How To Make a DIY CNC Metal Lathe with Threading Ability

Spindle Belt Drive Index sensor 3 Phase ACMotor 2.2 kW 1470RPM Drill attachment Tool post SBR16 Rails Fixed Bearing Block Floating Bearing Block 1605 Ballscrew Stepper Motor Coupler Tailstock The frame 50x50x3 Square tube MIG Welder My best friend grinder 120x60x4 c-beam The spindle UCF 207 K11-130 lathe chuck shaft collars for taking axial load The x and z axis z axis Lubrication input x axis 20mm aluminium precision plate 2.2kW AC Motor 400V 3Phase 1470RPM Floating Bearing Ballscrew Nut Fixed bearing block some kind of measurement tool SBR16UU Stepper motor 2.2Nm 1.8mH 4A Limit switches The limit switch The control box EMI Filter VFD Power module CNC Board Transformer Stepper drivers Yerba Mate On off switch Index sensor HTD 5M Belt The tool post The tool post The lathe chuck Machining the chuck mount Chip covers Measurements Z axis ballscrew cover Lubrication inputs Lithium grease Drill bit holder attachment Drill bit holder Bumpers for positioning C16 ER20A - Straight shank collet holder er20 Tailstock Drive belt cover 1mm sheet metal Seems to be safe The spindle encoder The final result Lets test it externa thread cutting M10 10mm long 250rpm 0,03 DOC per pass second attempt on the same thread 0.1mm deeper thread cut Thanks for watching

Channel: GBWM

Views: 1,340,441

Keywords:

Id: vlNlzDfhprY

Length: 66min 28sec (3988 seconds)

Published: Sun Dec 26 2021