oh you like this music it's kind of a has like an Arabic Arabic Arab an Arabian twist yeah right I I if I if I really was paying attention I would have got my snake flute and uh you know start having them dance for you guys [Music] well I'm I'm glad it was entertaining at [Music] least all righty appreciate you hanging [Music] out what time is it it's 6:30 for me yeah I have to catch up to Mason's later yeah you know what I'm not going to lie it's not something that I say very often so I I I'll come up with some but you know certain things I I guess you think well I don't want to say it the wrong way so then you confuse it with something else and then you twist it all up anyway so it is what it is [Music] but I'll be right back in 3 minutes I need to uh up my uh my liquid intake I'll be right back [Music] e [Music] [Music] [Music] for [Music] [Music] all right we got some coffee [Music] awesomeness yeah that that definitely was a cool find Brian [Music] [Music] you got plans for that thing or are you going to uh sell it you want me to melt it you're going to put it on your door uh you just going to give it to me or what do you want to do yeah I was I've been slow too I got I got to get out um I got a couple to get out myself and uh work work on me this week had a couple of uh issues to get done I'm redoing the whole entire house kitchen bathroom every room doors trim so uh been uh and then some stuff was getting delivered when it shouldn't have been so been a little rough so getting to the post office wasn't [Music] happening oh yeah it's it's coming out coming out really good I'm happy with it well I mean if the larges run a little big than the regular large you know that's fine too but uh yeah I mostly I I wear XL I don't like I don't really don't like a tight fitting shirt some some xl's are definitely a little bit too big and then especially on a long sleeve a regular large won't won't get to my wrist so I got long monkey arms [Music] oh this music come on what is going on here that's a little better yes you're you're right you always got to allow for some shrinkage and uh I mean more so when it's cold out but you know you never you know if you get the the hot or the cold you know you're getting into the dryer you know you you got to watch out for the shrinkage it doesn't make everyone [Music] happy uh no no no big guns here LL [Music] NOP I got it I got the endurance but I don't have the show me guns nope I got the long distance covered though [Music] I mean I guess if I try really hard I can get a gun to pop up a little bit [Music] [Laughter] [Music] yeah I mean it might be but I I wasn't being [Music] specific yeah you it's up to you how you want to read into that [Music] [Music] [Music] man I'm going to sit [Music] down been on the ghost in [Music] seven yeah this part here is starting to close up already well the whole thing's going to close up but I not sure if this part over here is uh is going to close up first before [Music] that yeah so then once once this is all done I'll do uh I'll do some sanding if it needs sanding and then I'll um well because this is quite big um I'll normally use super glue let that dry and then sand it so it has a smooth finish to it um but this one I'll probably just do a few coats of polyurethane sand it do a couple more coats and then sand it this way it's all nice and smooth and um it'll also assist it in uh as a mold release as well so it's it'll be nice and smooth and it won't try to grab the sand from the [Music] casting yeah thanks Brian appreciate it buddy Yep this is going to be a massive pull tab it's actually quite bigger than I had envisioned originally before I started [Music] well that could be what she said as [Laughter] well oh my gosh [Music] yeah I can't I can't wait till we're uh pouring this thing actually this coming week's going to the weather's going to get a little nicer as well so that'll make it even better cuz if you've never pulled out a crucible from a furnace that's heat you just never thought you could prepare for I mean it is hot even your 3 four feet away from it it's like a little baby Sun by your feet it is hot like unbelievably hot aluminum is a little bit better cuz the melting point is is not as high as like when I melt copper I have to get I'm basically in I think it copper melts at 1930 1,930 de and I'm normally you know 2300 to get it to melt so it's when it pours it's nice and smooth so yeah it's man I never never felt heat like that it's really nice and when it's cold out [Music] I can I uh I have a CNC uh router as well so I've I've done my own custom molds that I I poured into um I can't I won't make it as clean as let's say a coin you know the the one side was definitely going to have a pour look but yeah I could definitely do a custom pour um basically I guess my well if you've seen the coin that Mason Merk got as my giveaway I could definitely do something like that cuz this is the um the 3D printed template that I used to you know to create the aluminum so you know as long as you're logo isn't super or anyone's logo isn't super intricate so to speak um and that the font isn't such that um you want it to be smooth and and the edges rounded over so when