I made a BIG MISTAKE!!

foreign [Music] World we're back PDR here and uh we've got an extreme paintless dent repair uh session in front of us right here we're gonna document it as much as possible but let me show you what we're looking at if we take a look at this entire Vehicles side we've got what we would call sorry about the background noise um we're in the new place and it's awesome we're blessed and hopefully everybody else is blessed and the only one that blesses you is God so check this thing out this car was multiple kicked I would say kicked 15 to 20 times and if we analyze what happened in this Dent um I think the owner told me that down here was an accident previous actual got hit by a car we'll do whatever we can for that same thing down here it crushed this body line that wasn't the kick that was an actual uh Collision but then up here we had one two three four looks like I don't know so this is the brace right here that we're seeing come through and this is also the brace that we're seeing come through so one two and probably one right here something right here big old one through the body line right here um as I go down with this you'll see this is you know multiple inclusions in this Dent it wavers around and has a big moon Crescent comes down through here crushes all of these Body Lines and then has a High Ridge through it we're not expecting anything this is like the uh the do what we can for a really good friend deal and uh got broken paint right here let's let's understand we got some broken paint there probably some crack paint right in the center of that too um so let's understand we're not going for any kind of perfection I'm not gonna try to prove that I'm the best enca in the world because I'm not I'm just gonna try to do some uh glexo cold glues on this then some hot glues and then some Taps on the brow and see how much we can get out of this thing we might even do like a little couple of clicks through like a time lapse thing because I know that I'm gonna spend five to ten hours on this thing for for fun and uh the only way I can say it is uh something like this is the most extreme Dent work that I've ever done and um we're gonna see how it comes out so give me a couple of minutes and for you it's going to be instant but we'll see what we get get done here okay guys let's see what we can do with this I'm gonna take some glaxy cold glue I just stretched it and rubbed it and got it nice and warm um that's a drone we're hearing in the background somebody's just having fun a little bit and obviously you're seeing I'm going for the most severe part first right where somebody would have kicked okay make sure it's still nice and sticky sometimes you got to do this with the glexo is you got to go like this give it a couple more stretches and then lay it back on I try to get as much off of my hands as possible and then we put it back up here and I do want to say thank you all for clicking on this video I really do appreciate it um all of your awesome comments we read them and we love them we appreciate them I hope to be able to comment back to him let's see if we can do some of this really severe part down here with the cold glue I wanted to move hey maybe I should have done this bottom part first you know it's it's all about tension guys you know where is that tension being held um so literally in my 27 years of Dent repair I would have never touched something this big ever but then when you look at it like it's just a big order where does it start let's see if we can get some of the tension out of this metal maybe right in the middle uh it wants to kind of Pop see wants to give it a nice little pop maybe I'm thinking right here okay maybe a little bit more right here we'll do what we can for that massive transformation let's see if we can go to this back door flip the glue over on top of itself put it right into this spot secure it and give it a nice pop right right up against that body line secure it kind of swiggle it in make sure my head on that thing is secured and then when I pop it all one movement big old pop okay same thing right here drop it in wiggle it am I ready I don't know one big movement huh did it move maybe can we do it just instantly again yeah what if we did it like 50 times it'll move more this is a great product but it's also a prelim of roughing out a large huge area this is not how you do uh paintless dent repair on a finite level of course so yeah I'm already kind of almost out of breath from the pulling that I'm trying to accomplish with this how about right here oh look at what you guys just saw keep rolling keep rolling and I'm going to show you the edge of this rubbed up against that obviously on this kind of job we're not going to worry about how much uh if I put a little scratch in it but I want you to see what really can be done okay I put a little surface line in it and that line should buff out so yes my bad I completely just showed on camera a slip which is actually one of a great learning thing because um great Learning lesson because one thing you want to do when I said make sure that the head is secured so you always want to make sure it's super secured and whenever you pull from it you always want to keep your hand right there holding on to it holding on to everything hand right up