How NASA Reinvented The Wheel

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments

cool video on GRC's work on shape memory alloy tires for rovers. Still need to find new materials for being able to survive the lunar night and driving into a PSR.

👍︎︎ 2 👤︎︎ u/minterbartolo 📅︎︎ May 01 2023 đź—«︎ replies
Captions
This metal is about as close to magic as it is possible to find in nature. I just don't get it. It can adjust its arrangement of atoms to return to some predefined shape, but it also converts between mechanical and thermal energy. And it can stretch up to 30 times more than an ordinary metal and still spring back to its original size. I can feel it in my hands shrinking back. Because of these unique properties, it's being used in everything from medical devices to toys, to bulletproof bike tires. And it's allowing NASA to reinvent the wheel for a space exploration. - This is the bones of the tire. - [Derek] The bones of the tire is a slinky. - So basically this is the slinky applied to the rim. - You just wrapped a slinky around a rim. - Yeah. It doesn't get any simpler than that, right? Here is a bicycle that has slinkies inside a polymer, if you look inside there. - [Derek] This tire does not require air pressure to work. The structure and shock absorption are all provided by that metal slinky. - [Jim] So that's like around a hundred psi or what a normal road bike would feel like. - [Derek] Yeah. Which means you should be able to puncture it with no loss of performance. So we're gonna drive it over a bed of nails, but first we'll test a traditional pneumatic tire just to make sure these nails are sharp. (tires popping) (upbeat music) - [Jim] Another puncture, another flat tire. - This one, kind of expected. So now I'm going to put these airless tires to the test driving over the same bed of nails. Here we go. (tires popping) I heard a lot of pops. I must have hit some nails. I don't feel anything different. (upbeat music) Still rides well. I'm gonna get up some speed. - [Jim] That's definitely a nail. - [Derek] I think the nail broke in it, why does it look like- - [Jim] That's what it looks like. - [Derek] Yeah the nail's in the tire. - We're now gonna try to shoot a bullet into the tire and see what happens. 3, 2, 1. (bullet firing) (upbeat music) - There it is. - There it is. - Whoo! - Look at that. (Derek chuckling) - [Derek] Wow. It's a really clean shot straight through. - [Jim] Yep, you can barely even see the mark on the tire. Looks like this one actually hit the- - [Derek] Alloy? - [Jim] Yep, it does to me. - [Derek] Yeah that's what it feels like. - [Jim] You can see we spliced off some of the bullet before we even got to the cardboard. - [Jim] How's the ride? - Yeah no problems. Bulletproof bicycle. This bulletproof bike tire actually comes out of NASA's research into making wheels for space missions. (upbeat music) It is really hard to make good wheels for other planets. I mean a lot of the places we wanna send rovers to, there is no or very low atmospheric pressure. - We can't use rubber pneumatic tires because of the extreme conditions on the moon and Mars there's no confining pressure outside of it. It can basically explode. - [Derek] Besides with temperatures dropping to extreme lows, rubber becomes brittle. - If this were a flagpole, the temperature facing the sun would be 250 degrees Fahrenheit above zero. In the shadow it's 250 degrees below zero. Let's put some rubber on the moon. - 90 is the glass transition temperature. It's when the polymer goes from being flexible to a rigid element. - [Derek] This is what happens when you dip rubber in liquid nitrogen. (rubber exploding) (bright music) (Jim chuckling) That's why you can't send rubber to the moon. This is why almost all the wheels used for exploring other planets have been made of hard metal. - This is actually a spare for the curiosity rover. They're made out of aluminum. A single billet that gets machined down so you don't have to worry about fasteners or welds or anything like that, that could potentially be a failure point. - But with it being so expensive to launch matter into space, the wheels have to be as lightweight as possible. It's lightish, but it's still heavy. - To meet those mass limitations they made the skin 0.7 millimeters thick thin. - Thinner than a credit card. - Yep, these structural members here, which we also call grousers, they're there to give the wheel strength, but also help grab onto obstacles and help grab the soil. The problem is that because this rubber is so large and heavy and the terrain is just so aggressive and nasty, they're actually seeing much higher peak loads kind of focused on areas between these grousers than what was predicted. This is the actual condition