you lift it up out of the the sand that it's not grabbing it when it's rounded it kind of lets go of it easier so there's some things to keep in mind and you know ways around it but uh yeah when you have have a little bit of flexibility in that like to do Mason Merks no way so there's you know too much detail now that's something that you rather have stamped rather than poured and I just saw your no I haven't done gold I might I might I might do something in silver M you know what I should do I should do my logo one in [Music] silver H that' be pretty cool yeah cuz I have I have definitely enough silver to to make to make my same logo template um yeah I collected silver for a while so I was in the K the kilo bars which is I think 34 o a bar so something about holding that just feels good and right now Silver's up so I did plan to sell them when they I bought when there was only $14 an ounz and now it's $ 30 something an ounce or 30 now but I always said if it goes up you know stays in the 30s I would sell sell my big bars cuz there's going to be a point when the big bars aren't worth anything [Music] yeah the one thing with um you know pouring gold the melting of gold the pouring of gold it's you know you got to keep the flame on it and try to keep the oxygen away from it with pouring anything that's like if I had if I had to I have my welder with argon I would spray argon on it as it was pouring this way would uh keep the oxygen out of it as you're pouring uh and that'll really assist in being a really clean pour um but if you're not pouring into a fully all-sided mold um you know you got seam lines so there could be some cleanup to do so something like gold I don't have the best equipment to do it to where there isn't going to be some gold old loss as far as having to polish it and sand it to make it look super clean [Music] looking yeah it's hard to say what's going to happen with the uh the prices I've been watching but yeah the big the big stuff isn't uh in the the hits the fan type of moment the big stuff isn't going to be as valuable it's not at a trading level [Music] so wait waiting for the the the right the right timing well you never know when the right timing is going to be but you know there's there's that that feeling you get when you need to offload it I hope juice gives us a good good [Music] braiding I I sent him a whole bag of pull tabs from here and some pennies all the crusted Pennies from the beach I sent that to him cuz he doesn't get he doesn't get salt water over there [Music] [Music] yeah one of one of my first um few videos um I I put my silver bars out on the ground a few of them I think a a kilo a 10 o and an ounce and seeing how the detectors reacted I was really surprised the the detectors would smash to 1 oz but would it would overload on the 10 o and overload on the kilo bar um and you really wouldn't hear it um it would you would start to get you know when you went away from it you would get it but it would it would literally overload so you could literally be going across a silver bar and you wouldn't really think much of it it was kind of kind of [Music] funny yeah he he definitely got a got a kick out of that [Music] you know he needed some he needed some some East Coast pennies and and Bull tabs I'm sure he threw him right in the [Laughter] [Music] trash yeah I I see a spot now that's I guess the uh webbing in there is called the uh infill and I can see right here the infill was a little weak so the it's got a little little bit of Rippling in there which I'll have to uh clean that up [Music] [Music] yeah this this thing's like almost almost closed up down here that'll be a good feeling that help the print go a little little faster [Music] yeah you know what else makes the um the 3D printer look a little more hypnotic is on a larger part when it's small and it's and it you don't have that fluid motion going around you know you it's not as well appreciated if you would say but when it gets to loop around and big big movements yeah it's pretty [Music] cool I'm B I'm and for me right now I'm more like just making sure that there's nothing uh you know all the wheels the pulley the belts everything's running straight and true I mean I do have a an opportunity to make a slight adjustment if it need be but on this printer here if I lose power or something goes this whole print's trash so I've been 18 hours into a print that took 20 and completely lost all of it downside of 3D [Music] printers so a lot of the newer ones have a uh power out feature resume resume print feature this one does not oh it does suck sweet dig sucks a [Laughter] lot H I've had filament run out on me um I haven't had a power outage but I've had something go wrong um and a lot of times you just don't know it just happens I can't I can't show you cuz of the how close the camera is right now and if I touch it I don't think I'll get it back to where it was but I I printed this big V ladies for guys it's just a vase um but it's really cool um I might nah I'll see but I don't think I'll be able to get it [Music] all right the vase or vice 15 in tall let me [Music] see I might be able to [Music] sneak that's just the bottom of it yeah I can't I