Deploying End to End Website on AWS | Integrating EC2, Route 53 and RDS | Intellipaat

hello everyone welcome to this session on deploying an end-to-end website on AWS today in this session I will be taking you through how you can basically deploy a website which will be also interacting with databases and a service called s3 on EWS now this is an advanced session guys we already have taken two sessions in the morning so in the morning we started off with understanding why should we learn AWS then we moved on and understood how we can launch our first server on EWS and now what I'm going to show you is how you can deploy your own website on AWS end-to-end and when I say end-to-end and it basically requires a lot of components which we will be discussing about in the session later today now I have people who are watching this on YouTube and I also have people who are watching this session on webinar so guys who are there on webinar you are free to ask questions as and when they come along and I'll be happy to answer all these queries for you okay so you should have a question box at the in your GoToWebinar panel so I will be answering questions from there okay so without any further ado guys let's go ahead and get started with this session so let me first tell you what we are basically going to deploy to there so guys we are basically going to set up something like this today so V has a user we will try to go to a URL like this www.ewtn.com now what will our website be able to do let me quickly show you right so I have a website on my local host right so let me see if I can show you that website so one second let me go ahead and launch this website once okay in order to launch this website what you have to do is I will have to install some packages let me go ahead and install them so I will have to install PI MySQL let me see if this makes it running and okay so what we have to do is we have to deploy this let's say and the way we are going to architect our website is going to be something like this okay so first of all we will configure this domain to connect to our virtual server that we are going to launch right and the way to do that would be using the route 53 service on AWS okay now our website will be able to upload objects onto Amazon RDS early on to a you know a storage service called s3 right so our website whatever images that we are going to upload using our website it will be uploaded to you know an object store called s3 from where you will also be able to see that the objects are getting uploaded and at the same time the entry for this will also be stored inside a MySQL database which is going to be inside Amazon RDS okay so guys this is what we are going to deploy today and we are going to go ahead step by step so first let's go ahead and start by setting up our website so first let's you know deploy a database a MySQL database on AWS now the way to do that is by making use of a service called Amazon RDS alright so let me first go ahead and switch to my AWS management console okay so guys this is what my aw management console looks like and now what I'm gonna do is I'm gonna go ahead and click on ec2 sorry so we are going to deploy our database first so let me go ahead and select RDS okay so you just have to type in RDS over here and it will basically make you go to the RDS service now once you are over here this is how the RDS Dashwood looks like what you are over here you will have to click on something called as create database just click over here and now what you will have to do is you will have to click on so this is standard create this is going to be automatically selected for you in the engine options you will have to select MySQL so let's like that and now with MySQL selected just scroll down and you can select a MySQL version ok now you can select any version that you want I'm going to leave it at default which is 8.0 and scroll down to select the template in which we want to deploy it right now since we are practicing on array WS account what I recommend is for you to basically deploy everything in the free tier so just select retail over here right and then scroll down and once you have reached here what you have to do is you will have to go ahead and specify your database how will you basically identify this database server ok so let's say we give this name to be employee database because our website is basically going to be an employee website about how we can basically upload data of an employee on to you know our website this will be about that so let's name our database also input right and now let's go ahead and specify the username and the password ok so let me specify the username as Intel apart and let me specify a password as well so let me go ahead and specify the password ok so I've given a password and now what I can do is I I don't have to choose this because this is basically which kind of machine do you want to launch so the machine that we want to launch is going to be key to dot micro itself so we are not going to touch this because this falls into the freeter and this is automatically selected for me when I choose the template as Ethier above okay now the next thing that I might have to see is auto scaling so order scaling basically means if you get a lot of load on your website through your server become two or three instead of just one so we do not require that as of now and I think it is a little advanced for you as well for this class so we are not going to select this option okay then which network do you want to deploy it in so we are basically going to deploy it in the default Network for