of the wheels on Mars right now. And as you can see, we've got big holes and cracks where that skin was. Now the wheel still operates, hasn't immobilized the rover. It's still gonna complete its mission, but it does affect where it can go and how efficient it is. - [Derek] When you apply a force to a material that is known as a stress. And what you're really doing is tugging on all the atoms inside the object, and as a result, their spacing changes a little bit and so the material deforms. For example, if you pull on an object, it will get slightly longer. And the per unit change in length is called strain. Now for most materials under low stresses, strain is directly proportional to the stress applied. And the more you stress it the more it stretches, and the material is elastic. If you remove the stress, the object goes back to its original size. So no atoms have moved around and no bonds have been broken or formed. You've just made them flex when you apply that stress. But if the stress applied exceeds the yield strength of the material, well then the strain is so great that the atoms can't maintain their positions relative to each other. Defects called edge dislocations can move through the material. The atoms are actually rearranging themselves, and so the deformation is not reversible. It's plastic deformation. So the object won't go back to its original shape when the stress is removed. If enough stress is applied, the material can completely fracture. In the worst case scenario, this results in holes like in the Mars rover wheels, which reduce their performance and ultimately could jeopardize the mission. Ordinary metals can withstand a strain of only around 0.3 to 0.8% elastically. Any more than that, and they undergo plastic deformation so they won't return to their original shape. Ultimately, they could even fracture. All right. - [Jim] Yeah and you kinked it too. - Kinked it and stretched it. And that's why every component of a space vehicle is designed never to stretch more than that 0.3 to 0.8%. But that's a significant limitation. There is a different type of wheel that NASA has tried in space, which are those on the Apollo Lunar Roving Vehicle or LVR. - [Jim] That particular structure that they built is something that we call pantograph. All it is is a set of wires that have been over, under, over, under woven. - [Derek] And this on the surface here to get ripped also to strengthen? - It's primarily to ensure that the tire does not sink into the ground. So they did some studies with these tread strips to figure out how much coverage they needed. And so they found out that roughly 50% was enough to keep the tire kind of floating on the surface and still maintain that flexibility. - [Derek] The Lunar Roving Vehicle wheels worked well for the short distance journeys traveled on the moon. I mean the farthest this vehicle ever went was 36 kilometers, but still, these wheels needed to be designed to minimize plastic deformation of the steel mesh. - And so they put this internal structure inside there. We call it a bump stop. So as they hit a bump, and this is deformed, when it hits that it stops the deformation to keep it just below that proportional limit where they would induce plasticity. - [Derek] This wheel was good enough for the short Apollo missions, but for longer journeys a bump stop won't be enough to prevent plastic deformation building up over time. Mesh steel wheels have been tried on earth, but their performance does degrade over time. - This was the Mars steel spring tire we made and drove on that same test rig. And there's no fracture but you see a lot of permanent deformation there. - [Derek] What we need is a material that is strong and durable like steel, but which can endure much more strain without deforming permanently. And that is where this stuff comes in. In 1961, the Naval Ordnance Laboratory was doing experiments with different alloys involving nickel and titanium. A sample that had been repeatedly worked, heated and cooled was shown to one of the associate technical directors who just happened to be a pipe smoker. So he decided to see what the sample would do if he applied a bit of heat from his lighter. And when he did that, he found that the material changed shape. This shocked everyone and led to more investigations into the material. Which became known as nitinol, for its components nickel and titanium, and for the Naval Ordinance laboratory where it was discovered. So why did nitinol change shape? Well it's really because the alloy can undergo a phase change in the solid state. In heated nitinol the atoms are arranged in a cubic lattice arrangement, and this phase is known as austenite. But upon cooling, the atoms ease into a form known as twinned