can't get it in there and then that's that's the top it's got a cool design in there but it's 15 in tall oh I just hit the camera [Music] yeah can't I can't get it in [Music] there I have to take a St shot of it [Music] [Music] all right weet dig St take care appreciate you hanging out for a [Music] bit thanks lucky oh you can't hear me well thanks lucky [Music] I know I can't wait to smoke those chickens tomorrow oh man I'm going to eat [Music] good I'm going to use almond almond wood [Music] oh I got to figure out what I'm going to do with the other one garlic butter and I don't know I don't know if I'm going to do like a Pepper or I don't know LL garlic and butter and what should I smoke the other the whole entire chicken one garlic and butter and what what would go good on the other [Music] one I'm not sure [Music] I don't know if I want to do a regular salt lemon pepper there oh yeah okay we got [Music] that I wasn't thinking about lemon pepper oh yeah and them two will flow together really well too garlic butter lemon pepper oh yeah oh my neighbors are going to be jelly they're going to have to they're going to have to smell that for a while I every every time I smoke something I I hear about [Music] see if I can get some lighting over here I don't think it helps I can't see right away until I don't think that helps I don't know it's too bright Maybe [Music] uh I'll I'll take I'll take I'll make I'll make a little bit of uh maybe a short or maybe maybe I'll do just a a quick video vid get that oh when this when when the Smoke's coming out I I'll I'll do a slowmo oh yeah do a little slow-mo on the smoke that'll be [Music] badass hm man this stream is so far behind [Music] yeah I gave up on the light it's too too bright and it's only on and [Music] off oh are we on the top [Music] now I sure hope I have uh enough [Music] infill oh man I'm hungry now oh I want that garlic butter running down my my my neck oh that's going to be amazing damn [Music] settings on my other phone I have it set but I didn't do it on this one I forgot yeah I'll try to get that I'll try to get that slowmo of the smoke coming up and then kind of like zoom out with a little time warp and then Zoom back into the to the chicken just bubbling in slowmo the skin just bubbling oh man oh that that'll be me LL for sure I'll just be grabbing the leg off that thing and just slapping it against my lips oh [Music] man that'll be fantastic oh yeah [Music] [Music] all [Music] right heck yeah got to get this smoke in slow-mo [Music] oh yeah y this part's almost almost done the uh I say [Music] this appears to still have about an hour left and then the this half will be [Music] done actually I I may have actually been I don't know when I started this and then started streaming this thing may have been running for a little bit before I started streaming I have to recheck I don't know what's your guys favorite part of the chicken you guys like the the white meat or the dark meat I'm pretty much on the dark meat side unless unless the white meat is like extremely juicy but smoking oh yeah the white meat's going to be juicy too but I do like I do on the chicken I do like the dark meat but what's your [Music] favorite oh I got to start thinking about sides h I love me some faked beans some homemade [Music] coasta oh yeah yeah we're going to do that homemade Coast law and big beans [Applause] yeah the dark meat definitely that's the flavors right [Music] there H and they they won't take long I I would probably say 3 hours maybe maybe Four [Music] Tops and smoking with almondwood it's it's not that strong so initially I I'll I'll put on a little bit more extra smoke but yeah it shouldn't take that long that's going to be rough that worst part about smoking is watching it waiting for it I should say cuz if you're watching it you ain't [Music] smoking what do you mean you haven't tried dark potato Sal that's the best [Music] [Music] [Music] uh and after that it's time to break out the venison burgers baby oh yeah 20 2080 [Music] [Music] oh dear is right I have to admit though the best is pressure cooker oh man pressure cooker is the bomb well I know deer nuts are cheaper they're usually under a [Laughter] buck oh heck no I I'll Chomp down on some Bambi Burgers guaranteed well not Bambi but you know what I'm saying hey where did the music go who's in charge of the music let's see let's do a little bit of oh [Music] yeah b l knows what's up [Music] [Music] oh yeah we're on here talking about food 513 and ah it's getting rough we got smoked chicken dark potato [Laughter] salad back straps venison burgers deer sausage [Music] oh man I can't wait for tomorrow now and beer nuts as appetizer that's right forgot about the beer nuts a there you go homemade enchiladas baby yep got to leave the T sh out son for a while [Music] [Applause] [Music] [Music] yeah it's definitely getting there lucky definitely getting [Music] there you're all a part of it to give it away is going to be rough I'm going to have to make one for myself somebody's going to be somebody's going to have one of the largest pull tabs in the world that's for sure where [Music] [Music] [Music] yeah that wouldn't be a bad idea [Music] either that was one of the items on the pole was to make a detecting coil that was winning then the uh full T well somebody came in on the last couple of votes and just pushed it right right through but yeah I can run some copper wire on oil I just don't have any way of tuning [Music] it I will say I like the my note the legend but uh man if I could get a hold of the software to make the menu cleaner I would in a heartbeat in a heartbeat I mean I already know how I would do it me I have a uh I got a a decent program on it right now I only get Iron's notched out I think at 34 I'm on Square tones and I honestly love the square tones over the beeping cuz I can't stand things that beep but uh yeah it's pretty pretty solid program I where I'm at is just there's iron nails gure and I can really squeak in there with the sniper coil like this piece of silver that I found today is pretty is small and it I literally went back and forth like 10 times in the same spot until I was able to pull it hit it exactly where and it kept ringing true so I dug and thank God I did cuz it's a really nice piece I just got to figure out what it was for um but really really really cool piece it it may be military related but I'm not 100% [Music] [Music] sure wonder if I see if I can get a little more light over [Music] here this my work C [Music] [Music] [Music] [Music] [Music] all right give that a minute to catch up we might have a little bit better lighting [Music] here oh that's great [Music] 513 yo show me when did you kick in the back door I didn't even see [Music] you oh yeah I think that lights [Music] better you must you must have jumped in when I was gathering uh [Music] that's just a bucket of uh bottles I'm fine don't worry about [Music] me all right yeah we got we got a pull times pull tab times a th going on love it loving it [Music] wait is this that song again hell yeah but show me go get it man I I hope you bang out some good stuff [Music] yeah I probably should have I detected when it was the hottest part of the day bad idea oh I think it's going over across the top now we're sealing it up baby let's go [Music] oh yeah we jamming I'm chair dancing oh yeah it's getting closed up boom you know technically uh I can't do that but technically as a wall hanger I wouldn't really need to do both parts of this but for the sake of doing it I think I have to make the other half but technically as a wall hanger you wouldn't need the other side of the pull tab [Music] H oh no this giveaway show me we're doing a giveaway you might own it yeah I'll have to I'll have to look at that or or or I'll probably just print the other side and then make a [Music] decision but the whole tops going on now it's it probably has I forget how many layers the top is but uh it's getting sealed up at least you guys be able to see a a completed top half anyway that's up to you show me but if that yard's pretty good and you know don't have a lot of time go smack it out baby but if you want to hang out that's awesome [Music] too you're just going to jam it out till the end why not [Music] as long as I got coffee and cigarettes I ain't going [Laughter] nowhere yeah man go beep around well we'll have uh you can always click back at the end of the video and see see the final I'm not probably not going I'm not going to pop this thing off of here for a while though cuz the bed's heated um I want this thing to completely cool down before I pop it that will uh slow down let it slow down and cool properly and I won't get any warping I do not want to deal with a warp or this whole piece is for nothing I mean I could try heat gunning it in the shape but got a chance of putting another extra warp in it but I mean I will try it because not I got to print the whole thing over again but yeah I won't be lifting this off tonight but it's going to look completed pretty close to completed pretty soon heck yeah let's go but yeah go beep around man swing and beep swing and beep [Music] oh yeah boom shakalaka [Music] baby huh maybe I should make three different sizes and maybe do a three three giveaways I don't know one massive giveaway or maybe this a big one a medium siiz one and then a smaller one for first second and third I mean I could I could pretty much put these on and go to bed and it'll just be waiting for me in the morning [Music] [Music] you might be hanging it never know you know I just I just refreshed my page I'm not delayed as much as I thought I was I don't think let me say and in front and gone oh yeah I I was delayed yeah so like three different sizes for like a first second and third [Music] place I could do charms couple coats of um well I don't know what what would be uh I'd have to figure out what kind of clear coat would be like skin safe so to speak or that would be a necklace charm maybe a different kind of charm yeah a little charmer pendants I I could literally do um probably like 10 at a time [Music] I could make them make them all in a line and just connect them all so I could just pour one time and make 10 [Music] oh looks like we're going to be doing some [Music] charms oh pull tab earrings uhoh we're going all out dispatch detecting costume jewelry for metal detectors