Hey guys ChrisFix here And today i'm going to show you how to removspray paint fro And as you can see here, this car is the perfect candidate to teach you this because well, it's been vandalized Somebody got a can of spray paint They held it down and they walked around the entire car every single body panel on this car Has been spray painted and in some spots they got it on there Really thick that's not going to be easy to remove but don't worry I'm going to show you all the tips and tricks on how to remove spray paint like this From the painted surface of your car from the chrome surface from the plastic surface We got it everywhere on this if we walk over here, you can see they got it on the headlights So you're going to learn how to remove it from headlights from the tail lights from the glass Every single surface of this car has been spray painted and by the time we're done with this car You're not even going to know it was spray painted and vandalized. So that's the whole idea. But maybe your car wasn't vandalized Maybe you just drove over some wet paint lines on the road and didn't realize and got paint on the side of the car maybe Your neighbor or you were spray painting something and the wind was blowing and you got overspray on your car? And it peppered it like that whatever the reason you got paint on your car i'm gonna show you how to remove it without damaging the good paint underneath That way you don't have to worry about it. It's going to be a stress-free experience. You got a little paint on there No worries at all Now unfortunately in this case Spray paint isn't the only way this person vandalized this car if we come over here You can see the fuel door does not lock and as you can imagine Take a look in here. You can see there is sugar in the hose that goes to the fuel tank So this is gonna have to get covered in another video how to fix a car that's been vandalized with sugar in the fuel tank I'll show you how to drop the tank the fuel filter the fuel pump all that stuff The fuel lines clean out the injectors that way there's no sugar at all in the tank And then another way they vandalize this car Unfortunately, the interior is messed up too and they just pretty much covered it entirely in mud. Look at this It is a mess in here, but that gives us another opportunity Let me show you the front real quick because the front is also a mess And the opportunity it gives us is how to super clean the interior and this car is not only dirty But it is messy we have candies that have melted inside of here. We have that loose change That's gummy because of all the sugar and stuff that melted on It's just disgusting i'm glad I have gloves on but we want to get this interior in tip top shape So that people would actually want to drive this car now. You're probably asking yourself. Chris Why would you buy a car this messed up that's been vandalized like this? well Let me show you so this car is a 2016 chrysler 200 with 50 000 miles private party value between 10 and 12 000 Trade in value between eight and nine thousand dollars and what I paid isn't even close to that Let me show you so I found this car on the ebay motors app because ebay themselves Challenged me to find a car on their app to fix it and then flip it Sell it on their app for a profit now. I add my own rules It has to be an affordable car which you see the price of this thing and it has to be a healthy profit Not a couple hundred dollars. It has to be sold for at least a thousand dollars profit So let me show you the listing on their app and there are so many good cars on here And this is the one that I ended up finding So the first thing I did was went down to the description and checked out what he wrote He said it's a salvage title and it was totaled due to the vandalism now, I wanted to learn more so ebay now has an Awesome feature where you could actually chat with the seller I asked him if anything else was wrong with the car besides the spray paint and he said no it runs and drives fine And I also asked if the salvage title was just from the spray paint and he said he doesn't know of any accidents it was In it just seems like it's been painted and that's why they totaled it Now on normal cars that aren't salvage ebay has a vehicle protection plan that protects your car up to 100 000 so you don't have to worry about getting the wrong car not getting a title stuff like that Unfortunately because this car is salvaged it doesn't have that protection program But that's also why we're gonna try to get it for so cheap So the auction ended and it didn't hit his five thousand dollar reserve. So I made him a four thousand dollar offer We negotiated back and forth and well, the rest is history. He accepted that offer So that is how I got this car for four thousand dollars one Third of what it's worth when we fixed it up. I can't wait to fix it up. Thank you very much Ebay motors for this challenge and for supporting the video also once we're done fixing this up i'm gonna put this car For sale on ebay motors and whatever it sells for i'm donating that entire thing to charity And ebay motors said they'd match that up to five thousand dollars So we're gonna raise a ton of money for charity teach you how to fix the car I will link this app in the description so you can easily find it It helps me out if you guys download it. It's free consider downloading it And with that let me show you guys how