Hello, this is Dr. K There are a lot of people who like mini PCs Yes, when UMPC like this KoHJinSha came out the laptop is so small that it is easy to carry I really knew that such a small laptop would dominate in the future. This mini PC, which came out in a finished form after 10 years, really it has become a product that is mainly used only by enthusiasts Every amazing things doesn’t come out to be successful Anyway, this KohJinSha I reviewed before And now the main character today is this Asus It will be a netbook called Eee PC series. Really with this nice design I thought it would open another golden age of netbooks Asus Eee PC 7-inch product Yes, now this product has run out of batteries I need to connect the adapter Yes, it's been a while since Windows XP It's been a long time Windows XP boot screen Let's see Yes in the case of this product The CPU is a 900MHz single core It is known that the actual operation is 600MHz Reaction rate Because XP itself is an OS that meets the old specifications The reaction speed is quite fast The hard disk is an IDE format SSD. It is like this at 4 gigabytes RAM is 2G, the maximum capacity used in this device. Because it is installed like this These reaction rates are quite fast If you install an old version of Chrome, web browser will probably be available Yes, even in the case of the Naver(Korean famous portal) main screen Can't load due to error YouTube is not connected It seems difficult to do such things using the Internet. Now, I have a problem here Will I have one as a commemoration of the Windows XP mini laptop? Actually, it would be good to install something like a classic game here. Like the old XP games Previous DOS games I think it would be good to do that I am very sorry for the XP OS Let’s proceed with the modification Raspberry Pi RAM 8GB If this is a model like this you can do almost anything you can do right now If you put it inside I can still take it out and use it I think I can make a notebook like this Using all this really big bezel Can I put a 9-inch LCD Or will I just put 7 inches of this size I also worry about that I have to open it Because I don’t know what this interior looks like Open it If this LCD can be recycled I can recycle it Probably not going to be recycled. In this case It looks like a speaker goes in here Like changing the speaker to the back Will it be on the big screen Will it be just 7 inches I have to open this and make a decision Now another problem I made a video of making a Dexbook I told you once in that video To use the trackpad, you can use the PS2-USB converter. In the case of the keyboard Really hard way There is a way to use it using something called Teensy board There is also a method of removing the board from another keyboard and using it. It doesn’t seem to work well after trying it So maybe if I can't save this keyboard I put on another keyboard here I think I might use it Yes, I have explained so far I will disassemble it and proceed It would be nice to use this iron plate as a heat sink. By attaching a thermal pad to the Raspberry Pi CPU Using this itself as a heat sink I think it would be nice to try There was a cooling fan The space is a little narrower than expected There seems to be some difficulty Yes, the pin on the display is 60 pins 60-pin It's almost never used Usually 40 pins and 50 pins are used. So the display is inevitable I have I think I need to use this 7 inch display You can see that it's 50 pins Almost fits Yes, it looks like it will enter with a cut on this side Also, because it is a touchable display It would be much better if it touched Now the question is, how do I take out this line? It's a big challenge now I don’t think this is usually a problem. Yes there is a camera like this Raspberry Pi can also use a camera I don’t know if it can be extended like this. I have never used it If it happens, take it off later I think I can install a camera here I don’t think the camera will come out so small In my opinion Except for the speaker like this All have been removed As expected, this display is now installed in this small space Can I take the cable out this way? That's the biggest problem I have to try another challenge If it doesn’t work, I have to take it out like this. Yes I have to if there is no way Raspberry Pi 4 And this time I will use SSD So, these two boards have to go into here The controller board for the display must also be installed. If I try to put it in, this will not be really easy So first Even if you look at it, the height is not right So all these ports need to be removed now This USB port cannot be removed. Yes I have to remove the solder from this side I don’t think it will be easy Leave it as it is I think I need to remove all ports. I should do that, so this plate will be installed And this display and camera slot If I don’t remove it, it won’t come down I have to remove most of the things It will take a lot of time again In this way, the SSD can be replaced Because I will make it like this If this is successful, it will be easy to proceed. Anyway, I will try removing all ports Yes, I think I did this for almost an hour Know-how to disassemble the battery well If you know a little, please let me know. Oh, and those who follow this is very dangerous Put in something like this driver Or touching where it is short circuit Then there is a very high risk of fire or explosion, Therefore, I would like those who will do the work carefully Yeah, it looks like it took a few days to get here It’s not going well Yeah What is decomposed like this Quite messy I can attach it with a strong bond I can't see this side, so I roughly cut it off This is the visible part, so I tried to cut it Nevertheless, it came out in such a bad shape I should stick it with a strong bond I have no choice Then, let’s work on it again. I have to make a power switch The original power switch is a push type like this Not push lock That's why I need a switch that locks the power. The push lock switch I usually use the size is large and it does not fit here So I have to use a switch like this I think I should put it on this side Originally, I was trying to save this LAN port As you can see the size It is not a size that can fit Because the wireless LAN itself has good performance In Raspberry Pi 4 There is no need to use wired LAN So I put a switch here another port here I think I should block this as well Blocking with a white 3D pen I will put the switch on this side Yes I still have a long way to go I'll try to proceed again quickly
