- [Jared] In this video, I want to show you how they launched the space shuttle. We'll look at all the
preparation beforehand, then the details of the launch pad, and then their 8 1/2-minute
journey into space. (intense music) This video was made possible by NordVPN. I'll show you more about
this after the video. Sadly, the space shuttle is retired. It no longer flies. However, I think it's still
really important to learn about. After all, some of this technology is still being used for space programs. In preparation for this
video, I read a few books. One of them was called "Riding Rockets," and it was written by three-time
astronaut Mike Mullane. He does a good job of capturing what it was like to ride
on the space shuttle. I reached out to Mike,
and he was really helpful. He made a lot of good suggestions for what to include in this video. Though before we get
too far, let's review. This is the Orbiter Vehicle, the part that looks like an airplane and carries the astronauts
and payloads into space. I have a video all about the
inside of the Orbiter Vehicle. I'll put a link in the video
description down below. It takes so much fuel to get into space that we need a really big gas tank. That's what the orange
external tank is for. It provides the fuel for the three Space Shuttle Main Engines. Even this isn't enough
to launch us into space. We need two extra rockets on each side. These are called the Solid
Rocket Boosters or SRBs. It takes a lot of work to
get all of these pieces ready for the launch. There were two launch sites
for the space shuttle, Kennedy Space Center in Florida and Vandenberg Air Force
Base in California. Shuttle launches from the
Vandenberg site ended up being canceled, and as a result, all 135 shuttle missions were
launched out of Florida. So let's take a closer look at Kennedy Space Center in Florida. It has two launch pads, 39A and 39B. Shuttle missions were launched
from both of these pads. There's a few buildings way over here, about five kilometers away from the pads. The large one here is the
Vehicle Assembly Building or VAB. It's as tall as a 38-story building. This is where they would
assemble the space shuttle in preparation for a launch. Next to it is the Launch Control Center. Notice how it's positioned with a good view of both launchpads. This building is called the
Orbiter Processing Facility, or OPF, and actually there
were three OPF buildings. It's where the orbiter was
serviced in between missions. Over here is the Shuttle Landing Facility. This is where a mission
ends for the space shuttle. But they didn't always land here. Sometimes due to weather
or other circumstances, the shuttle would land in California at Edwards Air Force Base. When this happened, we need
to get the Orbiter Vehicle all the way back to Florida, and the shuttle can't
really take off again and fly like an airplane. It wasn't built for that. So here's what happened. The Orbiter Vehicle was taken
to the Mate-Demate Device, or MDD, which would lift up the shuttle and then load it on the
back of a special airplane called the Shuttle Carrier Aircraft. It was then flown across the United States to get back to Kennedy
Space Center in Florida. It was then taken to one of the OPFs. Once inside, the engineers
would literally crawl all over it to fix or replace
many of the shuttle components to make sure that it's safe to fly for the next shuttle mission. This process can take
several months to complete. This is part of the reason why the space shuttle was so expensive. Meanwhile, work starts
over here at the VAB. We start with the solid rocket boosters, which are assembled piece by piece. On the inside is the solid rocket fuel. Once ignition starts at liftoff,
it cannot be turned off. Now it's time to lift the
external tank into place. Inside, there are two smaller tanks. One for liquid hydrogen,
and one for liquid oxygen. These tanks will remain empty until just a few hours before the launch. Now at room temperature, hydrogen
and oxygen are both gases which take up an enormous amount of space. But if we put them at
extremely cold temperatures, they will turn into liquids, and we can put a lot more
fuel inside of the tanks. The liquids from each tank
will flow through pipes down to where it will
connect to the orbiter. This side is for the liquid hydrogen. And this side is for the liquid oxygen. Once the orbiter was ready,
it was then transferred from the OPF to the VAB. This was referred to as a Rollover. (bright orchestral music) The orbiter was then hooked up to a crane and then carefully lifted up, moved over to the high bay, and then mounted to the
side of the external tank. The fuel and electrical
connections are attached to the bottom of the orbiter. There is also another attachment
