John Deere 3038e bucket level indicator (no drilling)

so here's my new John Deere 3038 tractor I got a few weeks ago the front loaders don't come with a bucket level indicator so I decided to make one two reasons one I didn't want to pay over a hundred bucks and have it shipped and I'm cheap so what I did just quick view I went to Home Depot and bought a quarter inch beam clamp and screwed it down to the bucket there and then what I did I'll just show you I took a quarter inch bolt two inches long slid on four 3/8 inch nuts and then kind of lock those down with a quarter inch I welded the all-thread to the center two nuts so it kind of works like a bearing I guess and then I mounted the eye bolt thanks to John Deere there's already a hole there mounted the eye bolt just a half inch eye bolt through the loader there I knotch the all thread bent it to the angle I wanted welded it so it's strong again then I put two small welds on each side of the eye bolt so I know exactly when it drops into level it actually works pretty good I'm not digging holes in my property anymore let's start this up and make it work real fast right there a non level we're pretty good good enough of what I need to get down around the property and as you can see I'm perfectly level and it costs me less than 15 bucks

Channel: Brandon Storer

Views: 11,307

Rating: 4.826087 out of 5

Keywords:

Id: chm4dJxyogA

Length: 2min 17sec (137 seconds)

Published: Thu Dec 20 2018