The importance of electricity in our modern
world can hardly be overstated. What was a luxury a hundred years ago is now
a critical component to the safety, prosperity, and well-being of nearly everyone. And yet, electricity is so unlike our other
physical necessities. We can’t hold it in our hand; We can’t
see it directly; and we usually only have a vague understanding of where it comes from. Hey I’m Grady, and this is Practical Engineering. On today’s episode, we’re talking about
power generation. This video is sponsored by Hellofresh, America’s
most popular meal kit. More on that later. Generation is the first step electricity takes
on its journey through the power grid, the gigantic machine that delivers energy to millions
of people day in and day out. We talked about the power grid in a previous
video, but there’s one crucial point that’s worth repeating: it is a real-time energy
delivery system. Electricity moves at nearly the speed of light,
and current availability of large-scale energy storage is negligible. That means that power is generated, transported,
supplied, and used all in the exact same moment. The energy coursing through the wires of your
home or office was a ray of sunshine on a solar panel, an atom of Uranium, or most likely,
a bit of coal or natural gas in a steam boiler only milliseconds ago. Because of the laws of thermodynamics, all
our electricity starts as some other kind of energy, which means all of our ways to
generate electricity are just fancy ways of converting one type of energy to another. And in most cases, the type of energy being
converted to electricity is heat. Take a look at any of the various pie charts
showing the breakdown of global energy production. You’ll see that the vast majority of methods
we use to generate power are essentially just different ways of getting water really hot. Many thermal power plants (as they’re called)
use fossil fuels like coal or natural gas in a furnace to generate steam. These types of plants have the obvious disadvantage
of producing tremendous amounts of carbon dioxide as a by-product, a greenhouse gas
that’s largely responsible for the ongoing rise in the average temperature of the Earth's
climate, also known as global warming. In fact, electricity production makes up about
a third of total greenhouse gas emissions. Luckily, there are other ways to generate
large quantities of steam that don’t rely on fossil fuels. Some plants use the fission of radioactive
elements in a nuclear reactor as a source of heat. Some parts of the world can use geothermal
energy, heat from inside the earth’s crust. We can even use arrays of mirrors to concentrate
sunlight and create enough heat to run a boiler. But beyond that first step, thermal power
stations are pretty much all the same. Once the steam is created, it passes through
a turbine which converts the thermal energy into rotational energy. The shaft of the turbine is coupled to a rotor
(that’s the part that rotates) of an AC generator that spins a set of magnets. The stator (that’s the part that’s stationary)
has a set of coils of wire called windings. As the magnets on the rotor pass each winding,
they generate a voltage across each coil. In most places in the world, the number of
coils in the stator is three, because our grid is built for three-phase, alternating
current.The benefit of having the current alternate directions is that it makes it easy
to step up or down the voltage using a dead simple device called a transformer. The benefit of generating power in three individual
phases is getting a fairly smooth supply of electricity that overlaps so there’s never
a moment when all phases are zero. A three-phase supply can also be carry three
times as much power on three wires as a single-phase supply can carry on two. This is why steam turbine generators almost
always have coils grouped in three. But, steam isn’t the only way to spin a
turbine. Hydroelectricity uses flowing water, and wind
energy production has seen massive growth in the past 10 years. The other renewable source of electricity
that is seeing explosive growth is solar photovoltaic or PV. The cost of solar cells which convert light
directly into electricity has plummeted, making it feasible even for individual homeowners
and businesses to install them on rooftops and supply some or all of their own power
needs. Large-scale solar farms are also popping up
in sunny climates to meet the growing demand for renewable electricity. Being able to power the grid directly from
sunlight without harmful by-products is awesome, but it does come at a cost. Besides the obvious disadvantage of only working
during daylight hours, solar PV has another disadvantage on the grid: it doesn’t have
any inertia. One of the biggest benefits of connecting
lots of power plants together is the tendency of power to remain in motion on the grid,
even during localized faults and disturbances. This inertia keeps our electricity stable
and reliable. But electricity doesn’t have inertia on
its own. You can’t give the electrons a kick and
hope they continue down the wires without any help. The inertia comes from the physical rotation
of all those massive interconnected generators. You can imagine the power grid as a train
