Sometimes the simplest questions have the
most amazing answers. Like how can trees be so tall?
It's a question that doesn't even seem like it needs an answer. Trees just are tall.
Some of them are over 100 meters. Why should there be a height limit? I'll tell you why. Tress need to transport
water from their roots up into their topmost branches in order to survive. And that is
no trivial task. There is a limit to the height that water
can be sucked up a tube - it's 10 meters. If you suck on a long vertical straw, the
water will go no higher than 10 meters. At this point there will be a perfect vacuum
at the top of the straw and the water will start to boil spontaneously. For a tree to
raise water 100 meters, it would have to create a pressure difference of 10 atmospheres. How would trees do that? When I posed this conundrum, a lot of people
said the answer is transpiration. And that's when water evaporates from the leaf, pulling
up the water molecules behind it. Now that's clearly a mechanism a tree can use to create
suction, but it doesn't help us overcome this 10 meter limit.
The lowest the pressure can go is a pure vacuum, which I imagine is not happening inside of
tree leaves, right? Right, Hank. So you might suspect that a tree
does not contain continuous straw-like tubes The tree effectively has valves in it. So
you don't have a column of water This big tube that you're saying needs to
be full of water is actually made up of cells. Although these are good speculations, they
don't turn out to be correct. Scientists who study trees find that the xylem
tubes that transport water do contain a continuous water column. So how else could the tree transport
water from the roots to the leaves? They don't suck, they don't use a vacuum. OK, so how do they do it? Squeezing like a cow udder all the way up.
They have little tree muscles in there. Yeah.
Besides being a giant waste of energy, all of the cells that make up the xylem tubes
are all dead. What about osmotic pressure? If there is more
solute in the roots than in the surrounding soil, water would be pushed up the tree. But
some trees live in mangroves, where the water is so salty that osmotic pressure actually
acts in the other direction so the tree needs additional pressure to suck water into the
tree. Then it must be capillary action. The thinner
the tube, the higher the water can climb. But the tubes in a tree are too wide - at
20-200 micrometers in diameter, water should rise less than a meter. So how do trees do it? Well one of the assumptions we made is wrong:
The lowest the pressure can go is a pure vacuum pure vacuum
pure vacuum In a gas, this is true. When you eliminate
all of the gas molecules, the pressure is zero and you have a perfect vacuum. But in a liquid, you can go lower than 0 pressure
and actually get negative pressures. In a solid, we would think of this as tension.
This means that the molecules are pulling on each other and their surroundings. As the water evaporates from the pores of
the cell wall, they create immense negative pressures of -15 atmospheres in an average
tree. Think about the air-water interface at the pore. There is one atmosphere of pressure
pushing in and negative 15 atmospheres of suction on the other side. So why doesn't
the meniscus break? Because the pores are tiny, only 2-5 nanometres in diameter. At
this scale, water's high surface tension ensures the air-water boundary can withstand huge
pressures without caving. As you move down the tree, the pressure increases,
up to atmospheric at the roots. So you can have a large pressure difference between the
top and bottom of the tree because the pressure at the top is so negative. But hang on, if the pressure near the top
is negative 15 atmospheres, shouldn't the water be boiling? Yes. Yes it should. But changing phase from liquid to gas requires
activation energy. And that can come in the form of a nucleation site like a tiny air
bubble. That's why it's so important that the xylem tubes contain no air bubbles, and
they can do this because unlike a straw, they have been water-filled from the start. This
way, water remains in the metastable liquid state when it really should be boiling. It's just like supercooled water remains liquid
when it really should be ice. So you could say that the water in a tree is supersucked
because it remains liquid at such negative pressures. And why are trees moving all this water up
the tree? I want you to make a guess, say it out loud.
For photosynthesis? Actually, no. Less than 1% of the water is
used in photosynthetic reactions. Any other ideas?
Ok what about growth? Well 5% of the water is used to make new cells.
Well, so then what happens to the other 95% of the water?
It just evaporates. For each molecule of carbon dioxide a tree
takes in, it loses hundreds of water molecules of water. Woah. Can you believe how amazing this is? Trees
create huge negative pressures of 10's of atmospheres, by evaporating water through
nanoscale pores, sucking water up 100m, in a state where it should be boiling but can't
because of the perfect xylem tubes contain no air bubbles, just so that most of it can
evaporate in the process of absorbing a couple molecules of carbon dioxide. I will never look at a tree the same way again. I'd like to say a huge thank you to Hank,
Henry and Professor Poliakoff for making on camera hypotheses. This is an essential part
of the scientific process even if your hypothesis turns out to be wrong.
As Einstein said, "a person who has never made a mistake has never tried anything new."
I've always wondered what it would be like to be on this side of a Veritasium video. Now I'd be surprised if you weren't already
subscribed to these guys, but if you're not, go click on these annotations and check out
their channels. You may just learn something. I'd also like to thank Professor John Sperry
from the University of Utah. He walked me through all of this in an hour-long Skype
conversation so I'm going to put a link to his website in the description.
We're looking at pressures here below atmospheric, is that right?
That's right. Below atmospheric. This is liquid pressure not gas pressure. So it's a common
misconception that oh, you can't have you know negative pressures because there's no
molecules left. You know, the definition of pure vacuum is zero molecules. That's for
a gas, ok. So just to be clear... I think this was one of my big problems in
understanding this. This video would have been impossible without
CGP Grey. When I told him in London about this idea in London...
And I felt like 'pssshhh mind just blown with this whole thing'
He said it was going to be really hard to explain and when he says it's hard to explain
you know things are going to be tough. So thank you for all your input to this script. And thank you for watching. Making this video
has been a real odyssey for me so thank you for joining me on this journey. I really appreciate
all of your comments and if you haven't subscribed to the channel already you can click the annotation
or click the link above and join me on my next scientific adventure. I made a video promising to make a video about
the answer to this. I proposed the problem like a couple months ago, and I was like "subscribe
to the channel and I'll give you the answer next week." Hahaha
Oh, the lies. Drive it at the right frequency.
Oh Yes!!
Success is frightening.
i love trees 🌱🌲🌴
is this shit really going on
r/marijuanaenthusiasts
/r/bonsai ya herd?
Cool info and everything, but about 1/4 of the video is thanking other YT channels and asking for subscriptions. It's more of an advertisement than a documentary.
Edit: this comment is aimed at the reality of YouTube content, not at the OP for posting it=)