to remove the spray paint from your car Here are all the tools and products that you need to get this job done Nothing crazy here all common stuff that you might have at home If you don't you could easily find it i'll link it all in the description. We're working with simple things So we have two methods we have the mechanical method which is all this stuff right here And then we have the solvent method which is this right here Now with the mechanical method that's anything where you actually have to scrub onto the paint. You're mechanically removing that spray paint So that's car soap. That's clay bar. That's a polish and a wax That's a headlight restoration kit anything like that, but we're not going to start with that We want to start with something less aggressive. Hopefully this works and that is the solvent method We have a light solvent isopropyl alcohol very unlikely to damage the paint. I'll show you all the methods on how to do that So you don't damage your paint and if that doesn't work, we'll move up to something more aggressive, but still pretty safe paint thinner Hopefully that works the paint has been on there for a couple months. It's not fresh Typically this works better when the paint is fresh But either way we will get that paint removed and the first step is to grab your microfiber towel Get your hose or your pressure washer and let's clean up this car actually The first thing we want to do is remove this leather hood cover because well, I don't know why people put these on their cars They don't look that great and it does more harm than good So let's remove this and to do that just remove these clips that hold it to the hood And that's going to allow us to pull the cover off like so and it looks like our car's name is susan Normally, I don't name cars, but has it right there? so it must be and this is why I dislike these car covers because It's so dirty and you can't clean under eventually this would turn to rust and that wouldn't be good All right And now we can move to the actual step one, which is to clean the paintwork up All this dirt and dust and debris that is on here the mud that's on here We don't want to rub that into the paintwork When we're trying to clean off our spray paint because that'll just cause scratches We want to try to get this as clean as possible minus the spray paint and work from there So to do that we're going to be using a pressure washer You could just use a hose and some soapy water, but i'm going to be using a pressure washer You don't want to go much more than 2 300 psi any more than that You could damage the paint and if you do have a pressure washer That's more than that just stand back a little bit further and don't use a narrow nozzle use something that's more spread out In this case i'm using a 25 degree nozzle and you can see how it removes a lot of the dirt On the surface of the paint easily without having to rub it with a towel All right now i'm super excited to show you guys this you see this right here. Look at it compared to that Yes, it's coming off with the power washer. Check this out So i'm making sure the pressure washer isn't damaging the good paint since the nozzle is pretty close But as you can see, the spray paint is coming off, which is a good sign But right now we don't want to focus on removing the paint the first step is to clean the car off So we want to remove all the dirt sitting on the surface of the paint so we don't rub it in and cause damage So once the car is hosed off Next we want to give susan a bubble bath If you don't have a foam cannon, you could use a bucket of soapy water. That works Just fine But I love using foam cannons because it really covers the entire car with a nice thick layer of soap to get the car Extra clean now as we let that sit for a minute. I want to show you guys the microfiber towels that i'm going to be using So this is a regular microfiber towel You could use this to wash the car off, but I prefer A wash mitt when washing the car off especially if it's a dirty car because see all these little fingers the wash mitt has The dirt is gonna get stuck deep in the fingers. That's the whole design that way while you're cleaning the surface of the car You're not rubbing the dirt into the paint causing scratches compare that to a normal microfiber cloth like this without the fingers So any dirt that gets pulled Off the car is gonna stay on the surface of the towel and you're a lot more likely to push that dirt into the paint Which will scratch it. So I definitely recommend using a microfiber wash mitt to prevent scratches so now let's agitate and clean the dirt off the paintwork like so And just to give you an idea look at all the dirt we removed from the surface of this car All that would have been rubbed into the paint and that's exactly why the first thing you do is clean the car off Okay, and finally, we want to give the car one last rinse to remove any soap and any loose dirt and check out How nice this paint shines up with just a little bit of a wash. I know we have our old spray paint on here still Don't worry, we're gonna remove that but more importantly the paint underneath looks amazing. I know it's a newer card But still I was nervous that the paint might be messed up underneath and it isn't so now let's go And try to remove this spray paint and we're going to start with the first method the solvent method It's the least aggressive and