martensite. It's a messier lower symmetry arrangement of the atoms. And in this phase, you can apply stress to the material and deform it. But unlike in an ordinary metal, this deformation is not causing bonds between atoms to break and edge dislocations moving throughout the material. Now in this case, the crystal structure is changing once again to a detwinned form of martensite. And now when you heat it back up, the material goes from martensite back to being austenite. Which means all the atoms go back to their original locations, and so the material returns to its original shape. - We can basically set this shape as the parent known memory shape. That's why we call it shape memory. I can stretch this out. If I cooled it down I could stretch it out even more, but as soon as I heat it back up, it'll remember that original parent shape. - [Derek] And that's why nitinol is considered a shape memory alloy. The shape is set at high temperature when the material is in the austenite phase. Then as the material is cooled down, it undergoes a phase transition into twinned martensite. If stress is now applied to the material in this phase, it can be extensively deformed by changing the crystal structure into detwinned martensite. When the stress is released most of that deformation remains. But when the sample is heated, the atoms return to the austenite phase, which returns the material to its original shape. (Derek laughing) It's like you're barely in the water. - No. - And it just- - It's as fast as you can conduct heat to it or get heat away from it. - [Derek] Whoa, whoa. I mean that's cool. This is the property of nitinol that most people are aware of, and one that makes it useful for a lot of applications. So that's a stint. - They slightly cool these down right below to martensite, and then they crush it or elongate it. So you can see it gets real thin. And then they put in a catheter and that catheter goes through the body to the place where they wanna deploy the stent. And then upon deploying it, it bounces right back. Increasing that outer diameter and opening that artery. Nitinol is absolutely perfect for that. - [Derek] Shape memory alloys can actually generate significant forces when they're heated, which means they can also be used as actuators. - You're gonna see a huge amount of force and stress build up in the wire, which we can see here with how much it's pulling. - [Derek] Six pounds, seven, you can really see it contracting there. 13, 15, 16, 17, 20 pounds. Oh it's lifting it. That's about 90 newtons of force. Scientists have even used shape memory alloys to fracture a rock. Shape memory alloys are being investigated for use in aviation. I made a video before about vortex generators. Which are these little fins that stick up outta the wing of a plane to trip the airflow into turbulence. This is important for takeoff and landing to keep the flow attached to the wings so you don't stall. - But when you're up at cruise and you don't need those vortices being generated, you want these to stow because they're a drag penalty. As the plane just climbs from takeoff to cruise we go from some temperature on the ground to something close to -50, -60 C at cruise. The alloy is designed in between those so that we can just take advantage of the ambient temperature change that happens in the environment. When we cool this one down, no controller, no operator, it autonomously stays flat. - [Derek] The temperature at which the material transitions between austenite and martensite can be tuned to be anywhere between -150 to -350 degrees Celsius. This is done by changing the ratio of the elements and using different heat treatments. - [Santo] And then as that would heat back up coming into landing, it goes right back up. - [Derek] This principle has been extended to operate the main flaps on an aircraft. Now the heating and cooling is not passive, but controlled by a heating element. - So we've done demonstrations where you have a 737 aircraft and no hydraulic actuators on the wing box. All we have is a shuttle mechanism that's driven by two tubes in nitinol and we've driven those air arms and flap elements on the wing box of a 737 in flight, 60 degrees flap angle down, 30 degrees flap angle up just by heating and cooling two tubes of nitinol, replaces all the hydraulics. - [Derek] The shape memory effect is the main thing people know about materials like nitinol, but they have another unique property which makes them ideal for making durable wheels. - And you're just gonna take it and you're gonna loop it a couple times around your hand like that, and you're just gonna pull on that wire and feel 6 to 8% strain in a piece of metal. - Oh that's really weird. - [Santo] That's 6 to 8% strain, which you