now so we are not going to touch this and it is going to be a password authentication which is which is fine for us if it publicly accessible so yes it will be publicly accessible which means it will be available on the internet for us to work with okay so we have selected yes over here and next we will have to change nothing else we can just now click on create database and my Maya skill is now basically getting automatically created now if you would have noticed if you want to do this on your own and by that what I mean is if you were to not use any cloud provider and if you were to deploy a database server you would have to do a lot of things so first of all you would have to launch a server then you would have to install MySQL manually on it right and then configure it to basically allow internet connections from outside right but that is not something that you have done for now right what you have done is you have just won through a dashboard where you have selected the right options and then you have just clicked on create a database now whatever is going to happen now is automatically going to be managed by AWS and that is why this service the service which you are using which is Amazon RDS them managed database service which basically means everything from deployment everything from installation of the database everything is taken care by EWS and we don't have to do anything in it okay so now this is getting set up so let's wait for some time and me let's let's hope this get set up soon if we come back to a slides what we need to next figure out is our s3 bucket where our data is going to be uploaded and now what we are going to do is we are basically going to you know create a bucket for us where all our data will be uploaded so coming back to my AWS management console what I can do is I can just search for the three servers over here click on it and now I will be taken to s3 management console okay now on the s3 management console what I'll be doing is I'll be creating a bucket so let's create a bucket and let's call it let's call it employee let's call it add employer ok and this will be in the ohio region u.s. is two which is great that it nothing else we are changing we are just clicking on create bucket now it's very important to take note of where your bucket is being deployed so our bucket has been deployed in the ohio region and if you talk about RDS that will also be deployed in the ROI region itself so we can check that quickly if you go to RDS again how can you check which region you have basically deployed in socin you can check it in the URL it says US is to all what you can also do is you can just check the region over here at this section of your AWS console it says Ohio over here as well alright great so now we have created a bucket we have created a database right and now what is left is to deploy our server which is going to hold our website basically ok so let's create a server as well so let me type in NC 2 over here click over it and let's click on running instances so here what I'll be doing is I will be creating a and the way I'll be creating it is I'll be creating launch instance and what I want to do is I want to basically deploy an Ubuntu server so I'd be selecting a one two over here right now in open - what is the processor that I want to choose from my server it will always be clear eligible so I'm gonna choose that click on next then how many instances do we want to launch we just want launch one instance become one show you how we can set up a website okay so we don't want to change anything over here and that's everything also you will not change anything just click on next this is how much hard drive will be given to your system so we will leave it at default to be 8gb please click on next now let's click on configure security groups now here you will have to select the default security it should already be there when you first created account this select this and click on review and launch ok now you can review all the settings that you want to basically check and if everything looks good just click on launch and over here you can either create a new keeper or you can choose an already existing one so go how to create a key pair how to do how to convert it how to set the right permissions everything has been talk to you in the previous session which is at 5:30 so that was deploying virtual servers on AWS right you can just refer that as well to see how you can do it over here I'm gonna use you know key pair which I have already defined which is basically going to be Mac wire okay so I'm gonna select this key pair acknowledge that I have it and click on launch instances so now my ec2 is getting launched so it will take some time meanwhile let me see if any questions so Prashant is saying you have shown the example of deploying a website is it possible to deploy components and compile my process in cloud itself so Prashant I think what you mean by this is deploying micro-services and cloud so yes Prashant that is possible to the prior to right the way to do that okay multiple ways you can do that I mean if you define a micro service I don't think you should deploy it on one server there lot of other services in either blue ice as well which you can make use of for example you have something called as elastic container service so if you are a little more advanced ne WS on the services you can actually deploy it over there rescue okay so now what I'm doing is I have just launched you know my instance and let's check the status for this instance so first of all let me name this instance something so let me