especially if you have newer spray paint, it should work I don't know if it's going to work on this older spray paint that's been sitting for a while But we'll give it a try So with the solvent method we're using something like isopropyl alcohol or paint thinner to dissolve the paint The solvent actually goes on here and breaks down the paint almost like sugar dissolves in water except in this case We're trying to dissolve this spray paint. There's a bunch of good solvents out there. I don't recommend using acetone It is pretty good. But the problem is it's almost too good It's very strong if it drips down anywhere if it drips onto plastic or onto your headlights, you will ruin it So it's not worth using this we always want to start with the least aggressive So that's isopropyl alcohol and always put it on the towel Never put it directly on the paint. If you put it directly on the paint, it'll streak down You could damage the good paint underneath So then what you do is you just lightly rub it in and you want the spray paint to absorb the solvent like that So this is definitely absorbing the solvent and as I rub You can see there is a very light tint of brown coming off onto the towel. So it is dissolving it But so slowly it's not worth the effort So now let's move up to the more aggressive paint thinner and before you go and put this on your paint Let's go test this out in an inconspicuous area So we know if the paint turns yellow we can't be using this and a good spot to test that out would be somewhere Down low where you can't normally see easily like this paint right here would be perfect So let's clean off this inconspicuous spot Just like if we were going to remove spray paint So rub it back and forth working the paint thinner into the factory white paint We just want to make sure there are no negative effects from the solvent on the paintwork It would be a shame if we stain the paint yellow or some of the clear coat dissolved or even the white base coat comes Off and then that happens where it's really visible like on a door panel so you can see we actually cleaned off some of that tar from the road and as we let this dry I Do not see any negative effects. We could wait a few more minutes, but it looks like we're good to go All right. Now that we know the paint thinner won't damage the paint. Let's get it on the towel Just wipe it onto the spray paint Let it soak it up and just keep rubbing back and forth with some light pressure Your pressure isn't what's going to remove the paint. It's the solvent dissolving the paint and check this out This is actually working decent. You can see the towel getting all brown and this spray paint is getting removed. That's not bad at all All right, so that actually worked pretty good the paint thinner got all that removed It did take a lot of rubbing and a lot of time and that's just a little section right there We have to do an entire car. So i'm going to see if we could speed this process up using the pressure washer So i'm going to be using the more narrow 15 degree adapter Now when using the pressure washer, it's important. We pay attention to the good paint and make sure we aren't removing it by mistake So far this seems fine It's a 15 degree spray pattern which is more spread out compared to just a narrow jet pattern, but I still want to make sure we don't damage the good paint underneath or all this is for nothing and it's just so Satisfying to see that paint get removed as we hit it with the pressure washer And not bad We did that whole section in about a minute compared to that little section over there, which took forever with just the solvent So the pressure washer worked really well to get the old spray paint off But if you look closely you can still see there is paint still on here and we're gonna have to remove that And to remove that we're gonna use a simple clay bar kit like this So grab a piece of clay that comes with the kit and just break it off like that. That's all you need Then you can grab the supplied detailer You're just going to spray it on there saturate it this is going to act as your lubricant So you don't scratch the paint surface flatten out your clay bar like that and then all you do Is rub with moderate pressure not too hard not too light Go up and down and back and forth And basically what this is doing is it's just pulling dirt and contaminants out of the clear coat So that top layer that we couldn't get with that power washer It's removing but it's also not damaging the paint which is important and after your clay bar gets used like that You can see it collects all the dirt and contaminants in here You don't want to keep rubbing it in because it could cause scratches So what you do is you just flip it over We're going to hit this with some more spray and we're going to continue And we're just going to do this until all those specks are removed And then when your other side is dirty as well What you do is you just knead the clay So you need it like you would need dough and that'll bring up a nice clean surface like that So finish up claying the area that you're working on So all the paint specs are gone Then we'll wipe this down to get a good idea of what we did and look at that. That looks so good It feels nice and smooth which is typical of clay bar, but more importantly all those speckled pieces of paint are gone also If you take a look all the yellowing that was in here is