How to Enter BIOS Change Boot order and secure boot Lenovo Thinkpad E560

[Music] and the Lenova e560 I'm going to show you how to enter the buyer settings to change the boot order or change the secure boot so basically you can do restart restart like this and I have my USB plugged in I supposed to be use this one as the bootable device okay once you restart give it a couple seconds okay here look at the screen keep enter enter press enter enter okay so during the boot you just keep press enter then you can have this screen then you press F1 so from the screen you can choose F1 then you can enter the bi settings here okay so and you can use the arrow key to change the settings so configuration security data time startup okay so if you look at the boot then here you can change the boot boot ufi boot or legy boot most likely when you do USB boot you will use need to be both and uh you can choose Legacy first most Legacy USB booting will be used legacy mode so you choose legacy mode and CSM support yes quick boot enable boot device list enable putot auto lock no okay so and let's see this one okay start up so see this is my USB device so you can use uh change value plus and minus like uh if I change doing this so it will change the order look at this it will change my USB to the upper level okay so enter and you can hit Escape back to this okay and uh other than that uh security secure boot is here so on under security so most likely you need disable the security boot if you using the USB to boot it so that's it after you finish it you press F10 F10 is here and save it okay so then you will be able to put into your USB stick okay thanks for watching please subscribe and comment

Channel: SuperSimple Howto Tutorial in Technology

Views: 552,410

Keywords: Lenovo, Thinkpad, E560, Boot, Order, Sequence, Secure Boot, BIOS

Id: jw_ZNgEn874

Length: 3min 31sec (211 seconds)

Published: Fri Jul 28 2017