can't do in other wires, right? - But what's weird about it is that it feels a little crunchy. - [Santo] 'Cause you're feeling all of the reorientation. - [Derek] Oh so weird. - [Santo] So cool though, right? - [Derek] Yes, very cool. (nitinol pinging) Can you hear that? - [Emily] Yep. - [Derek] How weird is that? - [Santo] That pinging is 20. - [Derek] Shape memory alloys can stretch up to 8% of their length and still spring back to their original size. This property is known as super elasticity or pseudo elasticity, but they're kind of misnomers because the material is not actually operating in its elastic regime. What's actually happening is that this nitinol is in the austenite phase. It's transition temperature is lower than room temperature. But by applying a stress, even with no temperature change, you can force the crystal structure to change from austenite into detwinned martensite. And this rearrangement allows the nitinol to deform by that 8% and still it'll snap back to its original configuration once the stress is removed and the atoms return to the austenite phase. (nitinol pinging) That sound you're hearing is the material undergoing a stress-induced phase change in the solid state. If you wanna think about it on a stress strain curve. Now this transformation is occurring entirely above the martensite transition temperature. So the material starts off in the austenite phase, and then the applied stress is what induces the phase change from austenite to detwinned martensite. And when that stress is removed, the atoms spring back to the austenite phase, and so the material goes back to its original size and shape. - If this were a normal tube I would bend it to here and it would plasticize. If it was a brass tube, which you know has a plastic buckling mode, it would go like this and it would actually buckle a wall. I would never take my hands and bend them like this and have it completely returned to shape. - [Derek] At the bend the nitinol is transforming from austenite to martensite and back. - When we go from the higher symmetry phase, the austenite to the lower symmetry daughter phase, which one is it? Exothermic or endothermic? - I feel like that should be exothermic. - Good job science guy. (Derek and Santo laughing) If you were to put your hand around this tube, you'll actually feel the heat energy, the enthalpy of that transformation evolving as heat. You ready? - Yeah. Oh yeah that's real hot. - Ooh, ooh, ooh. That actually is like burning. Like I can't keep my hands on it. - [Santo] No keep your hand on it, it won't burn. - Geez that's hot. - When the stress is removed and the material goes back to being austenite, that phase change is endothermic. It absorbs heat. Woo. (Derek chuckling) Right? It's like you could use that for a refrigerator. - So it's exactly right. So another area where these materials are being applied is in a field called elastocalorics where we use this transformation to do things equivalent to heat pumping. - Like heat pumping. I wanna shoot this with our thermal camera. We got a FLIR with us. How's that? - This dissipation potential can act a little bit like the dissipation in the shock absorber, right? So the tire itself could actually perform some of that dissipation potential on its own. - It almost acts as a damper, right? To get rid of that energy loss. So then your tire actually has a potential of becoming a complete suspension system. - Hmm. - Which obviously really simplifies building vehicles for space. The original tire, when I put a load on it, okay you can see I'm only transferring a load from the footprint to this little section of the tire, all right? By tying this bump stop element to here, when I go through a footprint, you can see now I'm transferring load 360 degrees around the tire, right? By doing that, I have now increased my load carrying capacity significantly without adding any more mass. - [Derek] So to make a tire out of shape memory alloy, they weave nitinol springs together into a mesh. It's a pretty tedious and time consuming process. - [Engineer] So you're gonna take it like so. - [Derek] Yep. - [Engineer] You're gonna grab both ends? - [Derek] No. - [Engineer] And I'll take it. - [Derek] No you're not. - [Engineer] Take it. - [Derek] Yep. - [Engineer] And screw it in. - Oh my goodness. Are you kidding me? Is this what you do every day? - [Engineer] 684 Times. - [Derek] 684 times- - [Engineer] Per tire. - [Derek] But will these wheels work on rovers on the moon and Mars? Will they test the wheels extensively on a rotating carousel of different terrain types from sand to small rocks to bigger rocks? - So the terrain endurance rig basically consists of a circular carousel that is independently driven. The wheel tire