put it okay so my instance is now in the running state which basically means it is all good I can just refresh and now we can try connecting to one machine okay so let's select the machine let's select the IP address of this machine and now let's try to connect to it now how you can connect to it you can basically connect to it using a terminal so what I'm going to make use of is my terminal over here okay and let me go to the place where I have save the key list so right so the command is SSH - I dot slash mic - y ou dot M the username for my server is ubuntu and this is the IP address so now I'm connecting to my easy to server it's going to ask me whether I trust the service or yes I do and now it will allow me to connect to the server great so I've connected to the server next thing that I'm gonna do is I'm gonna go ahead and you know connect to my RDS first to see if everything is working fine or not from the network point of view okay so how can we connect to our audience first we need to deploy a MySQL client on this machine which will help us to connect to our RDS machine so how can I install the my little clients let me go ahead and update this machine first so the command would be sudo irrigator t it this will update the machine okay some machine got updated and now what I'm gonna do is I'm gonna install MySQL client so sudo apt-get install MySQL - client okay this is gonna take a while to install meanwhile I'll just take up questions so not many saying how to do with this with windows so Nagamani if you want to ssh into an instance you will have to download a software called putty right so i showed that in the previous session which was at 5:30 you can just refer that after this session as to how to connect from windows to server that you can connect to or you can just search online as to how to connect with the software called put T to a Linux instance that you have deployed on EWS okay so I hope that answers your question already so now my still client has been installed on my machine on my AWS machine and now I'm gonna do is I'm going to try connecting to my RDS now for connecting since I went over my still client the command would be MySQL - h/h being the host name of my database auto connect to and for connecting to it we'll just call my browser go to the RDS service again so what I need is the RDS URL so let's go there okay and now we can just select the database instance that we basically want to connect to so I can just click on the database that I deployed earlier and this is the URL that I'm looking for to connect to my instance okay so I'll just select this and let me see if any other information is required from my side okay everything else looks good so now what I'll do is I just enter the URL over here so MySQL - etch the URL then - username which is in telepath and then the password so they can enter the store as well and as you can see I have successfully connected to my RTS and I am on the - shell now okay so before I move on let me see if there any other questions so Nagamani saying other than using t for windows what is the other than you can also use git bash you also have something called a super pootie which you can also it's a premium pool so stress is saying we configure this on linux system all right so now that I'm inside the MySQL guys what I'm going to do is that I will go ahead and see if the database is actually initialized on this server so I'll just typing show databases and there is no database as of now deployed in this server so what I do is I type in the command create database employer so database is now created and now I will have to create a table inside employee where basically my you know information is going to be stored ok now what all information do I need to store in this table that will be clear from our website right so what we can do is we can just check the power of our website and understand what all is required to enter in our website so ok in our database so we need a column called employee ID first name last name Prime skills location and employ image file ok so these are other things that we need to enter I think this is not required because this is the SQL query and here I just have five things that I'm inserting in SQL so what I do is I'll just select these five options and this is what I'm going to insert in my database so I can just go ahead I can create table employ and I can just specify the column so first column is EMP ID let's give the data type to be as their cat and the value to be as 20 after EMP ID the next is first name so let's give f name over here and the value would be work 20 then we can give last name so last name again would be back 20 I'm just giving the default value as 20 characters we can modify it if you want primary school so we'll give the primary sting to be where care can and the range would be 20 characters too and then the location so this would be the last column for our table and share also will give 20 characters okay it says no database selected so I'll just select you use employ this will change our database and now I can just copy the same syntax okay it says arrow so let me just check what the error is okay so I guess there are arrows which are causing the problem so let me just copy it one by one Lloyd then EMP ID with the comma then F name then last name then primary skills which is this and then the location okay so my database is now created successfully so if I type on shore tables it's showing you that the employee table has been created great so now that my employer table has been created I can actually go ahead and start configuring my