against there so it doesn't slide off and this thing won't slide out like it did because what happened is this slid off and went into that luckily it buffed out and if it doesn't we'll touch it up if we have to but I think it'll buff out nice and I put a little line in there and I'm gonna have to do this whole door anyway so um you guys got to see the reels you know that was that was actually wow me being impatient but it was the first time that I've ever dented a car um unless it was intentionally to do a dent to show somebody and then do it again out but no this was one of the very first unintentional things and if you're wondering if the customer will be mad no because the customer is basically a friend that I'm doing a a favor for and he literally said I was either going to get a new door you could see what you could try to do for it and if he still has to get a new door then he gets a new door but we're just going to see what we can do with the paintless method today and you guys get to see the reels I don't hide stuff um that's what happens hey you always watch your tools if this thing isn't secured then you can have a lot of problems if it slides off on you and that's exactly what just happened to me so that slid off and you always want to make sure that's fully secured on tight is there any more areas that we can pull with this Maybe maybe right here through the big middle keep my hand on that and all one movement wants to move it wants to move back won't straighten that line right this is an inner round we want to keep that down there's the brace and then it comes up through here let's see what we can do right here gosh I can't believe I did that guys that's a total noob move it was me being impatient but I'm definitely not going to I'd have wifey do that no just joking we show the reels here oh it just slipped off again so what is the solution to that basically Slow Down slow down be patient just have a little bit more patience yeah that's that's still we're at the point now what what I want to do is take down any high brow give some tap to this give some tap to this give some tap to all these and then maybe even come back with something like this most likely come back with a normal glue taps so the next time you see us this is going to be either glue tabbing yep I think we're going to be glue tabbing right around this line right around this line down through here down through here and then a lot of tapping through the middle I'm going to save you guys the pain of watching you tap but I might have her throw a couple of Stills in there because basically what it's going to be is tap down on this brow tap down on that brow get the majority of that metal out and for the first click of transition this is what we get we're 15 minutes in see you in a bit okay guys we're back I'm gonna make sure my glue gun is warm and hot I keep on turning it on and off to save the battery I did one round of pulls Pop Pop um wanted to film it but we got a baby now I don't know if I even told you that but uh oh yeah PDR has a new addition to the family our little girl's almost a year old now and so that's probably one of the reasons why we haven't made videos in a while um but now what I want to do is I want to get the majority of this pulled out but obviously you see it's pushed up against this brace same thing here I'd love to pull right here where the base of the foot probably hit um so what do I think something like that uh wifey just said just take your big old you know uh pirate hook and get in there and push all that out like a real you know like I should and she's right I really should I should just get the pirate hook get in there push most of this out find access to that one maybe take the door panel off whatever but we're gonna do what we can with the glue pulling system we're kind of um obviously a touch up my little scratch we'll touch up other ones he had another scratch right here same kind of thing I'm not too worried about the scratches what I'm worried about obviously is the dents so um and this is basically trying to salvage doors that are literally almost undoable for PDR I mean what would you what would you think probably undoable for PDR with all this brow work and I will say right now the amount of time I'm looking at this and the amount of time for me to go through these doors and do them the way that I would like to do would probably be 30 hours minimum per door and I don't I'm not doing that you know that so we're just doing what we can I've spent probably an hour hour and a half on it so far um I just took the big tab on there I'm gonna just let it sit it's a nice and warm day out I'd probably about 72 degrees out right now so perfect temp for the tab weld glue large caico tab um wifey was just standing underneath the uh um strong arm XL holding up the uh get a gripnow.com umbrella not a sponsor a couple of good poles the way I want it I think so let's give it a couple more you see I got my finger finger all the time now am I learned from my mistakes yeah that's just something that you could do all the time I got the alcohol to get the tab off uh 100 alcohol 99.9 Electronics grade alcohol that we use it just works so much better than a 70 alcohol um which just fights you you see it's even still leaving a little bit of glue I'm taking my