Gold Legend - Best Long Range Metal Detector | Training Video

meet the legend the gold Legend This revolutionary device is about to change the future of gold and precious metal detection thanks to the advanced technology provided by geog ground which enables you to reach the farthest and most mysterious Treasures in the recesses of the ground [Music] package contents the main unit smart sensor Wireless handle search antennas device charger user [Music] manual device installation first install the smart senser into its socket in the main unit of the device correctly second install the wireless handle unit on the bottom side of the main unit of the device third install the search antennas in their designated place on the device and then rotate the antennas in a clockwise wise Direction after installing the device and before starting to use it make sure to charge the main unit of the device and the wireless handle until the color of the charging LED changes from red to [Music] blue we also recommend that the device be in a flat and horizontal position when turning on the device for the first time open the device screen unit and press and hold the power button first you will see the main screen main screen explanation search systems la long range system free mode system smart depth system ionic system bionic system on the status bar located at the top of the main screen there are laser status which can be turned on by pressing and holding the laser button on the keypad the laser will also automatically activate when searching through the bionic system LED light status which can be turned on or off by pressing the LED button General sound status which can be controlled in the device settings language indicator the device program user interface comes in eight International languages which we can also change from the device settings clock status which can be adjusted from the device settings battery status which displays the current charging level of the device battery long range system install the handle antenas and smart sensor into the device with the need to unlock the Wireless handle select long range system from the main menu and press okay to enter the system the system screen that includes system settings will appear the user must adjust all settings according to the type of Target type of soil distance and depth of the target he is looking for one Target in this section the user must select the type of Target he is looking for in the surrounding area use the left right arrow keys on the device keypad to change the type of Target you want to focus your search on the device is designed to search for 11 different types of targets these Target types are bronze cavities copper diamonds gemstones gold ore iron platinum silver gold veins gold Treasures two soil in this section the user must select the soil type of the search area from the list that includes seven different types of soil soil types are high mineral low mineral normal Rocky Stony w wet sand three distance in this section the user can search for all possible targets within the range he defines from 1 M to a maximum of 3,000 M by long pressing the left right arrow keys the values will change faster four depth from here we can determine the required depth that we're looking for we can specify a vertical depth of up to a maximum of 40 m underground five search after selecting the desired settings go to the search section here we can see all the settings you specified in the previous sections by pressing the okay key on the keypad the search screen will display second device caliber operation after entering the search screen a warning window will appear press the okay button on the keypad or the start button on the top of the handle to start the calibration and enter the search screen go to the search area and keep the device in a flat horizontal position without tilting it to any side here we can calibrate the balance of the device using the balance indicator drawn on the screen make sure that the device's balance indicator red line is on the green Mark in the middle of the indicator we see in the middle of the screen the results of the ongoing search process according to the previously chosen settings in addition at the bottom the target type which was pre-selected in the system settings the device will rotate around its axis in the direction of the signals it receives from the potential Target third search method according to the zigzag path in the event that the device does not rotate in the case of the initial or normal search that is when there are no targets or signals picked up by the device in the current search area we must always Advance according to the zigzag path in order for the device to capture and analyze as many signals as possible in all directions of the surrounding [Music] area we always recommend starting from the northern region of the target search area until the device Dev begins to rotate around its [Music] axis the user here must always follow the direction of the device's rotation and then we will notice that the device is leading us to a point or a certain direction we keep following the direction of rotation of the device until the device begins to rotate around its axis for more than 90° then we put a mark at this point and we go back in the opposite direction slowly until the device rotates around its axis again for more than 90° and we put a mark at this point as well we repeat this process from different directions of the search area putting a mark at every point where the device [Music] rotates we will notice that it has begun to form a rough outline line of the target area we move away a little from the drawn area and start heading from the northern side towards it and at every point where the device rotates for more than 90° we draw a new transverse line we repeat this process from the four sides of the target area we will see that it begins to form a square or rectangular drawing to this area let's say this region is X the process of verifying the target area we start moving from the area x a few meters towards the North and Define a new point a and then we advance from the right and left of this point towards the area X if the direction of rotation of the device in both cases is towards the area X then this means that the area X is the possible area for the presence of the target we always re recommend proceeding as slowly as possible while searching in this case in order to better Define the target area we repeat the above mentioned process in more than one different direction for the potential Target area x free mode system install the wireless handle antennas and smart sensor into the device with the need to unlock the wireless handle lock select the free mode system from the main menu and press the okay key to enter here we can customize the frequency value we want accurately instead of choosing the target type from the automatic list as in a long range system we complete the remaining settings such as the soil type the maximum distance and depth of the desired Target as in the long range system