website to work okay meanwhile I'll just check if I have any questions okay no more questions let's go ahead so now what I'll be doing you just exit from my station and let me exit from the ec2 server also okay so I'm back to my local and in my local let me go to the code where basically I have my website now first let's try to run the website on our local system and then you will try to deploy it on the AWS management console okay so let me open it in sublime text our code here it is and here I will have to first configure my website so here I will be putting the hostname of RDS so let me get that force nothing but the endpoint so let me copy it so this is the hostname next thing that I'll be doing is I will be copying the username so username is nothing but in Kelly part then I'll be specifying the database so the database would be employed and the bucket name is EMP - add if I'm not wrong so let me just go ahead and verify that the bucket name has to be the same as what you have created in s3 service so it's called add employee so let me specify the same in my code again the bucket is called add Lloyd Wright and then we will be specifying the region so region as US east - - okay so guys this is drawn the configuration that we have to do now I also have to specify the password over here so password would be in tell apart 1 2 3 and don't worry I will be deleting this database later so you guys can be rest assured this this is not going to be causing us a problem ok so now what I can do is I can go back to my code and let's see if we can deploy this website on a local okay so website is on on a local now right so let's see how the website looks right so if I go to localhost ok so this is how my website is going to look like that ok and when I enter the information over here it has to go and now be stored in my MySQL database whatever infant and I'll be specifying over here that information will be going ahead and be stored in mine database okay how what I can also do over here is now I will be making it available not on local boost but actually on my ec2 that is my web server so let's see how we can do that so first things first I will actually have to go ahead and close this application right and now let's save everything so I will be pushing it to pick up so let me stage everything on my local copy it right and now let's just go ahead and push it so what I have to do is I have to create a remote repository so let them go to github.com now on deegeu.com let me create a new repository and let's call this repository as either blue as - life okay it will be a public repository let's click on create okay so repository has got created let me add this in the origin added and now let me push it to my website to make it all right so my website has now been pushed onto github so I can verify that by reef dashing over here and I can see that I have everything uploaded on this okay so let me check on fig dot P wire is well yes so this also has all the values great now what I will be doing is I will be going ahead and pulling this goal on my a single server so let's see how we can do that let me SSH into my easy to again okay so I'm inside my ec2 now and let me clone the code that I have pushed on to my github okay so now I have basically gone and I have copied the code on to my PC to machine and now I can go ahead and deploy the code over here okay so I'll just go into AWS - life and now I will function stall Python 3 so what I will have to do is if you can I'll be sharing this github with you I think a lot of people of you might ask this question so sireesha saying outside network can connect automatically or we have to do mine please we'll finish right now I have configured everyone to connect we'd have to worry right and what I'll do is I will just put this github link on the chat so that everyone of you can have a look at the code ok I've done that and people on YouTube you can actually just go to this link which is which you can see over here and then you will be able to see the code as well ok now that we have the code with us on our server yeah I was going to the read so according to read me we will have to install all these things so we have already installed MySQL client you can find all the commands over here which have to be executed on your server right now we will have to install Python 3 we'll have to install flask we'll have to install PI MySQL and we'll have to install photo 3 so what are these commands so basically Python 3 is the you know is the linkage that we have ordered a website in so this is the language that it has been coordinates we all have to ensure that it is existing on the system where we are basically you know running the website flask is the web thing which basically helps Python to you know go ahead and publish a website onto that service and my MySQL is basically a library which helps you know the website to connect to a Meister server then you have something called as boo to 3 so boo to 3 are the AWS SDKs that are development kits which basically help you to connect to you know your s3 service where you will be uploading your files ok so these are the things that can be installed so let's go ahead and install it and for that what you have to do is just cour your server and first let's install python 3 so sudo apt-get install python 3 so python 3 has already been installed next thing is that you need to install it 3 so sudo apt-get install at 3:53 ok so it has to be PI sin 3 - pip ok so now it'll be install on this server as well so it'll take some time let me see if we have any questions ok no questions so far ok I