Getting started with your flipper zero. Setting up your micro SD card. It's important to insert your micro SD card into your flipper zero before
updating the firmware. This card stores various data like Keys cards remotes and databases. Flipper zero works with FAT 12, FAT16, FAT 32 and exFAT file systems, and supports micro
SD cards up to 256 gigabyte. However a 4 gigabyte micro SD card is enough for all the essential data. Keep in mind that using a high capacity micro SD card may take a bit longer for the process. Unlike modern devices your flipper zero uses a slower but energy efficient SPI interface. Choosing the right micro SD card. Use a high quality branded micro SD card like SanDisk, Kingston, or Samsung to ensure your flipper Zero performs well. Low quality cards can lead to poor performance or even damage your device. Inserting your micro SD card. To insert your micro SD card. One - find the micro SD card slot at
the bottom of your flipper zero. Two - hold the micro SD card with the pins facing up and gently push
it into the slot until it clicks. Three - check if your flipper zero recognizes the micro SD card.
Using a high quality micro SD card can extend your device's battery life especially when the
display backlight is on troubleshooting micro SD Card issues if your flipper zero doesn't recognize
the card make sure it uses the SPI interface and not an SDIO interface the SDIO interface will not
work also make sure it has the correct file system anything other than fat 12 fat 16 fat 32 or X fat
will not work if your micro SD card has the wrong file system or no file system at all format it
formatting your micro SD card go to main menu settings storage select format SD card and follow
the onscreen instructions update your flipper zero after formatting to reinstall databases stored on
the micro SD card still having trouble try using a different device to format your micro SD card or
a different card Al together the card you have may be damaged safely removing the micro SD card to
prevent data loss or corruption go to main menu settings storage select unmount SD card and follow
the onscreen instructions once I'm mounted gently push and then pull your micro SD card from your
flipper zero if you struggle to remove it use a thin object like a plastic card avoiding excessive
pressure to prevent damage to the card slot want to learn more check out my other flipper zero
tutorials flip the world and hack the planet