homemade Honey extractor

okay here we go to show our homemade honey extractor we have a 31 gallon galvanized can we have brackets here to hold the lids on a notch made this is the bottom bearing spins here got some legs to stand it up goes in automatically holds it so forth needs to be in there now we've got the basket that holds the frames made out of a couple of bicycle tires little bushing to go into the bearing nice and tight the spokes goes down in between all unnecessary spots and removed the bottom we left the bottom spokes to hold the frame up but we have these open that goes down into the bearing put into four frames frames are in take our top board which has a bearing set in it bearings held in on the back these are spacers to make sure it's the right width over the nut onto the bolts nuts on ready to go spins around now we have the cover the optional cover you can use if you want to cover it all up these purposes will show you how it works we've got nice now we're going to show you how you spin it little drill show you how nice the bearings work here's something that Adair and she continues to spin because of the nice bearings and that is spins beautiful I had the tires the wheel bicycle tires around its a threaded rod I only money have gotten this is the $25.00 for the the galvanized can the bearings I had and it appears that will work wonderfully be happy

Channel: patq33333

Views: 557,500

Keywords: honey, extractor, bees, beekeeping, homemade extractor, homemade honey extractor

Id: P3EMnhan_68

Length: 5min 5sec (305 seconds)

Published: Wed Jun 04 2014