completely gone Our clay bar removed that yellowing contaminant from the surface of that clear coat. It wasn't embedded too deep So that is how easy it is to remove all that contamination with the clay bar and look at that difference. This is right Where we just clay barred it looks really good nice and clean compared to what we need to do next, which is this spot Right here so again Make sure you use the detailing spray as lubricant and then just glide the flattened clay across the paint surface in different directions To pull up the contaminants and as you can see this came out awesome as well There is some light scratching here and some light yellowing, but i'm not too concerned about that Our cleaner wax is going to be able to remove that It'll make it look perfectly white and it'll remove those light scratches now after clay bar and getting all the surface contaminants off All the paint is removed We can move on to our last step which is compounding polishing and waxing but instead of doing all three steps Since our paintwork has been prepped. So well, it's so clean. It's so new i'm just gonna be using a cleaner wax It'll clean up anything that we missed. It'll polish all the scratches out. And then it's a protectant So it puts a coat of wax on there to make it shine up real nice So just get some on your applicator pad and then you're gonna apply a thin layer in small circles with moderate pressure and cover the entire panel Any spots that have visible scratches or yellowing make sure you buff that area a little bit extra to remove it And after that haze is over grab a clean microfiber towel like that And just buff off that cleaner wax like you would any other wax It should come off easily As long as you don't let it completely dry And using the cleaner wax is saving us a bunch of time and effort instead of doing the three different steps of compounding polishing waxing We're able to do one step and get it all done now. Check this out. Look at how amazing this panel came out Look at this shine, that is incredible. I am so stoked about this. Also remember that little spot over here That was all yellow and scratched up completely gone as well the cleaner wax worked perfectly and obviously our spray paint which went here and Down and then up onto this panel completely gone. Well actually not completely gone We want to pay attention to details since they went from one panel to another there is a panel gap here So we want to look inside and you can see There is definitely some spray paint in there. I wouldn't use the power washer here you can But you just have to be super careful not to get the interior soaked. This is the perfect opportunity to use the solvent So that's what we're going to use So just lightly rub the paint thinner Into the spray paint until it's completely removed and then don't forget to add a coat of wax to protect it Beautiful. So with that paint removed it's protected with the wax. We are done in here and check it out Our door panel is completely done. That's one panel down Now let's finish getting all the spray paint off the rest of these panels So the recipe for removing spray paint quickly is to power wash the thick parts of the spray paint off the panel Then grab a clay bar lubricate the panel and glide the clay bar across the paintwork to remove the remainder of the spray paint Like so and look at all the contaminants We pulled out of that clear coat and finally use a cleaner wax and buff it into the paintwork to remove any yellowing and scratches After it hazes over use a towel and buff it off to reveal fresh clean paint. Here's a before and after And again, look at this Transformation man. Oh man. Am I loving this? Look at that? Look at that shine. That's incredible I love this the before and after is insane and we got all the paint off the trunk The trunk is shining like crazy. We got off the quarter panel. We got it off our door here. Look at that You can't even tell that's ever been spray painted or vandalized. We'll touch up that little scratch at the end Not a big deal now. Let's go and remove this up here So here's a before and after same for the front bumper with the chrome and plastic grille before And after and same for the whole driver's side of the car Here's a before and after and finally Here's how the hood look before and after now one thing I want to mention real quick this clay bar wasn't as efficient It wasn't as easy to use On the hood as it was the rest of the car For whatever reason maybe the hood gets a lot hotter because the engine's under it and that spray paint cured to the hood more I don't know what the reason is, but this was a lot more difficult to use it took a lot longer So what I did I went with a more aggressive clay the clay that comes with the kit is a less aggressive one And as I said before we want to go from least aggressive to more aggressive So as this was taking forever, I was like why not? Let me go and try this one out and the key is because this is more aggressive What you want to do is you want to spray more lubricant more often And not press as hard and this worked a lot quicker to get that spray paint off And that's just something to keep in mind You have your regular clay and then you have your more aggressive clay, just in case the regular clay is taking too long I'll link both of these in the description So they're easy for you guys to find now that the hood is spray paint free We