pull tabs are us let's go [Music] yeah you got to give the people what they [Music] want silver pull tabs I mean I could but [Music] I guess there gets to be a point of how much is too [Music] much and I kind of want to do this for fun not profit I mean little donation or something once in a while wouldn't be bad but I mean I'm not I'm not doing this to try to make money this is this is all for fun all right time to change this all you never know what you're going to get all right there we go a little jumping let's [Music] go H the gold pull tab I'll I'll do a gold P oh no I I if I if I was a big YouTuber I would totally do a gold a gold pull tab but not not shoting for that so we may have to go with the poor man's gold and just do [Laughter] [Music] [Music] silver I don't know you know what like a a copper bronzi is brass pull tab would look pretty cool too or wrap it with gold leaf we can do [Music] that do a little gold leaf wrap on [Music] it so I guess I'll have to side do I go ahead and bang out the large one first I hate to make all the templates and something needed to be adjusted so I don't know I maybe I should I should make a small one and try it before I make the medium size one cuz if the smaller one works the rest are going to work so the smaller the item is the it's almost the harder it [Music] is yeah it's going to be a fun for if you haven't watched uh when I made my my dispatch detecting coin um I got a video on that all right have a good night buddy thanks for hanging out stopping in appreciate it 100% have a good rest of your weekend as well hope the weather weather works out for you [Music] [Music] a it's taking shape look at that all right it is taking shape to shame I don't know if you you guys can't really see it like I do but streaming quality is isn't as good and that that's just the first St layer the second one that really looks smooth I never did have a direct light over top of this thing but I got I got a pretty good light on it but when I'm when I watch it on the YouTube screen it's not as good but you can get the gist of it anyway even though it looks a little off being you know with the with the black plastic right now but just imagine it being aluminum color oh yeah I can't wait I have all the aluminum I need ready to go gas in the propane tank I might even be able to get it done this weekend it'd be a perfect time we'll see I'd have to either do it late at night well that'd be bad for filming or get up early and get it done although the night pour is pretty cool but it's only look cool cuz you could see it glowing I did a night pour of copper it was pretty wicked looking if I had the right lighting where you could see kind of both that it's it's pretty neat yeah and I guess it would be pretty cool too maybe maybe if this if this goes well and somebody wants their logo in there or their you know not the logo but you know their name of their Channel inside maybe you know we could do something that'd be pretty cool cuz right now it's going to have dispatch detecting in there but um yeah I think that'd be pretty cool I was actually thinking about doing that Yodi um maybe if if I when I do the next one um I'll do a time lapse uh or a hyperlapse and uh yeah that that would be pretty cool yeah I I won't I won't put you guys through this and do another live stream but I just figured eh I wasn't even planning to doing a live stream it just it just a thought came into my head it grabbed the TR tripod my other phone and just threw it up there and it is what it is but yeah hyperlapse with a video would be cool [Music] yeah they also have um they also have a it it takes a lot but they they have uh hyperlapse for 3D printers where you never even see the uh uh the printer head and you just see the layers build up it's pretty cool [Music] oh yeah jamming doing my chair [Music] [Music] dancing yo gopher well I ran a pole it was time to uh melt down some scrap metal of all my finds and it was either a detecting coil a large one uh well not a large one but a detecting coil a massive pull tab or another type of coin and the pull tab worked so we're making the biggest pull tab possibly in the world and uh we're going to give this thing away we're going to make it out of aluminum and when it's done this is just a pattern and then uh we'll have a giveaway should be pretty cool a skateboard in the shape of a pull tab there that's different and I'm going to do a video goer on um you know melting the uh the aluminum down and then sand casting this template pattern here and uh you know making the uh the massive pull tab so should be a good time might make a uh a first second and third with a medium and a slightly smaller one [Music] okay Pro you you probably would have never thought you would ever say that to anybody that uh yeah just you know we sat here you know for 3 hours watching a 3D printer run around in circles but you got to admit it's better than watching paint dry or grass grow come [Laughter] [Music] on uh I would probably say the pull tab would probably weigh maybe a half a pound it depends if I just if if I make all of it or maybe half of it as a wall hanger like I mean let's face it I mean when this is done it's more