assembly is also independently driven. So we can create a force slip condition, so we can drive with zero slip. (rover wheel whirring) And this is about how slow a Mars rover would be traveling. Average speed is about 6.7 centimeters per second. That's a nominal speed, they don't go too fast. - All right, I'm gonna go walk on simulated moon regular. It looks like beach and it feels like beach. This side is meant to simulate the surface of the moon, and this side is meant to be the surface of Mars. It is very sinky sand. The wheel is rolling along, rolling along, it's a rock. Am I pushing into it or do I wanna get it on top? - [Santo] I'd say get on top and just put all your body weight onto it. - That's basically my full weight on it. The shape memory alloy is strong enough to support the weight of a vehicle or vehicle and crew, but it's also incredibly flexible. So it can deform up to 8% without being permanently damaged. And that's what's needed for long space missions. - [Santo] So that's a pretty good amount of deformation, right? - [Derek] That's a great amount of deformation. - [Santo] And still not beyond 8%. - It's so gooey. Just walking back to the car after the beach. Tricky for a rover, right? But these tires won't just be for space. They're also looking at terrestrial applications. - Most aircraft, the tires on those aircraft, they have to be pressurized to really, really high pressurization, 300-400 psi. Not the conventional 30-60 psi you do in a car or truck tire, right? We have issues where at those huge pressurization they can explode. The other construct is maintenance, right? So if I'm a pneumatic tire and I'm relying on that pneumatics for the performance of the system, I have to always be checking the air pressure to make sure that I'm at the right inflation pressure so that I'm not burning too much fuel, or I'm not at a place where I could potentially pop a tire because of the loads. By going to a structural system that doesn't rely on air and is designed specifically for the application. All of those things go away. - They've tested one on a Jeep. Since it doesn't rely on pressurized air for support, you just can't get a flat tire. Plus it can never be under inflated, which significantly improves fuel economy. With a metal that works like magic, you can make airless tires that will take us off road, on road, into the air and across other worlds. (fire swooshing) (logo plopping) NASA's nitinol tires are designed to last the entire lifetime of a rover mission, even on a rough terrain of Mars. But here on earth, few products last a lifetime. From bike tires to phones to toothbrushes, pretty much everything wears out. But with Henson Shaving, the sponsor of this video, you may never need to buy another razor again in your life. Henson actually came out of an aerospace machine shop that built parts for the Mars rover and the ISS. So they are experts in precise high quality work. If the temperature to manufacture their rover parts changed as little as one degree, they had to scrap the entire piece. And that sort of precision is overlooked by most razor manufacturers. In a typical razor, the blades flex and bend when they make contact with the skin. And this movement causes micro cuts leading to skin irritation and razor bumps. To many people, this is just an inevitable part of shaving, but it doesn't need to be. You want advice about a good razor? Trust a guy with a beard. This is Henson's AL 13 razor. It's so precise that the blade extends past the shave plane by exactly 0.0013 inches. That's less than the width of a human hair. The blade is also securely fastened at exactly 30 degrees, leaving almost zero blade flex for a smoother and cleaner shave. This razor is designed to last a lifetime, and it's standard double-edged blades cost only around 10 cents each. Which means the cost of ownership for an AL 13 razor ends up lower than most cartridge or electric razors after only two years. And besides price considerations, having one razor for the rest of your life is both more convenient and better for the planet. So if you want one aerospace quality razor to last the rest of your life, go to hensonshaving.com/veritasium and enter code veritasium for 100 free blades with a purchase of a razor. That's two to four years worth of blades on me. Make sure to add both the razor and the blades to your cart for the code to take effect. So I wanna thank Henson Shaving for sponsoring this video, and I wanna thank you for watching.
Info
Channel: Veritasium
Views: 8,534,917
Rating: undefined out of 5
Keywords: veritasium, science, physics
Id: vSNtifE0Z2Q
Channel Id: undefined
Length: 25min 34sec (1534 seconds)
Published: Sat Apr 29 2023
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.