have removed about 95 of the spray paint from this car Look at how amazing this car is turning out you would never even know it's been vandalized that is Incredible, I love it. So we're not done yet, though We still have other parts of the car that have been spray painted like this glass right here So let me show you how to remove spray paint from glass And removing paint from glass is probably the easiest thing we're going to be doing today All you need is either a metal razor like this or a plastic razor. I assume most people have metal razors So that's what we're going to use Now you could either use your detailing spray and spray that down or you could grab some soapy water All you need is something to lubricate this because you don't want to have your blade directly on the glass without Lubrication and then you're going to take your straight edge and you want it at an angle about 45 degrees is fine you don't want it perpendicular to the glass like that and you don't want to use the edge of the razor blade because that could cause scratches so keep it at an angle of about 45 degrees and Glide the blade across the surface of the glass like this and you can see how the razor chips away at the paint on the glass very easily and you just do this until All the paint is removed So do this for the entire glass surface to remove the marker and spray paint? Then we could wipe down the surface and that gives you spray paint free glass like that. Here's a before and after And that's all it takes a simple razor blade like this removes the paint from the glass that easily so let's do the rest So lubricate the surface with soapy water glide the razor blade across the surface at a 45 degree angle. Wipe it down And perfect now this process also works for stickers and decals that you might find on glass like this one right here Just work the razor along the glass filleting the sticker off the glass. And once most of the sticker is removed Just go over again to remove any glue and residue like so then you can wipe it down and boom That's what I call clean So that's how you use a razor to clean off the glass to get the spray paint off to get stickers off whatever's on there Just lubricate it. It's nice and easy to use won't cause damage and look at that that looks amazing having clean glass like that Really makes the car pop So now let's head to the front of the car and let me show you how to remove spray paint from the headlights now Unfortunately, the headlights have a lot of spray paint on here and it's really thick and since it's plastic We can't use a solvent. Why not? Let me show you what happens if you use a solvent on a headlight lens Here's an old headlight from my truck. I taped it off so you can see the difference We're gonna put the solvent on this side. I'm just gonna lightly rub it in and already it feels all gummy and it's like sticking Look at that. It's just hazing up. And basically what's happening is the solvent is dissolving the plastic the same way We're dissolving the paint. It's dissolving the plastic And i'm just going to let that sit on there and wait till you see the difference here ready? Let's check this out. And there you go. That's exactly why you don't want to use a solvent. No solvent solvent I think it speaks for itself you ruin the plastic It hazes over and even cracks some of the plastic underneath because basically the solvent is dissolving that plastic So make sure you don't get any solvent on your headlights and that means to remove the paint from the headlights We're starting with our pressure washer And once we remove all the visible paint Let's grab some clay bar and lightly wipe down the plastic lens to remove any small Embedded contaminants so that we could have a crystal clear lens and beautiful these headlights look perfect There's no spray paint left on them, and we didn't have to get aggressive We didn't have to use a polish or a headlight restoration kit Which you could totally use but since these are pretty new they have a good uv coating on them We don't want to mess that up So I spent the extra time even though it took forever. I Spent the extra time And I used just the power washer and then we went over it with the clay bar real quickly Just to get any contaminants off that surface and these are good to go now on the passenger side We're going to do the same exact thing to remove the spray paint Power wash the paint off and then use the clay bar to remove any leftover paint that we might not have gotten off And this side came out awesome as well. We don't have any spray paint left on here Now if your headlights were really bad The spray paint wasn't coming off with just the power washer you had to use a restoration kit You had to use sandpaper a polish whatever it is. Make sure that you use a headlight coating after you're done This is going to protect the headlights so that the uv rays don't turn it yellow right away Your headlights might be crystal clear right now, but you remove that uv protectant layer and in no time It'll turn yellow. But in this case, we just used the pressure washer. Our factory headlight coating is on here So we don't have to use this i'm Just letting you know just in case you do use something more aggressive now with the spray paint removed from the headlights we have officially Removed every single drop of spray paint from this car and that is awesome But unfortunately spraying the car isn't