of a a paper weight slash wall hanging type of thing or you know it'd be really cool I mean I as an creator of sort like imagine putting your picture inside the pull tab area of like a detecting F that'd be pretty sharp or or in the center with the circle is have an item that you found a ring or something like there's a lot of different things you can do with [Music] it so I just got I have to see see how it looks you know once it once it cools down you know put it up on the wall I'm going to probably just make the other the other hand anyway and uh just see how what the difference is make a decision on [Music] that cuz when this is up on the wall right now I mean it's still going to look like the pull tab so it just wouldn't have the rounded portion in the [Music] back so just have to see how that goes and I mean honestly I I I can't wait to give it [Music] away it's it's definitely going to be fun [Music] or I wonder maybe I well if I make if depending on how I do it maybe I can have a a you know a shortened video of making it and doing a doing a you know well how am I going I got to think of how I'm going to do that where I can give it you know give it away with everyone there but I kind of want to do it live all the things you got to think about if you win it what would you do with it guess it's hard to say until you see but once this uh it's honestly just about done so uh when this gets done this might even be the last pass um I'll just get I'll just get a better camera shot of it while it's on the bed cooling down and then I'll wrap up this stream but um yeah we'll figure out we'll figure out the way to give this thing away want to do it live I don't know if I want to do a duck race or not but want to do something different I mean the duck races are cool but I don't know oh wait a second maybe I'll put a bunch of pull tabs in a jar and you have to guess how many's inside of it and then you get to watch me count them slowly until to find out who [Laughter] wins yeah there's there's only about 10 minutes left oh actually oh the can that big oh Christmas no I could easily make the can but not a can to fit this pull tab I don't have I don't have a 3D printer big enough [Music] mana's back yep it's almost done yeah that that might be fun guess guess the the amount of pull tabs in the jar I don't know want to do something different besides the duck race hey Patty from dirt CLA just showed up how you doing we making that massive pull tab we're going to melt down some aluminum silver assassin wants to do a fight to the death says a 6' 19 in guy I I'll give it a shot though I'm pretty fast not bad for an old guy I'm [Laughter] kidding I'm a love not a fighter you'd have to let me get started while you're [Laughter] [Music] sleeping oh [Music] yeah oh it's looking good see if I can't adjust this light to the other [Music] side does it hurt or help let's find [Music] out it's behind the camera so it shouldn't glare probably should have had that here the whole [Music] time this light is as bright as the sun my goodness you would you would think this thing would be glow it's glowing up it's glowing just looking at it but on camera doesn't lighting is such a pain in the ass you light up my pull [Music] tab oh yeah it's coming out good it's going to be a fun giveaway I can't wait [Music] [Music] [Music] [Music] yeah pretty sure this is the last pass for the top layer [Music] yeah I have to uh I have to look up see uh what the size of some pull tabs people made lucky said you could find only a 6in one we got one that's 12 we go big you're go home hey well I I didn't lie it's it's massive well I guess everyone can have their own definition of mass massive but in comparison to a real pull tab which is right there it's pretty [Music] [Music] massive what do you guys think Duck Race c pull tabs what do you think we can do to make this more [Music] fun I'm not sure Amanda said his camera full [Music] [Music] tabs maybe do something uh the closest to the count without being over nah don't even need to do that it's going to be hard enough to figure out how many pull tabs are in a jar it's all about those pull tabs baby it's funny something that uh we all dig up all the time yet here it is a trophy oh man it's not it's not a big ring it's not any cool piece of jewelry it's a pull tab but to dig those pull tabs is to find the ring wingman's back yes you got that right I already cooked up a lot a lot of that stuff though from uh when I did the coin so I'm going to melt down the rest of the aluminum that I found since the last thing and then probably have to add some oh yeah part that you can't see is looking good I definitely appreciate all you guys that hung out shoot the with me had had a lot of fun would have been boring all by myself yo and NorCal just comes tearing off the roof and jumping in what's up buddy you know we just out here in h the dispatchers Den you know making the the biggest pull tab in the world because we can we going to turn this baby into aluminum do a cool giveaway it's just about done [Music] yeah we talked about burying this thing on the beach when I know there's going to actually a seated hunt would be perfect and uh you know what