Karmann Ghia full build

how's it going guys this is my first YouTube channel today I'm going to be start building a 1972 volz hogen KAG geia I just want to build something different this is the car I picked I lowered it down to the ride height now we're just going to start doing by the kit so let's do [Music] this okay guys um so I used the hot glue gun and I got these four packs I don't know how much in the pack but they're the best way to go seems like it works pretty smooth and it's Dam pretty strong too so I got my mup now I'm going to start pulling tape yeah move towards the front okay let's do this [Music] I just did rear quarter panel and it looks bomb uh this is first time I've been working with the tape I just seen some video on YouTube how to do the white body kit so I was like I can try to do it and see how it going it turns out and actually for the first time it looks good there's some from the back and on the bottom I just have to still tape all this stuff this is how it's going to be it's a going to be finished product then over here I want to kind of round it down and do this whole piece quarter panel and I'm going to have like a little lip it will come out so I'm going to do all this and we just keep moving towards the front yeah like I said it's the first time for the first time it looks freaking amazing let's keep [Music] [Music] going well guys um it's getting late um I have to go to work tomorrow so I'm going to stop for tonight and continue tomorrow see you guys how's it going guys uh it's literally the next day I've been working pretty late last night uh working on the rear quarter panel got that one halfway done if you guys can see that's what I stupped at my plan was to get the rear quarter panel done and just work my way down there's the front but I cannot come with the idea how I want to do my side skirt so I think I'm going to leave this for later so I'm going to go to the TS the front fender and start doing mup for the white body so we're going to do the front I got stuff ready so let's do this so I got these made out of plastic they come I bought it from Amazon two sheets 4x8 and they you're like an eight an inch thick it's easy to work with you don't have to have a grinder I just uh use a pocket knife just score it and use the pliers just pop it and comes right off but the problem is comes with this sharp lip so what I do just take a pocket knife and shave it off and make it nice and pretty that's what I'm going to do right [Applause] now it's bit of clean and it's flexible so okay let's do this so going to start off with [Music] okay guys um so I got mukup finished what it looks like these sticks they're so to freaking work it's amazing so yeah got the muck up now time to get a tape and start taping so let's do [Music] [Applause] [Music] this okay guys so I finished the front it looks so good what I was afraid when I'm going to glue this top rip all the way and it's going to look like crap but look at that that looks so freaking good all nice and straight here's some from distance so now since I got the front done now I can do to uh try to figure out what I'm going to do with the side skirt cuz my original plan is I want to do rear quarter panel front and uh side skir do all in one piece then I will decide what I want to cut I think it will be easier so that way I can fiberglass it all in one piece and just go from there yeah let's try do the Sid cirt how's it going guys it's next day again I just finished driver's side all taped up I'm going to show you guys what it looks like I had to do a little bit changes here and there but other than that looks pretty good all I think it looks good oh yeah now so I'm moving to the passenger side and I'm trying to keep it the same that side same as this one so what I did I took a tape and I follow this line all the way over there and to pretty much just tape this lip right here the little section all the way that way and I transferred it to this side I don't know if you guys can see but the one with the arrows that's the line I'm going to follow all the way to the other side so now yeah finish the lip I think it looks pretty good like if you stand from over here I think it looks good so yeah it's time to do the passenger sight so let's go

Channel: Dream build

Views: 15,231

Keywords: Wide Body Kit, Custom Car Body, Fender Flares, Karmann Ghia Widebody, Car Body Modification, DIY Widebody, Custom Car Fabrication, Wide Arch Kit, Car Body Extension, Wide Wheels and Tires, Widebody Conversion, Custom Flared Fenders, Karmann Ghia Customization, Body Kit Installation, Fiberglass Wide Body, Aero Kit Build, Car Body Design, Widebody Styling, Widebody Welding, Karmann Ghia Bodywork

Id: _pjyjSzJO9w

Length: 7min 5sec (425 seconds)

Published: Thu Jan 04 2024