believe everyone is following along in that case if there are no questions all right so now let's wait for this installation to get finished so what we're installing right now is pip so papal is nothing but a package manager for Python which helps you install any libraries that your code might need so it's got coke installed and now what we can do is install the packages that I required should be pre-installed by minus 12 and we need book a theme that will automatically be downloaded now for the code and we also need to install plus 2pik 3 install flask ok so that also has been installed now what if we try to you know connect to the website the website will get launched successfully but we will get an error let me show you how to solve that it ok so now my exit got deployed so now what we were stream on the localhost if you go to the ec2 that we deployed which is this and if I right go to this IP address you can see on this IP address I am now able to see this website but let me show you a problem that you might get so let me enter my information primary schools let's say it's AWS location let's say it's India now we choose a file or upload to s3 let's choose an image which we can basically upload click on update database so as you can see you've got an error which says unable to locate credentials okay and if you go to your s3 management console and inside a bucket that is add employer you will not see any object or any file uploaded over it now how you can solve this particular problem now in order to solve this problem what I'll have to go do is you will have to basically give your ec2 instance or your server access to basically the upload data to s3 now how you can give access to your AWS instance first of all your question should be why does your server need access to upload data to s3 so on the server we are running some code and that code is trying to interact with the AWS s3 service okay now in terms of when you when you are connecting with RDS you have passed in a username password so that it all it's all good it had called the authorization and now it's able to basically enter information inside the database but let's now assume that instead of let's now assume that what is the authentication that we are giving for connecting to our s3 service so there is no authentication right so for giving the authentication to your essence service what you have to give is an I am role to your instance and how can you do that so there is a service in AWS which is called I am select this source and the service now I'm gonna put real users not use the soil I'm gonna go to roles and I'm now going to create an admin rule for my AWS account ok so when I click on create role it'll ask me who which services this role for right so this is a rule for my ec2 service so I'll select that ok so once you have selected easy to next it will ask for permissions so what kind of permissions do you want your ec2 to get so when you say permissions now you're giving access to different services and EWS ok now for this demo sake what I do is I just select administrator access that is this easy to can actually interact with any service in AWS ok we'll give it admin access we'll click on next and we'll click on view review and let's give this rule a name let's call it as AWS like ok and now let's click on create role so now the role got created and now if I go to my ec2 dashboard now I will have to select myself this is my server human project I will click on actions and now I'll go to instance settings ok and in instant settings I will go to attach or replace I am role I'll click there it's right now it is not having any rule now I'll give it a role which is basically AWS life which is over here and select it click on apply and the ec2 now have the correct role to basically upload data to s3 now let's see how we can do that so right now I'm getting this error that is unable to locate credentials so what I will do is I will just try to connect to the website again enter the same information so now let's change the employee ID let's entered John Doe primary skills either to s location that's it's India image that's choose an image that we want to upload this is the image that I want to select let's click on update database now so now me my image is getting uploaded and as you can see it says following image has been added to the database right now if I go to s3 and if I clicked on refresh over here you can see a file has been added over here and this is the exact file that I chose which needed to be uploaded to s3 at the same time if I try to connect to my maestro so let me connect to my scale from my local ghost so let me just check one simple thing guys give me one second okay now let's to connect to our IDs so my RDS has this URL let me pass this URL isn't the username let me pass in the password okay let me use the employee database and let me select star from employee now so as you can see earlier I entered human Shama EWS India but at that time my image did not get uploaded because the credentials were not there this information got inserted and similarly my John Doe data has also been inserted successfully now let me do a one thing guys I just give this IP address to you and all of you can try entering your information here and this information will then be reflected in my database so I'll just give this IP on the check on my GoToWebinar and you can go ahead connect to this website and enter information over there and then you would be able to see your data on the - colostrum okay so once you have done that just type in yes in the questions and then I will just go ahead