Forsty iTX Build: It ALL went WRONG!

okay so this is a little out of order for this video that but that is because everything that could have went wrong with this build did just about every component had some sort of issue that I had to address and most of these components I would not use again so in order to explain what's going on here we're going to have to go backwards all right so this white build of jeffy's has been an absolute pain in the dick for the past week between bent pins on the CPU he ordered that I finally straightened and every in a damaged case this was supposed to be an all-white Mini ITX build we finally get everything together and the goddamn bios is corrupt a few moments later we were able to to restore the BIOS I cannot believe it I if we had it recording it would have sounded like I don't know like Jeffy finally lost his virginity the amount of excitement that was in the room when we fixed this well let's get this thing put together all right so actually before we build it I just realized I didn't go over any of the specs and I want to go over why this is probably one of the worst builds I've ever done even though I was going to come out awesome because I did it but first of all this case please don't ever buy this case this is one of the worst look these aren't even finished these aren't even polished and this isn't cheap he paid between the case and power supply and then having to get that Riser cuz the one he ordered didn't come with the Riser cuz he didn't check cuz the way AliExpress lists are different variations he thought he was ordering the right one but he's like over $150 in this case is cheaply made plus this power supply that came with it is probably one of the sketchiest Chinese power supplies ever now maybe it's rated for 600 watts and so far everything post tested fine but look at these connectors they're all the same so your 24 pin is the only one different the rest the only difference is what pins the actual cable populates right so like this one that does say is going to populate the three the five and only one 12vt rail whereas the SATA one or the ECI Express ones aren't going to populate the three and the five but they're going to populate all the 12vt pins so I just I don't know I don't like that at all this motherboard while fantastic I had to flash the BIOS the BIOS out of the box was corrupt now that really wasn't that big of an issue for an experienced Builder and in fact once you have the BIOS on the flash drive in the right like file Orient F or folder orientation rather it boots right up automatically into it and starts flashing it because it knows the BIOS is corrupt so that part is actually easier to fix than I thought but if you're not an experienced Builder you're not going to know what to do especially since the website's in Chinese and even after you flash it the English bios that comes on here is is gone and all you have left is Chinese and English mixed bios so you might have to use Google Translate on your phone to do your bios tweaks so w for my own builds I probably would order this motherboard again I would not recommend it if you're not an experienced Builder that being said he spent like $68 on this motherboard and it has a b550 chipset not an a520 and it has the extra mvme on the back so the board is awesome the cooler is awesome just you might have to flash the BIOS out of the box the ram that's a 16 G kit he already had um he bought this 1 TB um nvme SSD and this 1660 6 gig is one of his old graphics cards that he had so he wanted to throw it in here cuz it had some white accents it's actually going to be a placeholder for an RX 6600 probably order an AliExpress um like a Soo white one 6600m now that now on to AliExpress as far as all my AliExpress builds go this is the only one you'll ever see on the channel because I'm never doing it again that has an Al Express case of power supply for what you pay for these you can go on New Egg New Egg for business you can get a budget case or even a premium case or Amazon and get a premium case and power supply for around the same or less money than he add into this and even the budget ones are going to have like polished this isn't even Po and there's cracks in it cuz if you saw my I think no I don't think I did a short on it it was actually only on my company's um Facebook page but this case came bent I had to straighten some stuff out and there's a couple little cracks on here now the the seller immediately approved the return but it's going to cost more to ship it back or around what he paid for the case just to ship it back so we're going to go ahead and put all this together just keep in mind do not ever buy with this this is uh t60 metal fish don't ever buy this case please please don't ever buy this case now at the CPU I almost forgot about that the CPU um pins all four corners had at least two bent pins I straightened a total of nine pins and why because the original seller this isn't the CPU that's in there but this is one I have for representation shipped it in this in one of these upside down okay and as you see there's these little Corners here that get hug that hug around the IHS but on the reverse side there's pins there so if you put this in upside down you're going to bend the two pins there possibly three so I straightened a total of nine pins on this because the cell put it in the clam shell upside down okay don't do that but all right now for real we're going to get this computer put together all right before I get this together I know I keep saying I'm going to put it together but I keep finding more things wrong with this case to rant about all right see look at there's no ears here right to catch or rather no slots to catch these little ears so the only thing supporting the GPU in here is going to be the Riser cable and one screw oh two screws that's it so you couldn't I would never even ship yeah just don't buy this case [Music] oh [Music] oh [Music] oh [Music] oh [Music] all [Music] one eternity [Music] later [Music] [Music] yeah all right so this build took entirely too long way too long it is all set though all right I straightened this out the best I could back here it's still a little crooked um jeffy's fine with that we're going to straighten it out better when he upgrades the graphics card anyways that was a shipping thing I tried my best um we were going to put two 120 mm fans in here and while you can make everything line up and while the description said you could put 2 120 mm fans up here the issue is that the actual screw heads for most of them pull right through and I don't have any um screws that are big enough right now so he's fine with it as is it doesn't really need the fans it runs nice and cool the way it sits so yeah I'm glad this computer is finally done but please like I don't know if I mentioned this already but please don't buy this case all right this metal fish t60 is a piece of garbage is way overpriced for what it is power supply that comes with it is super sketchy um what oh yeah and these filters this is like a sticker here that's adhesiv on so once you put that on like good luck getting it off well I mean it will come off but good luck getting it off to clean it and put it back on so yeah that is it for this low quality video and I'll see you guys in the next one

Channel: Jordo's TechShack

Views: 1,679

Keywords: JGINYUE B550i-GAMING, JGINYUE B550i, Ryzen 3700X, Ryzen 7 Build, Ryzen 3700X Build, MetalFish T60, DO NOT BUY, Budget ITX Build, Budget AM4 Build, Budget AMD Build, Budget Mini PC, B550, Best B550 ITX, Build Fail, Bent Pin FIX, Everything went wrong

Id: W7GECYobkmo

Length: 12min 6sec (726 seconds)

Published: Mon Mar 18 2024