Demolition hammer part 1

hi my name is Scott I turned around and said in my last videos about the hammer drill that I get ready to show you what the demolition Hammer we got I just received it today and it came in two boxes came in the brown box plain simple and then it came in the actual original packaging and what I have here is the hammer drills the hammer demolition Hammer it's case two plastic tubes the Chisel the spike and I also purchased the Spade to go with it this is a 2200 watt 1400 beats Stark demolition hammer and it coming upon the spunch it also comes with your manual spanner wrench for your oil two bushings two Allen wrenches I just put oil in this container it normally comes in just plain simple okay now when you get into it make sure you're inspected folks make sure it has oil in it and how you check it is you stand it up on a on a stu you have a sight gauge and if it does not have any oil in it which it shows none we have to put a little oil in it before we actually start it now how to do that is simple you take the span wrench go over to the glass unscrew it take the cap off take a little bit of oil make sure that you get enough in there now it does come in with at least about half an inch to an inch and oil you don't want too much screw it back on make sure it's tight lift it back up and you got oil that's how you know that is that is operational it has to be within the half or the full glass other than that that's it now this piece of equipment comes with a 360 swivle trigger locking the mechanism so when you pull the trigger back push the button up and the trigger is now locked in place so you do not have to hold it with the finger all the time unlock it by pulling the trigger back [Applause] your bushings are located on both sides with the black container Tes fill head screwdriver unscrew that's how you check it now it's got a little grease that normally comes with these how you put these in is you when it came this way as you can see slide it back a little bit it's already open all you do is take the pin switch it back now the pin's left that's it same way with a shovel and by the way this is a very heavy shovel interesting same way slide it it in and that's how it works now I haven't tried it yet but uh we're going to be doing some heavy demolition tomorrow if you looked at my last three videos I posted we did a sidewalk uh I did this on a heavier drill and a heavier uh demolition Hammer now we're going to get instead of Renning one we decided to go ahead and buy one because it's a lot cheaper now this only cost me not much on Amazon and like I said before Amazon does have some decent prices I did on the uh rotisserie the rotary hammer drill um part one two and three you can check it up on my site uh please do leave comments if necessary um give us a few moments we're going to pause this and turn around and get ready to do some little bit of work on it show you how it works thank you everybody already knows what the demolition Hammer does with the ball and the and the Chisel we're going to go ahead and try out the shovel we're going to see how really this thing Grows by the way the handle is 360 it does not tighten down all you do is have to move it around we're going to see what this does I believe that's going to be great to pull out roots get ready to drop some post in the ground and it moves smooth smooth as it is as you can tell before we did the Spade instead of the other two both these right here are actually 15 1/2 in Long long this right here is actually 17 1/2 in long and as much work as I plan to do tomorrow with it we should be able to knock out the drive uh sidewalk very quickly and less time than expected before this is very inexpensive it is made out of metal so it's worth it um folks I do thank you if any questions any comments please leave them on the site and I will return them thank you thanks again

Channel: Wolvesr4ever38

Views: 164,129

Keywords:

Id: hsJct27snbM

Length: 6min 30sec (390 seconds)

Published: Fri Jul 08 2016