point up towards the top. Once this is all ready to go, we need to move it to
one of the launch pads, which are more than five kilometers away. This is referred to as the Rollout. (gentle orchestral music) The weight of the entire shuttle stack is supported at the base
by eight Hold-Down Posts, four on each of the SRBs. It's then secured in place
by the Hold-Down Bolts. At the moment of liftoff,
these will detonate to free the shuttle. The platform it's on is called
the Mobile Launch Platform. Underneath is the Crawler-Transporter, which moves everything at just under 1 1/2 kilometers per hour. It takes many hours to get all the way to one of the two launch pads. (grandiose orchestral music) Then it's up the ramp
and slowly into position. The platform is put down on supports. And the crawler goes back down the ramp. (gentle orchestral music) The Mobile Launch Platform has large holes for the rocket flames. The three main engine flames
will go through this hole. And the flames from the two SRBs will go through these two holes. Below the pad is the Flame Trench. During the liftoff, the flames will be deflected to each side. The structure next to the
shuttle stack has two main parts, the Fixed Service Structure,
which doesn't move, and the Rotating Service Structure, which can pivot around to completely enclose the space shuttle. (bright orchestral music) Sometimes the payloads were loaded here in the vertical position, and other times they
were loaded before this, when the orbiter was on
the ground at the OPF. The Fixed Service Structure
has a Lightning Mast on top, and then three service arms. Two of them are vent
arms, which will collect excess hydrogen and oxygen
from the external tank. This is the Gaseous Hydrogen Vent Arm with the Ground Umbilical
Carrier Plate at the very end. At the top is the Gaseous Oxygen Vent Arm. Because the fuels are so cold, the Beanie Cap is really important to prevent ice buildup at the very top. The third arm is called
the Orbiter Access Arm. At the end of it is the White Room. This is how the astronauts
get on board the orbiter in preparation for a launch. Down here are the two Tail Service Masts. They have connections to
each side of the orbiter. On the day of the launch,
this is where the fuel will come in to fill the
orange external tank. If there is an emergency on the launchpad and the astronauts need
to get away in a hurry, they will come over here to
the Emergency Egress System. It has several baskets
that can quickly carry them far away from the launch tower. Each basket can hold three people. One more feature of the
Mobile Launch Platform is the Sound Suppression System. Beginning at just a few
seconds before launch, water will start pouring out
from a few different places. This will limit the sound shockwaves from bouncing back up and damaging parts of the space shuttle as
it leaves the ground. The water is stored in this
large tower on the launchpad. So let's see how this works
on the day of the launch. There are many things that
have to happen in order. I can't cover them all in this video, but let me show you some of the main ones. At T-5 hours and 35
minutes before the launch, fuel begins loading
into the external tank. The fuel comes from the
white spherical tanks on the edges of the launchpad. Remember that the SRBs already have their solid fuel inside of them. At T-3 hours, the astronauts
leave for the launchpad and begin to enter the Orbiter Vehicle. Since the shuttle is
vertical on the launchpad, all of the seats are in
the laid back position. Most missions had seven astronauts, three in the mid deck, and
four in the flight deck. There are no windows on the mid deck, so some of the astronauts won't be able to enjoy the view on the way up. (bright orchestral music) There's a lot of excitement coming up to the moment of liftoff. However, if there are any problems such as mechanical failures or even bad weather, than the launch will be delayed or even canceled until another day. This is called a Launch
Scrub, and it can happen all the way up until just a
few seconds before liftoff. At T-7 minutes and 30 seconds, the Orbiter Access Arm
is slowly retracted. If there is an emergency, they can quickly bring it back into place. A T-3 minutes and 45 seconds, the main engine gimbal test to make sure that it's working correctly. T-2 minutes and 55 seconds,
the Beanie Cap is lifted and the Gaseous Oxygen
Vent Arm is retracted. At T-10 seconds, activate
the Hydrogen Burn Off System, and no, this does not
actually start the engines. That happens up here inside
of the combustion chamber. What these sparks do is
ignite any excess hydrogen. This hydrogen can cause
an unexpected explosion at launch if it isn't taken care of. At T-6.6 seconds, the
