How to install a throttle body 2007 Ford Freestyle

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
alright guys back on another video this is the install video you have to seen the install video it will be in the playlists or I will try my best to figure out because I'm new to youtube I will put it in the description alright guys so this is a new one what's his talk hopefully now if I have some through if I had some threadlocker I wouldn't use it but I wasn't hurry to get home because I was tired today and I forgot again yes I needed just remember when you start start a job try to remember everything don't forget everything actually let me hook up the hose first clamp I wish I had more of these clamps but all those parts place didn't have any so I have to use whatever I have I guess that makes sense to you always remember do your bolts start your bolts with your fingers not with your tools with the impact wrench especially nothing automatic because you will strip them trust me you will strip them so you can get them started with your hands you can always tell when you're starting the cross thread because it will get real step on you real quick and you say just put a bigger type now the torque specs on these I have no idea they don't have a torque wrench cutting for the bottom one because I had to pay three hundred and fifty one dollars for this part thanks a lot for I appreciate your hard work you do and your excellent craftsmanship now your stuff now there's a lot better they used to be so good job on that forward so for now I'm just going to do it about fill and always remember when you're tightening bolts do not go from here to here go tighten them we've had the point bolt tighten up the bolt to rip the across from it at an angle you won't have equal pressure make sure your negative does not touch your battery always remember that you have to take a rag put around your negative so it won't touch their battery just do it in tight if I make a mistake and I believe it's ten foot pounds which is pretty much hand tight okay remember to restart your clip make sure this red tack tab is pushed up it locks it in place so it cannot come loose okay all that's done oh that's tightened down make sure your hose is nice and clamp out of the way if you have any hole connectors for your hoses that holds them in place make sure you don't lose those or break those if you do make sure you replace down all right guys that's a new throttle body installed hook the breather back up the pipes and whatever you want to call them wherever you're from down the south we call some stuff some weird stuff so just take it easy honest even though a lot of y'all from up north if you're watching this video have moved down here now nice to have you don't be a douche and naturally I had to get where's it up I asked you get aftermarket clamps which I hate I hate them hate them hate them how you doing boy doing good I'm tired you gonna speak uh-huh make sure everything gets clamped down tight make sure you go I don't lose both anywhere all that good thing and I know going well that this goes right back on the way I have it there we go make sure it fits in here goes make sure that you don't do what I just did I didn't do it this is a mass airflow sensor I remember today at work what it was got mass airflow sensor apparently somebody's broke to broke the green clip off of it little hook get back up and you want to keep your hose I got it they charge by the foot and most places so I got it by the foot so course as you can see on one side I don't need a foot I don't do not need a foot of hose as you can see so what did I do with my cutter for you don't know are you shy he means are you scared to speak yes and yes handy dandy scissors not any dainty notebook just just turn it you get it about where you need it eyeball it always cut more than what you need always cut more than what you need just to make sure you don't want to undercook who you undercut you got a bum a ride from your buddy to the storage nothing fun is it I believe that will work but now that I know it's fit know that fit make sure you put your clamps on always make sure you clamp your hoses because if you do not you're screwed Bubba you are screwed a lot to these on here let's let this hose mic on and we're almost finished guys we're almost finished and I need to get a different size bit to take these rotor body off it's a 5 5/16 socket see would be so much easier if I had a screwdriver but I normally have everything but what I need when I need it ain't ethics ain't that always the case guys is it always the case I prefer the pinch the ones you just paint this dough on there they're a lot quicker and they're a lot easier all right I'll just just remember to make sure your clamps are all tight I'm not going to bore you with me tighten on these clamps that is how it should look when you're done if you get the two-port hated electronic throttle body like I said
Info
Channel: Benjikin
Views: 9,567
Rating: 4.6455698 out of 5
Keywords: How to, 2007, Ford, install
Id: Avwg5Y_Q-_w
Channel Id: undefined
Length: 9min 46sec (586 seconds)
Published: Sun Apr 09 2017
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.