In this short tutorial we are gonna
fix kb5034441 download error 0x80070643 problem. Before moving on to the video don't
forget to leave a like. I recommend watching the video once before trying the solutions.
Our first solution is to upgrade the partition with minitool and then update windows like
that. The reason we are having problems is that the recovery partition is less than 1 gb when
updating. We will solve this problem by upgrading the recovery partition. Microsoft has shown how to
do this with cmd codes in their forum, but this is a long and difficult process. We will do it with
the help of a minitool. The program we need to download is MiniTool Partition Wizard. There will
be a link to the site in the description section, you can open the site from there if you want.
After opening the site, scroll down and click Download Now and then click Save. We've downloaded
the setup, now we're going to install the program. To do this we double click on setup and then
click Run. Select our preferred language and click OK. Then we select Continue installing
free edition and click Next. Since the only thing we need is MiniTool Partition Wizard,
we untick the other options. After doing this, we click Next. Then click Next again. Click
Finish and finish the installation process. Here in this interface we see our disks and
the partitions related to our disks. As you can see here, there are disk parts named recovery
partition. These partitions should be 1 gb. Now I will show you how to do it. First we need to
create free space on our disk. The disk we need to create free space on should be the disk where
windows is installed. If you have more than one disk, you should pay attention to this. Right
click on the disk where Windows is installed and then click on Move/Resize. As you can see,
currently Unallocated Space Before is 0. We need to set Unallocated Space After to 1 GB. We
can do this with our mouse or by typing in the section below. We don't need more than 1 gb, it is
enough to make it exactly 1 gb. After doing this, we click OK. Then we click Apply to save the
change we have made. We need to restart our computer for the change to take effect. After
clicking Yes, we click Restart Now and restart our computer. I will not be able to show the
reboot process because I am recording a video. We restarted our computer. Now we open the
application again. What we need to do here is right-click on the recovery partition
and then click Extend. After doing this, we select Unallocated from Take Free Space from.
Now we need to add space to the partition. Since I have already set it to 1 gb, it says that
the new size will be 1.30 gb. This won't be the case with you because you didn't
set it before. You need to use your mouse to increase it until it is 1 gb. After doing
this, click OK and then click Apply again on the left side. Click Yes to continue. As you
can see, we have successfully upgraded the recovery partition. Now we will no longer have
problems because of low recovery partition. Now you can do the update by clicking check for
updates. If you continue to have problems, we will move on to the second solution. Also don’t
forget to like the video if you haven’t already. The second solution is to skip the update. If
the first solution didn't work or you don't want to do it, you can try this solution. In this
solution, with the help of a small additional program from microsoft, we will skip the update
we have a problem with. This way we will not be bothered by this update. I will put the program
we will download in the description section, you can click and download it from there. We open
our browser and download the program. If you do not want to download the program from the link
in the description, you can download the program by typing wushowhide.diagcab in your browser.
After downloading the program, double click and open it. Click Next and continue. Now the
program will search for updates. This process may take a few minutes. The process is finished.
Now we click Hide updates. Several options will appear here. Select the update we have a problem
with and click Next. I will use another update as an example. The update you need to select
is the one in brackets here. Then click Yes and then click Close troubleshooter. This way we
can skip the update that we have a problem with. If you don't want to deal with the first
two solutions, you can format windows. We can do this without losing our files. To do
this, right click on the windows icon and open Settings. On the left side we click System
and then Recovery. Then click on Reset PC. Here you need to click on Keep my files to format
without losing your files. After doing this, continue with the formatting process. I will not
do this because I am recording. After formatting, you can check if the problem is solved or not.
We have come to the end of the video. I hope one of these solutions fixed your problem. If the
video helped you, don't forget to like the video. You can also subscribe to my channel to support
me. Take care and see you in the next video.