and show you guys that your image also has been uploaded to voice 3 and your data is also being reflected on my scalp okay why do you do that now let's move on to the next step so this part of my architecture is done my ec2 is now connected to RDS my ec2 is now connected to s3 we have our website deployed over here now let's see how we can basically route a domain like this to my easy to server so right now we are trying to connect using an IP address right but I do not want to connect using an IP address what I want is I should have a domain I actually have a proper domain which can be used to connect to my website now how can I do that so what in this what I'll be doing is I will be going to a service called route 53 in AWS so let me just type it out this is the route 53 source okay so and here we will have to create a hosted zone okay let's create a hostage on click on culture tone type in the domain name now this domain name guys has to be purchased by you guys okay so if you want you can actually purchase a domain over here right it says a.com account is $20 you can just check all these things over here and any domain that you want just enter the name here it will check if it is available or not and you can purchase it straight from the ELab lowest management console all for demo purposes what you can also do is you can create a free domain so I have created a free domain from a website called phenom so let me show you how that website looks like so just go to free Nam Kham sign up yourself over there and then what you can do is you can create your own domain name right all you have to do is once you're signed up signed in click on services click on register a new domain okay so when you click on register a new domain it will basically just ask you the domain name that you want to and you know basically availed for free so let's say I want to avail hello world Intel apart let's say this is the domain that I want to select so I'll just click on check availability and if this domain is available it will tell me that it is free and it is available right now and just click on get it now and see it selected I'll check out again it should be valid only for three months guys remember this if you have buying it for free it will be valid only for three months click on continue and click on complete order once you have agreed to the terms and conditions so now once you get to this order confirmation page it basically tells you that you have bought this to me in successfully now what is services click on my domains and you will be able to see your domain over here this is how you basically subscribe to a debate on free norm now what you'll have to do is you will have to select ewi ok so now I already have had a domain triad or follow the same process for it it is exactly the same in the same state I have not configured this domain to do anything I'll be showing you the configuration now ok so I'll be going with a head with this particular term EWS - project or TK let me click on manage domain and from here in manage to means I will have to go to management tools and I will have to go to names flows once I am on name servers I have to select use custom name servers and then we will have to fill out this information I'll show you how to fill out this information in a minute let me see if we have any questions ok Nagamani says he has entered some information ok Nagamani let's check if your information is there so let me see in the SD service first if you have uploaded any files so yes there are some files being reflected over here right and now let me check in my database if I have any values so select star from employee and yes there hasn't been an entry from for the name Omega and there's also an entry for Arjun so I can see two guys have updated their information great guys so you can see your information on the screen now alright moving forward now let's go ahead to my and let me show you now how to enter this information okay so now what I'll be doing is I will be going ahead on my route 53 management console and I will be creating a hostage zone so I'll click on create hostage on and you have to specify the domain name over here now this domain name will exactly be the same as what you have specified in your free norm so I have my domain name as AWS - project dot TK okay we'll be selecting this click on create and then you will reach the screen on route 53 now these are your name servers guys that you see over here and these are to be filled out over here in free gnome okay so let's fill these out so what I'll be doing is let's select these and select these name servers one by one so let's select select the first names over copy it paste it here let's go ahead and select the second name server now copy it and paste it here select the third name server copy it paste it here similarly the fourth name server which is this so there are in all four name servers that EWS gives you and you have to copy all the four in your phenome dashboard okay once done click on change name servers and your change I've been saved successfully now you're free non domine can connect to your router router p3 service correctly trait now you have to connect your route 53 service to your ec2 server that you have deployed let's see how you can do that so now you will have to click on create record set alright specify you know an IP grass over here and that IP address will go basically here in the value so let's select are easy to I P address which is this let's select it and let's paste it in our route 53 so here is the IP address we will not enter anything in this field