How to heat Pool and Spa

all right we're gonna do a little video on how to turn the heater on for the pool and for the spa so step one we're going to do just the heater we're gonna assume it's after five o'clock because the pump turns off at 5 p.m. so what we would do is first turn the pump on we'd go to the back of the pump we're gonna hit number one their number on the pump turns on close this here and as you can see our valves are in their normal position pool suction and pull return we put some new labels on so to heat just the pool right now the keypad is not functioning on this button but that doesn't matter all we have to do is hit the spa button what determines what your heating is where the valves are at so right now the bowels are in the cool position so basically just adjust the temperature wherever you want it for the pool down I'm assuming you don't want it too hot so say 88 great temperature and once the pool reaches 88 degrees go swim and have fun when you're all done using the heater basically your is going to hit heater off and that is it the valves will remain in that position now to do the spa what we do is once again turn the pump on if it's after 5 o'clock and then we'll turn these valves to spa suction [Music] and Spa return so come this way see it's on spot return wherever the handle is facing is what is on okay then once the valves returned you would come over here and you would hit spa on adjust your temperature for the spa back up and that is it when you're all done you would get heater off turn your valves back always turn the valves back come back over here bow back and then we're going to hit stop and then the start button again that way it resumes its normal schedule

Channel: Danny Benson

Views: 3,169

Rating: 5 out of 5

Keywords:

Id: DFP2j1hy0BU

Length: 2min 27sec (147 seconds)

Published: Wed Feb 05 2020