Hello everyone, I'm Yang Xiaoxian Today I'm going to make a camper bed frame My bed frame was decided to use iron pipe Why use iron pipes? Because iron pipe is compared to wood Actually it's not that heavy Besides, it is not more expensive than wood. Iron is cheaper than wood This is I'm quite surprised Because a large piece of wood costs thousands of dollars Only one pipe Two or three hundred Why would you want to use iron pipes for bed frames? There are also several reasons It's because there is still a car inspection problem. I need to clear the car and go for an inspection So the bed needs to be removed Might be nailed if made of wood I don't want to crucify the bed The bed should be easy to disassemble So I decided to do it with this tube Waiting for the car to be checked just take it apart Then it's time to take it apart Can also be cleaned inside the car Just like this So how do I make this bed frame? I can't weld because of inexperience I choose the car-free tooth kit This kit is simple You don't have to be able to solder you can assemble It's like playing a game of plumbing just a pipe put this in and lock it up and then another tube put in Then lock the point This completes your bed frame It's that simple Then after the bed frame is done Put on our planks the bed is done iron pipe here I bought about 4 1 stick is 6 meters Why buy this quantity In fact, I have designed Let's go straight to the design this design I designed it for almost two months Read a lot of DIY campers on the Internet Both foreign and domestic Then plan slowly in front of a computer table dining table concept Behind is our bed frame There are four planks on it Four wooden boards are stacked up to 180 cm the size of a bed Let's put the iron pipe now make it look like a blueprint Before making the bed frame Steel factory has been invited Cut to approximate size So you don't need to cut anything The steel factory cuts only 10 yuan fast and accurate this iron pipe about 200 yuan 6 meters long so i bought 4 It cost about 800 bucks nearly 1,000 bucks On the contrary, this kit is more expensive this turn kit It cost about 5-6 thousand bucks So this turn thing really expensive But compared to durable beds Actually it's alright If it's really practical and durable I can accept Ask an outside master to do it It should be two or three thousand And why use it because I want to design my own bed frame self style Have a DIY feel OK then...then... Then...then...then...then...then... Start work directly it this kit use this hex wrench to open it then put it in That's fine Then put this in Just follow the design Now basically under the bed frame almost done Probably in this form Type H wait a minute and move on Add horizontal support and it's done It's actually quite simple about this height i would want to do 32 cm Because ordinary barrels and boxes about 30 cm The reason why I choose iron pipe Just because if I feel If the height is too low or too high I can also take it apart and adjust it so after even if it is wrong It's also very adjustable That's what I think The advantage of this tube If it is wooden If you do it wrong, you do it wrong no solution So the convenient place for this tube is here Then this space Mainly will put some large items such as buckets, tables, chairs Or a large canopy, etc. Because of the larger space The usability will be wider better storage we're ready to start now Make the support for this bed frame I just took the part of the post It's all measured and marked. Then the grinder saw directly off glasses, masks, shoes Ready to start sawing pretty cut like cutting tofu A little bit of excitement is real I use this iron pipe I just used to go down and compare Repair it if it sticks out That's perfect almost sawn Let's assemble it now I guess it's a bed frame. Just got the bed frame ready. it takes a while to lock But compared to the real bed frame It should save time There is now a plank Two planks, three planks The fourth plank is here Here is the door open I'll saw this one off then How do I put the planks up? Just use the pipe here pull it over plank to put it on this part I plan to go higher here is a table computer, cooking can be here make a computer desk there will be a drawer this part Just make a place to put it in the refrigerator The white one on the blueprint is the refrigerator It's already preset here our aisle space it's here behind the bed words of sleep You need to put the board first we can have 180 cm standard double bed size Another reason for choosing pipes It can do fine-tuning actions back and forth So I think it's very flexible That's why I use this tube Then put the board up you're done The planks here will make an open back let's sit here There is a backrest for reclining That's enough load capacity Then put our bed board Carrying capacity will be stronger Galvanized Iron Pipe it's not just one size There are many sizes mine is 6 6 branches of this tube It has thickness main sleeping place The horizontal support bar is here Here are 1, 2, 3, 4, 5, 6, 7 these seven I mainly use thicker This thickness is about 2.8 so this pipe compared to this pipe it is very heavy Tube with thickness 2.0 if used as support it will shake will sink I think if there is a sinking phenomenon will not sleep well So I choose 2.8 I want to strengthen the support of this place in the middle Let us see the difference in thickness This one is thickness 2.0 This one is 2.8 thick The thickness of 2.8 is used as the support of the bed frame 2.0 is used as a side-by-side There is no need for such a heavy load There are four planks here width of each board Both are 45 cm These four will become our bed planks I just got the textures smoothed out I plan to use the grain of this pine to nail Get the spacing right now See if there are any errors If there is any error, please fix it as soon as possible Just removed all the shelves Just a little repair now After painting Just put it on the car Let's just adjust it now spent an afternoon It's finally almost fixed And today... Using a grinder for the first time in my life quite excited hold tight it's fun, it's fun But also very dangerous So a lot of protection I'll come back to wash the tubes in a few days After washing, we will paint again All the pipes are here just wash it just use this degreaser It can easily remove oil stains In fact, salad can also be It's not expensive to buy online 7. 80 yuan is a big box wait for it to dry we'll wait until tomorrow paint again After a day it's finally all dry brush this first I washed it yesterday and it rusted It's really rusting fast Now it's time for the primer I chose this Also red card it is alloy primer Because the tube is so smooth If spray iron it will peel off the paint easily So be sure to apply a primer first It's less prone to paint peeling This primer needs to be tempered with a hardener The ratio is 1:1 Inexpensive from the paint shop About two or three hundred dollars OK, let's paint now Then ready to start painting it is green All iron pipes are primed wait for it to dry top coat afterwards Of course I don't want green It's just a primer Wait for another black paint green feet Matte black paint ready Come paint this iron pipe brush, pine perfume Let's just start painting Now the paint is finally dry Let's get it straight into the car Let's assemble it All assembled YA ~ It's a bit tiring But it should be fast Get it done in a day OK, let's go straight to the car try it The bed frame is ready Then this distance I was supposed to grab 32 cm The result is now about 33 cm just to put some Compare standard sizes About 30~32 I think it's safer The result is an extra centimeter should be acceptable But I hope the top of the head is not too oppressive 1 cm more should be fine The painting steps I think it's the more troublesome part Because it took me about two or three days But the effect is not bad matte black feel pretty cool Just cut the tube Then there's no hard part Assembly is simpler just take the hex wrench Just lock it up Actually I'm not completely locked It's still mobile Only the edges and corners are determined to be locked first Then wait for the bed The front and rear positions are sawn After putting it up I will nail down again That should be more foolproof OK, that's it for our bed frame video this time. like my video Remember to subscribe and like If you have any questions, please leave a message below Next I'll do the bed plank part see you next time Bye-Bye