right and let's click on create so your record has been created similarly create one more record set enter www and enter the IP address a my IP address over here and click on create again so you are entering two informations over here one is with www and one is without ok and you have basically forwarded this to your ec2 instance IP address now if you go ahead and type in AWS - project dot PK on your browser it should take you to your website so all of you now you can go ahead and type in this URL and you will be going be able to access the website that we have just launched so just go ahead and type in AWS - project dot ek on your machine so let me also put it on chat just type in on your browser and you should see this page that is visible over here just confirming the chat dies once all those who are there in the webinar on YouTube also there is just type in AWS - project dot PK and then you should be able to see the website please confirm us in the chat so that we know that it is working correctly okay it is working for Nagamani are those guys please try it out Rami says it's not working for him okay Ramesh just type in www I think it should work out okay so with this guy's we have successfully I know configure a website let me also try it in incognito once so that we know this is not something which is being picked up from my cash so aw is project dot TK and then we'll type in www.youtube.com/lehrenhollywood so madhu says it's working remain still working with www okay guys remain in some time you can also access it on without w w also because since its dns sometimes you know the settings it takes time to be implemented across all the DNS servers which are the four DNS servers that we define every time each user does not connect to the same main server everyone is connected to different names it was based on the load which is there on the soil after some time even AWS project or a PK will work okay so with this guys we have come to an end to our AWS session right so I just showed you today how you can go ahead and deploy your own website end-to-end on AWS without worrying about you know how you have to deploy servers what settings you have to do so I have showed you each and every step in this video have also showed I mean shared the github on the webinar right so we can actually go ahead and you know pull the code by yourself and try this on your own too now tomorrow guys we are again going to have this series today we had this for AWS tomorrow we are going to have this for God so people who are watching on YouTube people who are there in their Banaras if you want to register for it you can actually go on to teleport dot-com slash Academy slash webinar and you would be able to register for the upcoming webinars as well okay so you can go ahead and register for it and if I will be waiting for you guys tomorrow and we will have the same exercise tomorrow is there for Azure so okay guys with this I'd like to take a leaf from your Hall now if you guys are interested and if you want to pursue learning AWS further you can actually go ahead on our website and check out you know the inter bluest course that we have if you are interested you can enroll for it right you can also call us on the numbers that are displayed over here under the website if you want more information about this course or let's say if you are interested in some other technology we will be helping you out in that as well right so on this website of ours which is basically of the course we also give you free linux training now because i understand most of you today will not be from a linux background so we understand that for all our customers and what we do is before enrolling you in to any other batch for Solutions Architect we also teach you on the linux technology itself so that you will not have any problem while you are transitioning yourself into the Solutions Architect role in your career okay so with that let me also show you the website before where you can register for the webinar so you just have to go to in telepods comm slash academy and then slash webinars over here you will be able to register for all our upcoming venez if you are interested okay having said that guys now I will be taking a leave from you so as you can see of the webinars are listed over here you can actually go ahead and register let me just put it on the chart also over here you can register for these webinars that we are going to go ahead and conduct tomorrow okay so with that guys I will take a leave from you all I thank you all for joining in today I'll be seeing you tomorrow in these webinars again I hope you guys have learned something new today and if you have please put a like on YouTube guys if you have learned something new today and if you feel you know you want to learn more about database you can also check out of course you know which is a Tintin epic calm and have a look at whether it meets your Korean each or not okay so with that good I will take a leave from you all I thank you all for joining in today have a great day ahead and good bye you

Channel: Intellipaat

Views: 14,709

Keywords: deploying end to end website on aws, integrating EC2, aws route 53, aws route 53 tutorial, aws route 53 tutorial for beginners, what is aws route 53, what is amazon route 53, route 53 aws, route 53 aws tutorial, amazon route 53 tutorial, route 53 features, why amazon route 53, aws tutorial for beginners, aws tutorial, aws training, aws training for beginners, amaazon web services, route 53, 53 in aws, intellipaat

Id: oWf6hH4iRP4

Length: 60min 13sec (3613 seconds)

Published: Sat May 23 2020