How to Setup Auto Inscribers in Applied Energistics 2

for a resource list look in the description listed straight into it so first things first you're gonna want to put three and stripers down on the floor like this and one on top then put a quartz fiber here and a quartz fiber here next take an export bus put it here and put a cable on top and island back put a storage bus alright and take another inscriber and do that then this is extremely important you're gonna rotate all of these just once this way from there you're going to go inside each one and put a inscriber so in this one we'll make it a logic and this one will make it an engineering and then this one a calculation and in this one a silicon alright great so then from there we're gonna get a storage bus and put it all along on these back here we're gonna connect them all up and then we're gonna get another export bus put it here I'm gonna let any cable here and an interface and another ND interface and on the bottom put another cable alright great so that's pretty much the physical part of it done now what we're gonna do is we're going to go over here since this one requires silicon we're going to put a silicon in the storage bus and then since this one is logic we're gonna put a gold ingot in here and since this one is engineering we're gonna put a diamond in there and since this one is speculation we're gonna put a pure service quartz in there alright simple all right okay let's move on this part right here is gonna have a printed silicon and this right here we're gonna have to put a capacity card in there just one and then we're gonna have to put these three printed circuits through there right we're gonna place one more export bus here we're gonna put in this export bus one more capacity card and the three finished processors back there alright so from there if you'd actually be complete Oh No and this Sorge bus right here put one piece of redstone and that should be it the whole thing should be done except for the patterns so then we go over to the pattern terminal and we're going to make three different patterns so put one redstone in here and say we'll start with the logic circuit and one silicon and make sure you have three blank patterns and this will make a logic processor oh shoot gotta change the mode from crafting to processing so yes we'll do that and that will give us an encoded pattern now we just repeat the process from here and we'll say that that oops a diamond engineering alright great and from here we're going to move on and do that in a calculation pattern so make sure they're all correct I want to beat item otherwise it won't work and then we're literally just gonna go over here to this block and the interface and placing these three encoded patterns inside and that should be it yes all right so now what we're gonna do is take another cable and just move it around you can use cable anchors on these to separate them but not really required and that should be it hooked up so now for testing just go over here and it should say craft and let's say we want to make one calculation process there and it should go ahead and start making it there you go that's getting inscribed and yeah there you go and we got it I would recommend putting acceleration cards in each of these makes it a lot faster so there you go that's the entire auto and scrubber setup you don't need an any interface here if you don't have a crafting computer or if you don't want to make it you could just put a chest here and put the required rod resources in there like diamonds gold ingots silicon and redstone and then change this to a import bus but honestly it's better this way because you can craft things from here all right that'll be it thanks guys

Channel: Simplicity Itself

Views: 114,235

Keywords: Applied Energistics 2, ae2, Minecraft, Modded Minecraft, Tutorial, Autocrafting, Automation, Auto Inscribers, Inscribers, ME System

Id: tgnYpYLfk30

Length: 5min 11sec (311 seconds)

Published: Wed Jun 05 2019