Tôi đã làm chiếc du thuyền câu cá chạy động cơ ô tô phế liệu

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
Hi everybody I would like to introduce to everyone the boat I just completed The boat is 9m long and 2m wide on average Made from fiberglass and wood materials I used an old Boxer car engine from the scrap yard to install on the boat And I have it paired with a 15 horsepower electric motor Subaru EJ18 Boxer engine The car's engine was broken in many places in an accident Oil leaked into the combustion chamber and bent the intake valve Camshaft pulley is broken I sealed the engine valves by hand Clean the old gasket on the engine cylinder head Adjust engine ignition angle I used plywood to make the boat mold Wax8 non-stick agent used in fiberglass materials Apply to entire formwork surface White glecoat paint protects the surface I will apply 6 layers of fiberglass to the entire surface Combined with fiberglass fabric to help increase the stability of the boat Partially separate the plywood mold I used plastic water pipes cut in half to make a reinforced frame Glue 4 layers of fiberglass to the frame High hardness gelcoat paint for the bottom of the boat I made a mold of the propeller water shield out of plywood Apply non-stick agent to easily release the mold fiberglass fabric reinforced with plastic pipes cut in half Separate the mold and remove the plywood Reinforce the boat's walls with wood Tighten the rope to level the frame Install stainless steel pipes To attach a faucet to let water flow into the tube to cool the tube shaft Welding of engine base I made a block to block the water from entering the boat add lubricating oil oil blocking Connect the water barrier to the shaft tube with a rubber hose I installed a forward and reverse transmission with a gear ratio of 1 divided by 3 Engine anti-vibration rubber Connect the engine to the gearbox using a rubber coupling from an old car tire Homemade water suction and garbage blocker Make a belt adjuster sea ​​water pump Circulating cooling of sea water Connect the seawater pump to the circulating cooler Connect the circulating cooler to the engine Sea water will cool the engine coolant in the circulating cooler Cool water will cool the engine, sea water will go out Suspension rubber for engine exhaust pipe Connect the seawater pipe coming out of the circulating cooler Water entering the exhaust pipe both reduces sound and cools the exhaust pipe Forward and reverse gear box Remove one gear, it becomes a forward transmission and does not work 13kw electric motor 3-phase motor control circuit Shut off the engine and start the engine Engine oil pump pressure gauge Engine throttle lever and gearshift lever The 90-degree gearbox has a gear ratio of 1 divided by 6 for the steering system Steel rubber hose guides the steering line The boat is running with electric motor The boat runs on one-third the power of an electric motor
Info
Channel: NASAT Sáng Tạo
Views: 796,503
Rating: undefined out of 5
Keywords: diy boat, cano tự chế, kênh sáng tạo, homemade boat, boat building, catamaran build, making a boat, sáng tạo hay, diy fishing boat, engine recovery, scrap engine, phục hồi động cơ cũ, thuyền câu cá tự chế
Id: Ufoi6QW0b1o
Channel Id: undefined
Length: 65min 28sec (3928 seconds)
Published: Sat May 25 2024
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.