three main engines ignite. All three of them must work correctly, or they will shut down
and abort the launch. At the moment of liftoff, many
things happen simultaneously. The Gaseous Hydrogen Vent Arm is retracted from the external tank. The two connections at the
Tail Surface Mass will retract. The eight Hold-Down Bolts will detonate, which frees the shuttle, and then both SRBs ignite. (grandiose orchestral music) For their journey into space, the shuttle is mostly
flown by the autopilot. Of course, the astronauts
can still take over if they need to. Shortly after clearing the tower, they do what's called the Roll Program to get the shuttle so that it's heads down for most of the ascent into space. This reduces the aerodynamic
stress on the wings. It will also allow the
astronauts to see the curve of the Earth as they ascended to space. Now, as we keep gaining
more and more speed, the air in the atmosphere
will create pressure on the front of the spacecraft. Then as we get higher, the
air starts to thin out. They use the term Max-Q
to refer to the time when the aerodynamic pressure
will be at its highest. During Max-Q, the main
engines will be throttled down so we don't accelerate too quickly. But then shortly after, we can
throttle them back up again. A little more than two
minutes after liftoff, the two SRBs have done their job. They are detached, and
then small rocket motors on the bottom and on the
top fire on each booster to ensure that they are
separated from the vehicle. The SRBs fall back down to the Earth where they will parachute in for a soft landing in the ocean. They will be recovered by boat, and then refurbished for
a future shuttle mission. Now the three main
engines are on their own. As we get higher, more and more fuel will be used up from the external tank. This means that the shuttle
will keep getting lighter. We have to keep throttling
down the engines or we'll accelerate too quickly. The maximum amount of acceleration
we want the astronauts to feel is 3 Gs, or three
times the force of gravity pushing them into their seats. At about eight minutes and 30 seconds, we have Main Engine Cutoff, or MECO. This must happen before the tanks run dry so that the engines aren't damaged. The external tank is now detached. We're not an orbit yet, so
the tank will head back down to Earth and burn up in the atmosphere. (gentle music) The two doors on the bottom
side of the shuttle will close now that the external tank is gone. If they didn't close, we would
have gaps in the heat shield at the end of a mission,
which would not be so good. At this point, the orbiter vehicle is on the same path as the external tank. We're not quite going fast enough to stay in orbit around the Earth. Remember that the
external tank had the fuel for the three Space Shuttle Main Engines, so we can't really use these anymore. Instead, we'll use the
two OMS Rocket Motors. These each carry their own
fuel inside of the pod here. (gentle music) This gives us that last push
into orbit around the Earth. Now it's traveling at
28,000 kilometers per hour, many times faster than
the speed of a bullet. Now it's time to do some science, release a satellite, or dock to the
International Space Station. It takes a lot of time
to make these videos. I think I've spent most of my summer learning about the space shuttle. I do this for a living,
so I'm really grateful for the sponsor for this
video, which is NordVPN. This is an app that encrypts
your internet traffic, which means increased privacy and security when you are online. This means your browsing
history is kept private from any unwanted prying eyes. But there's a lot more
that NordVPN can do. It can also protect you
when you accidentally click on a link to a malicious website. So that's really handy. The app is super easy to use. Just open it up and click on the Quick Connect
button, and that's it. Super fast servers so
you won't even notice a difference when you're online. And if you need to, you can even connect to a server in a different country. Now, why would you wanna do this? Sometimes shows aren't available in the country that you're in. NordVPN can easily solve this problem. The app is available on whatever device you happen to be using,
and you can connect up to six devices simultaneously. Right now you can get
68% off a two-year plan, only 3.71 per month,
plus if you use my link, you can get an additional month for free. That's NordVPN.com/JaredOwen. (gentle music)
Apart from that one time.... and that other time...
I am very glad this thing is not putting lives at risk anymore.
Also, despite what the video states. You do not "cool" oxygen and hydrogen to make it liquid. They compress it.
There's a Haynes manual for the shuttle?