the only way they vandalized it. They also keyed the car Here's a nice long key mark, which we're gonna hide can't make it perfect without re-spraying the whole panel But we are gonna use touch-up paint to hide it and we have a small scratch back here that we need to touch up as well So let's do it and the first step to fixing this scratch is to get some isopropyl alcohol on a rag And just clean it off. We don't want any wax residue any oils any dirt in here We want to be really clean and with this dry since the line is pretty straight What I like to do is I like to grab some tape and just tape off the edge of the scratch Leaving a little bit of white paint in between the scratch and the tape and just make sure you bend The tape around with the scratch. So it looks like it's following the scratch pretty good So it should look just like that next you want to get the correct touch of paint for your car There should be a code on the touch-up paint. That's the paint coat of your car. And in this case that's torch red That's for my corvette. We have pw7 here, which is the correct paint code for this chrysler and once you know You have the correct paint for your car get some on your brush and carefully lay it on Nice and thick you don't have to worry about it running because you have the tape there And you want it thick so it fills the deep scratch Don't worry i'm going to show you how we're going to level this once we're done filling the scratch Now as we let that dry Grab a razor blade like the one we've been using to clean the glass and just get a piece of tape And bend the tape around the blade like that. So it's on the blade now repeat this until the whole blade is covered Except a little section in the middle like that then with the paint dry Let's peel away the tape revealing this horrible tape line But don't worry next grab your razor and at an angle Lightly scrape the touch-up paint working your way down the scratch until you reach the end Now the idea is the tape is protecting the paint surface yet The razor is able to level the touch-up paint to blend it in like that and that's not bad at all Especially for touch-up paint, it's not perfect. But I gotta say it's pretty good. It's definitely a three footer from three feet away You can't even tell that's there if you come closer you can start to see it But for touching it up can't complain at all way better than what it looked now coming up to the front here We have a lot worse of a scratch This is definitely somebody who keyed the car and it went deep it went right into the metal all the way through the base coat So what do you do for this very similar process? but you want to know what i'm going to hold up on this because I said I was going to do a video on how to remove deep scratches like this By touching them up and i'm going to do it i'm going to make a video on it for you guys This is the perfect candidate haven't had a car like this yet And now we do so i'm gonna do that in a video stay tuned for that for now. Look at that That's really good. You can't even see it. So our scratch is fixed Let's go to the back and finish up this car by removing the glue residue left over from the stolen badge And there are a couple different ways that we could remove this but i've been dying to try this out It's a pinstripe remover. It goes right in a drill then just tighten it down like that Get a little bit of soapy water for some lubricant So we don't scratch anything and then you let the drill do all the work I have this drill set at full speed so you can see the adhesive gets removed But yet the tool is soft enough so it doesn't damage the paint So work your way across the adhesive to remove it and do the same exact thing on the other side as well And then just wipe off the remaining residue with the towel just like that Now if you wanted you could totally put a new logo there, but this looks really nice without it, but we are definitely missing something Perfect. Now I don't know about you guys, but I think susan's looking real sharp with that badge removed and I like it. So we're Going to keep it that way And with that we have completely removed all the paint from this car and restored the exterior And just take a look at her the transformation is amazing It's so rewarding to be able to bring a car back to its former glory something as simple as spray paint vandalism totaled this car out and we were able to pick this up for a fraction of What a clean one would cost. So there you go That is how you remove spray paint from your car and i'll be sure to link all the tools and products I used In this video as well as the app that I used to buy this car in the description below That way you could easily find it and get the same results Now time is of the essence once you find spray paint on your car It's important that you get to it as quickly as possible i'd start out with the solvent If the solvent doesn't work efficiently you saw the pressure washer work great and then follow that up with some clay bar And then the cleaner wax and you're gonna get amazing results like this So hopefully the video was helpful If it was remember to give it a thumbs up If you're not a subscriber consider hitting that subscribe button because we have more awesome videos On the way with this car and then at the end of the series one of you guys will own this car And the purchase price will go straight to charity. So stay tuned!