I might I might just I might print out and make a crusty zinc and why not cuz we could do that too and I can pour it out of copper make it make it large massive copper zincing why [Music] not hey 18 te Lynch you know we're making that massive pull tab baby going to be aluminum when it's all done and we're going to give it give it away oh man the penil eraser oh boy yeah we could do that too yeah I found my first one this year I don't I don't really get to get into any parks but the one Park I did get to that's where I found it oh well congratulations at least you got a ring sure the beach was nice was it crowded just in time L just about done oh the bottle cap uh-oh uh-oh it's done [Music] let me uh I got to move can I keep this here I think so I need more cord no [Music] [Music] yeah I'm not going to take I'm not going to take it off the bed yet I want the bed's got to cool down it's a heated bed but uh yeah let me try to change the angle of this a little bit camera's going to get squirrly guys [Music] move this all right you got guys made it we got the uh the largest pull tab let's go and I'll get this thing uh pulled off after it gets cooled down probably throw it up on a community post just to let everybody know what they uh they have coming up and uh again we have the the pull tab fits in the hole of the other pull tab that's how big it is and uh yeah we'll get this thing tested out I got to make sure that it'll sandcast well and uh then we'll try to make a first second and third looks like we may do a uh count a pull tab from a jar guess how many pull tabs are in a jar type of uh prize whoever gets closest to the number of pull tabs in a jar wins and we'll do it on a live and then we'll get this thing giv away and uh yeah once again now that it stopped moving it's exactly 12 Ines with just over six at the widest point so massive P Tad yeah you wouldn't want to be digging these babies up but yeah we're going to uh we're going to get this thing all tested up we're going to pour this baby out of some cans Sal all aluminum we're going to melt down cans pull tabs all the aluminum stuff that I found and then probably have to add some and uh yeah this is going to be uh pretty cool so can't wait to give this thing away it's going to be a fun giveaway and we're just giving it away to give it away so um I'm [Applause] excited I think it's going to be uh really fun yeah I mean it is uh it is it is of a different [Laughter] variety but uh yeah it's uh it's it's definitely fun now that it's all done you know we're all getting to see it together you know it's it's going to look nice up on the wall and like I said you know if you wanted to you could either put a photo in the back of this of you finding something you know there's you put your find in here uh you know there's so many different things and what I might do is uh you know I maybe maybe if this goes smooth enough is maybe put your the winning logo in here I'm not sure yet so that's all again I I that would probably not happen I don't know but maybe we'll see how that we'll see how the rest of this goes but um I think that would be pretty cool so uh yeah but definitely appreciate you yeah I I mean if you want to bling this out like a Mr T starter kitten pull tab running guy you you put that baby on a chain oh you know what you want to show up you want to show up to one of them major hunts wrap that thing around your neck and walk in the pl like you own the place you know you got the you're wearing the massive P the pull tab so you walk into them big big hunts like the one and Bone supporting the the the pull tab like that oh man let's [Laughter] go oh but yeah no I definitely appreciate you all hanging out um you know I didn't expect to didn't expect as many people to watch a 3D printer run as you guys did I super appreciate you hanging out cuz I would have been all alone if if it wasn't for you guys so um so appreciate uh you guys hanging out chitchatting uh we talked about food and all kind of stuff today so we had a really good time and uh um yeah so I think we're going to we're going to end this here um we'll we'll get we'll get something going again I'm going to make sure when I pull this thing off if I'm going to I'm still going to do the other side of this and maybe you know maybe let you guys decide or you know maybe I'll just be able to say no this is just good the way it is uh keep it flat in the back if someone wants to put a photo inside of there they can um you know imagine imagine this on your wall and you with your photo in here pulling out a pull tab I mean it doesn't get any better than [Laughter] that but uh either way thanks guys for hanging out um I'm going to end this here and uh yeah we'll see you guys all on the flip uh once again I appreciate it and uh yall have an awesome night and a great weekend thanks guys peace out

Channel: Dispatched Detecting

Views: 118

Keywords: metaldetecting, gold, treasure, silver, hunting, funny, coins, relics, history, antique, vintage, minelabs, nokta legend, farm, 1800`s, jewlery, ring, fishing, magnet fishing, old, ancient, awesome, amazing, crazy

Id: TC_5-mumI5g

Length: 221min 26sec (13286 seconds)

Published: Sun May 26 2024