How to make a modular welding table - Transformers edition #howto #diy #metalworking

How to make a DIY modular welding table? Make plate plate support first. With support straighten the plate and make spot welds. Use square pipes and two bolts to make the base plate flat. Finish the first small module. Do the second module the same way. Tight support to the plate as many times is necessary. After tightening do spot weld every flattened place. After small modules are done prepare to do the main one. Use the same techniques as for the small modules. Go step by step. Do not miss tightening any place. After the supports are done for the main part, do the sides. Before doing sides, check flatness. Be creative in making sides flat! Make a supporting cart for the main part. After each sopot welding check diagonals. They must be the same. Weld the nuts into a square pipe to make a table acceptance part. Assembly acceptance parts. Turin it by 180 degrees and add wheels. Weld the cart for the table. Write us in comments about this topic. Would you like to have DXFs for this and technical drawing? Write us in the comments. If you liked our video, please subscribe! The next stop is showing the modularity of this welding station!

Channel: John Smith Workshop

Views: 262

Keywords: instdiy, diy instructions, how to make, how to, step by step, welding, welding equipment, welding cart, welding table, welding workstation, welding transformers, workshop, metalworking, workshop items, modular, modular welding table

Id: b1pWff4GUxM

Length: 8min 21sec (501 seconds)

Published: Mon Apr 15 2024