How to Set Up Elgato Green Screen XL

In this video we will show you  how to set up Green Screen XL. First step is to move green screen XL to the final  position you wish to use it do not move green   screen XL when it is extended next swivel out the  feet of green screen XL to 90 degrees to support   it when it is fully extended then raise the  support pole from its stored position to make it   completely vertical you may need to pull then once  vertical push it down to lock it into position   grab hold of the handle in the middle of green  screen XL press the blue release button all the   way in and pull up raise the screen up and rest  the handle on top of the pole next to raise the   entire screen release the Locking lever on  the pole and lift up the upper section then   lock the lever to secure it into place and  your green screen XL is now ready to use. If you need to adjust height after setup be  sure to hold onto the upper pole section when   unlocking the lever to prevent it from falling  to retract green screen XL for storage hold   the upper section of pole release the Locking  lever and lower the section down then re-lock   the lever grab hold of the handle lift up from  the pole and carefully lower back down all the   way to the green screen XL case next pull  up on the pole rotate and lower back down   into the holding clamp and finally be sure to  store green screen XL horizontally on its feet if you have any questions leave a  comment down below and don't forget   to like this video And subscribe to us  on Elgato Workshop to learn how to get   the most out of your green screen XL and  other Elgato products thanks for watching

Channel: Elgato Workshop

Views: 11,852

Keywords: Elgato Workshop, Elgato, Workshop

Id: w7gbi7teCrE

Length: 1min 46sec (106 seconds)

Published: Tue Jan 24 2023