going up a hill. The locomotives work together to carry the
load. To maintain speed, the throttle or number
of locomotives needs to be adjusted to match the load of the train (which represents the
total power demand that is constantly changing throughout the day). The power grid works in a very similar way. Electrical demand is felt immediately by all
the connected generators. Each additional demand causes a little more
load on the every generator together, slowing the rotation by just a tiny amount and thus
decreasing the frequency of the alternating current. Similarly, if electricity generation exceeds
the demand, the generators will speed up. You can see this demonstrated in a typical
brushless motor which is wired exactly like a three-phase generator. Under no load, the motor spins freely. But, if I short the contacts together to simulate
a high electrical load, it takes much more energy to turn. Power consumers turn on and off electrical
devices at will, with no notification to the utilities at all. So, to avoid fluctuations in frequency, generation
has to be constantly adjusted up or down to match electrical demands on the grid. This process is called load following. As demand on the grid increases or decreases
throughout the day, grid operators dispatch generation capacity to match it. Going back to our analogy, the speed of our
train represents the grid frequency, 50 or 60 hertz depending on where you live. Every locomotive and every train car is designed
to travel at exactly the same speed, and the stability of the entire system depends on
perfect synchrony. If one part of the train starts moving faster
or slower than the rest of the cars, things go haywire in a hurry. This is why inertia is so important. If any problem occurs, for example if one
of the locomotives dies, the train has enough inertia to keep things moving while the problem
can be addressed. It’s also why grid operators maintain spinning
reserves, generators that are ready to connect to the grid at a moment’s notice. And before a generator can be connected to
the rest of the grid, it needs to be synchronized as well. That means its frequency, phase, and voltage
need to be matched with grid power by adjusting the speed and excitation of the electromagnets
in the rotor. A special instrument called a synchroscope
helps with this process. Once the synchroscope gives the all clear,
plant operators can close the breaker to connect to the grid. This is a simplification of load following
and generator dispatch, but it highlights one of the key differences between wind and
solar and the rest of our generation capacity. If we want our lights to turn on right when
we flip the switch, we have to understand that the grid operators need the same thing:
the expectation that generation capacity will be available on demand. Reliability is the overarching purpose of
having an interconnected power grid in the first place, and incorporating unreliable
sources of power - like wind that depends on weather and solar that’s only available
during half the day - is one of the biggest challenges we face with electrical infrastructure. Because of global warming, transitioning to
renewable sources of electricity is one of the most important challenges of our lifetime,
and I think that overcoming it starts with all of us being interested, informed, and
excited about understanding where our power comes from. This video’s sponsored by Hello Fresh, America’s
number one meal kit. My wife and I absolutely love these kits. I don’t know exactly what it is, but something
about not having to plan the meals or do the shopping completely changes the activity of
cooking dinner into this really fun thing that I look forward to all day. Hellofresh comes right to your doorstep with
fresh, pre-measured ingredients and easy-to-follow recipe cards. We usually get the vegetarian meals but they
have recipes tailored to all kinds of tastes. You can switch options or pause deliveries
whenever you want, and right now the price starts at $6.99 per serving, which is pretty
reasonable for a date night. And you know what’s even more reasonable? The 8 free meals that HelloFresh is giving
to fans of the channel who visit HelloFresh.com and enter practical80. That’s $80 off your first month of HelloFresh. Just click the link in the description and
use code Practical80 at checkout. Thank you for watching, and let me know what
you think!
This was a really enjoyable video
Umm 3:40 pretty sure 3-phase power provides √3 x more power than single-phase does at the same amperage, not 3x
Can somebody answer some questions for me?
Really enjoyed the video.
That guy looks like a combination of a 25 year old and a 75 year old and it's really strange.
I've always had this doubt. In a generator when the eletrical power rises (demand) doesn't the frequency in the turbine go down as well as the speed? Because we have to match mechanical power with eletrical power in a syncronous generator, so if the demand goes up the turbine as to slow down to generate cinetic energy so the mechanical energy goes up as well.
The dude in the video said that turbines would speed up if demand goes up.. Is it the same as slowing down? Meaning what matters is the cinetic energy generated.
So this guy is a total sellout?