time and then those little pads of glue that it leaves they just roll right off a little bit of a little bit of alcohol they roll right off that actually moved a lot of metal guys so if we're looking for the same thing let's do the same thing right here let's just load this tab up tons of glue I'm putting on this tab 15 poles you know a quarter of a hole stick right there I just used a good inch and a half of that stick and it's probably not enough but uh do I want to go sideways no I want to go this way if I do two of them I'll do two of them but I want to get the majority of this seal it all up all the way around make sure it's all tight pushed I can feel when it starts to cool and now let's pull foreign that actually moved a lot good result it's gonna make any amount of pushing a lot easier and the way that the glue is pulling off both the tab and the car at the same time is it looks weird but it's actually what you want you want it to be perfectly balanced in between the tab and the car so that you don't worry about pulling off paint and it doesn't just all come off the tab at once or all come off the car at once if you actually got it to blend in between the tab and the car and have that result that's what I consider a perfect result for a glue pull because that moved a lot of metal it crusted right where I wanted it to Crest we've got a little bit of tooling to be done obviously this is now painless dent repair we're talking about painless dent repair here not huge Style Collision but a little bit more of a crease same thing we have down here uh we'll come back to you in a bit and I'll be doing some more pulls and I might even get to a point where we're tooling some of these dents out thanks for sticking with me guys see you in a bit [Music] okay guys here's what we are mid I wouldn't say Midway twenty percent in um I'm started it's starting to take shape I've got all my hammers out obviously the Shane Jacks jackhammer the number one hammer in the world with a super nice titanium tip on it this brow has to come down this brow right here has to come down this brow has to come down haven't been doing too much beating on it this has to go in right here let's see if we can get it in that'll come in when we get this out uh this has to go in this line has to remain out and get there obviously lots of uh you know I really didn't know how big of a thing this would be when I took it on and it was something that told me was well God told me you know you could do something for them and make it look much better so I say to him you know you want me to try and make it look much better and that's all we're doing we're trying to make it look much better let me show you the the light on it um from the bottom all the way up I mean distortion this whole line is you know still crushed this big thing coming out I mean is that even possible to straighten gosh you know 50 hours maybe this whole top area is where I'm gonna focus my energies these two top Body Lines obviously but yeah if I can get this looking nice which this is almost a normal Dent now this has got a big long crease down here tight brow and then obviously paint damage and then we come through here and we've got two of the same kind of things long crease down here and a long crease through here but once I actually tap this down um a lot of it's going to release and releasing that tension this is a leather straw and I was doing some of this that when I had a brow to it it would actually wiggle back and forth so I could feel it on top of that brow and I would give it some nice taps until we flatten out that brow this actually just moves a lot of metal really quick if you're very careful you know obviously I could do a lot of damage if I messed up um and you know this was kind of the mistake video uh but as far as what we're doing for the car and what we did to mess it up with this little scratch line uh last thing I'll do is open up the door and take this little dent out like it's a little tiny Ding and that will be the least of our problems um something like this something like this maybe I don't know there we go look at that guys look at that okay so that straightened up the rest of that door it looks like a little bit beaten down but yeah that actually did a lot for it and I'm glad that came out the way it did so you know this is just one of these ones we'll come back and give you another we might do a little time lapse but we'll come back and we'll give you another update uh this might be a two or three or four day job who knows um or we might just get it as good as we can in one day so we'll come back and show you a little bit more of a result in a bit [Music] [Music] thank you [Music]

Channel: PDR Peterson Dent Repair

Views: 17,571

Keywords: Dent, garth peterson, peterson dent repair, paintless dent removal, PDR in Seattle, Mega Media, glue pull action, 4k glue pull, action pdr, mobile dent repair, dentless repair, pdr, paintless, dent removal seattle, dent time, car dent puller, learning pdr, pdr training, door ding removal, dent doctor, Repair, Learning PDR, PDR secrets, Seattle PDR, PDR in Washington, Dent professionals, PDR tips, PDR Peterson-Dent-Repair, USA PDR, Luxury PDR, Undented, How to remove dents

Id: fQG0X2qdc7k

Length: 20min 41sec (1241 seconds)

Published: Mon Jun 05 2023