and start the search according to the zigzag path also mentioned in the long range system smart depth system install the handle antennas and sensor into the device with the need to unlock the wireless handle lock after completing the search using the previous systems long range and free mode we Mark and Define the shape of our previously drawn area then we Mark the center point of the selected Target area so that this point is in the middle of the target area we're going to use this system to calculate the approximate depth of the target below this point after entering the system screen a message will appear asking you to stand over the central point of the target we stand over the central point of the Target and press the start button on the handle and we make sure that the device is properly balanced that is in a flat and horizontal position without tilting to any side then we start moving forward towards the corner of the first path and as we move forward with each step we have to press the start button on the handle we will notice in the corner of the screen the number of steps we have walked and the direction of the path we are taking every path we take ends when the device starts turning right or left around its [Music] axis when turning the device a message will appear to us stating that we must return to the central Target point we return to the central point of the Target and press the start button on the handle to start the second [Music] path we followed the previously mentioned steps in the second path followed by the third and finally the fourth path [Music] [Music] after completing the four paths a message will appear indicating that we have successfully completed all paths and we can now know the approximate depth of the target barrial we press the start button or the okay button from the keypad the device will start calculating the depth of the buried Target and display the result of the approximate depth of the target at the bottom of the screen ionic system we install the handle and the sensor in the device and lock the wireless handle When selecting the ionic system in the device the device will show us two progress bars on the search screen the first at the top reflects the signal strength coming from a metallic Target such as gold or iron and the second bar at the bottom shows us the signal strength resulting from an underground void such as a tunnel W or some other gap after entering the ionic system screen the user must press the start button outside the search area that is in the direction opposite to the direction in which we want to search in order to calibrate the sensor then we slowly move the device up and down at the same speed while tilting the device slightly towards the surface of the ground the status of the progress bar and the percentage on the screen will change according to the proximity and strength of the captured signal to the Target whether it is an ionic Target or a gap to make sure the signal is correct reset the system by pressing and holding the start button once but in a different direction than the one from which the signal was taken the first time we repeat this step more than once and in different directions so if the same signal continues to appear with the same values it means that the signal picked up by the device is [Music] correct bionic system we install the handle and the sensor in the device and lock the wire Wireless handle point the smart sensor head at the metal Target of the type of metal you want to find and then press the start button on the [Music] handle repeat this process again to get a better result we can also use laser light to pick up the signals of the target type more accurately if we want to search for a different new Target we just direct the device and the laser light towards this new Target and press the start button and repeat the previous process again to start searching we slowly move the device in all directions and wait for the results on the system [Music] screen when there is no signal to be picked up by the device only a green moving Circle will appear on the indicator in the event that there is a signal close to the search location or a signal similar to the signal captured by the metal whose signal we picked up previously a red moving Circle will appear on the indicator in conjunction with the Sonic alert indicating the device has started to pick up the signals and has found the desired Target to make sure the signal is correct the user must return to the first metal Target and repeat the process again device settings we can access the device settings from the main menu to enter any section of the settings we select the required setting and press the okay button on the keypad of the device the device settings sections are time display sound language info time we can use this section to set the devic's clock time to change the time press the okay button on the keypad once to move to the time section then the hour number will change to red use the up and down keys to change the hour to move to the minutes pane press the right key and use the up and down keys to set the minutes value display in this section of the device settings you can see settings related to the screen such as sleep mode screen brightness and smart sensor LED light one sleep mode with this option the device screen will go to sleep mode and turn off if the device is not used for one minute to turn the screen back on again press a key on the keypad to turn the sleep mode option on or off we press the Left Right keys on the keypad two brightness use this option to adjust the screen brightness level three sensor LED by turning this option on the LED indicator light of the smart sensor will be turned on during the search so the user can see the search results of the multiple devices systems also through the changes of sensor LED light color the red light indicates the presence of metals of different types the blue color is related to the presence of voids or cavities in the search area the green color indicates the normal state of the search sound in this section the user can control the volume of various sounds made by the device such as the general sound of the device the sound of of keypad clicks and the sound issued during scan we can change the language of the device after entering the language settings section by using left right arrows of the keypad the device user interface is available in eight languages English German Spanish French Russian Italian Arabic Persian info in this section the user can see the complete information about the device after finishing adjusting the settings we can go back to the main menu by clicking the back button on the keypad the new gold Legend device presented by geogr the future of detecting buried Treasures is now now in your [Music] hands

Channel: Geoground Detectors

Views: 28,431

Keywords: gold legend, long range metal detector, metal detector, geoground, metal detection, treasure hunting, metal detectors, gold detectors

Id: o_J-RgrZkLE

Length: 23min 12sec (1392 seconds)

Published: Fri Dec 15 2023