DHCP Server Configure on Cisco Router Complete : DHCP Server on EVE-NG, Setup Internet, NAT EVE-NG

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
good morning everyone welcome back to internet or training and in this video tutorial I am going to configure DHCP server on cisco router step-by-step and later I'll be configuring one simple lab for DHCP server and client and I would say that how how the clients are getting IP address from DHCP server and Israel is internet connection configuration so let's dig in so I'm going to open VM well first just to make sure that my VM is up and running you can see the IP address which is 192 dot 168 at 1 or 2 2 1 3 1 so this IP address I'm going to use in my Google Chrome I've given my authentication you can say that if is open and here that add new lab so I'm going to add a new lab DHCP configuration you can use any friendly name so in my case I am going to use DHCP configuration only so click on Save button and Neola has been created for DHCP server configuration here I'm going to ahead I'm going to have some nodes so first I'm going to take V is router cisco router Ram is going to be 1 0 2 4 8 thorough net 4 would be more than enough that's ok fine click on save and second cisco switch let image and then you can see what is that one yeah switch and I am gonna rename to switch switch Bob's switch only 512mb of ram would be enough a switch I'm gonna heads I'm gonna have some workstations so windows number of nodes could be to console RDP remote extra console I'm going to use for Windows workstation in Virtual PC I'm going to take to a network right Network normally this normally the management clouds it with this would be our internet which will be residing our Cosette network you can see and I am going to connect with the VIS switch I think 1 2 3 4 4 workstations right I hope so I am going to have another port group 2 port group would be for Ethernet interfaces right click on save so I am going to pause my video for a while to have the link inactivity okay guys I have drawn by diagram I'm going to take another text which is T is CP server sixteen font size bold color red okay this is going to be our DHCP server okay so let me start all my devices so I'm going to start one by one start first router and then switch let me open with CQC RT this should be fine you can say V iOS is loading this is our router so router is loading and switch I will not be having any configuration so I'm going to leave it default and then let me start Windows 7 so I have 4 workstations and here in this video I'm gonna cover DHCP silver and as well as internet connection right we'll be in the router only so I am going to configure in this device and this interface is our inside network and this is our outside network right still pudding yeah VI OS is loaded so I'm gonna press M from keyboard because I do not like to enter with initial configuration suppression from keyboard keyboard and hit enter here so enabled configuration global configuration mode I'm in configuration mode down the line comes from 0 logging synchronous because you would not be you know interrupting with system messages and let me configure our outside interface which is key to beat 0/0 IP address 192.168.1.1 followed by 24 bits mask no shirt and now configure our inside interface which is typically 2/2 1 106 8 and then 20.1 shirt show IP interface brief you can see that both the interfaces is up up and running and I paid this also has been configured properly so now figured out IP configure IP route and next stop is 1 and 2 1 6 a 2 1 or 2.2 let me think next up because if next up doesn't work so in total so would not be working at all yeah I can reach my next stop and then show IP it out you can see static route has been configured right this is our next drop now let me configure to start this workstation and VPC 5vp c6 global configuration mode down so that becomes forget DHCP server okay first check yeah you can see the IP address yeah so I can reach google.com as soon as I you know entered different Stratego I can reach google.com and then it's a yahoo.com should be able to reach even sit resolving my next stop here there you go I can reach let me complicate DHCP server ok first before configuring DHCP server I need to configure interface V position 0 this would be our IP that outside okay and gigabit City slasher one is this is going to be our inside network let me make sure okay so I be mad inside and let me clear to one excess list that means X is this to one form eight anything okay so permit anything so because whatever or you know inside Network IP addresses so all allowed so everything loud and I have to configure net as well so IP NAT inside source list this is our access list number so in my case my existence number is one so source list also going to be one right and interface key beat 0/0 this is the outside interface overload meter okay and you may need to configure DNS as well IP name server date or date or date okay guys so internet connection has been configured so let me configure DHCP server now IP dhcp pool dhcp underscore server you can use any friendly name so in my case i am going to use DHCP underscore server network this is going to be our inside subnet which is 192.168.1.0 20.0 space slash 24-bit mask default router is going to be one nine two one six eight 20.2 one this interface IP address right DNS DNS server I'm going to use Google DNS elf but if he was if you have only in a servant in your network you can use that IP address so in my case since I don't have my own DNS server so I am going to use Google DNS server and lease two days okay so after two days you up your IP address will be renewed right so least for two days exit and a next point is IP dhcp exclude wrench so i'm going to exclude some addresses say by case 1 9 2 1 6 8 20.1 starting from 20.1 and then up to 1 9 2 1 6 8 20.50 right so 1 through 50 so this is our static this will be able to static wrench because for example if i want to configure printer network printer IP phones right so you can configure it statically the range is going to be 1 through 50 right 8 enter exit so DHCP server has been configured properly so let me open Windows 7 machine go to CLI you can see IP address is here or is configured automatically right you can see what network internet connection also there you can see that internet access if you do not get IP address you can try with this combat IP config space slash release ok and renew the H already generated accessibility a paper fake you can say my IP address is 192.168.1.5 t1 so it is starting from 51 right so let me browse any website I should be able to reach goal yes I can reach google.com for example cnn.com yeah I can reach so one thing I can show you here which is very important that I click on take a few config slash on yeah by DNS 8.8.8.8 figured here in the router because they show down pipe section I paint ESP cool you can see the DNA separate rotate rotate so let me configure next 2007 machine yes go to CMD resolving appear this let me check FPC oh I see frequently no vision take right so what I'm going to do I pick on pick / no delays or current IP configuration and renew yeah you can see what what network I'm going to select what network now should be fine IP config 192.168.1 TDOT 52 an internet connection also there as you can see so let me browse any website for example google.com yeah so everything configured properly then put your PC pipe oops when is there is right IP show IP should I be so my IP address is configured right now IP dhcp take help so it's F is linear disabilities oops I should be able to receive daughter misses yeah let me check you can see the IP address is signed which is 53 show IP the left left will configure lust and find on workstation IP dhcp show IP to IP address is configured the dhcp you should be able to deceive donor says yeah so everything was fine okay guys we have successfully configured our lab DHCP server compliant and as well as Internet connectivity and thank you for viewing the video and I hope this video has been informative for you and if you liked this video please subscribe my channel and as well as share this video with all your friends and also I would like to request you to watch my videos again and again so you will be habituating you know with Ybor DNS 3 or whatever the plan software you can do your own labs thank you everyone
Info
Channel: InterNetwork Training
Views: 11,669
Rating: undefined out of 5
Keywords: DHCP server on EVE NG, Configure NAT on EVE-NG, Configure Internet on EVE-NG, InterNetwork Training, DHCP Server on Cisco Router, Cisco Router DHCP Server, Router as DHCP Server, configure DHCP Server on Cisco Router, EVE-NG lab, Cisco Router DHCP Server Configuration, Cisco Router DHCP, How to Configure DHCP Server on Cisco Router, Configure Complete DHCP Server Cisco Router, Configure DHCP on Router Cisco
Id: _msbUJVJgjs
Channel Id: undefined
Length: 20min 44sec (1244 seconds)
Published: Tue Dec 12 2017
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.