This time we will customize Daiso's micro stove. The price is 1000 yen, and it is made compact and lightweight. Then we will open it. The bag isn't very high quality, but it's rather large. It seems that additional parts can be added in the future custom. The main stove is also compactly folded and easy to assemble. The door is designed not to open double doors in the original specifications. Because there is a part of the arrow, it does not open. Therefore, if one door is set to the outside in advance, the door can be opened as a double door. There is a distance from the roaster to the upper cooker in standard use. Solid fuel and alcohol stoves will not have enough heat. By the way, this is the distance for pocket stoves that use solid fuel. Therefore, we will use the holes in the cherry blossom petals to adjust the height of the rostle. Use a screw with a diameter of 4 mm and a length of 10 mm Install the screw in the hole. With this, there is no problem with the thermal power when using solid fuel or alcohol stoves. There is no particular screw interference when storing the roster and folding the stove. Next, attach the stand to the side of the stove body. The parts are net hooks and nets for Mestin sold at Daiso. This time, we have prepared nets for Mestin for 1.5 go and 3 go. I will put a Daiso iron plate on the stand. Then we will assemble each part. Next is a custom firewood specification. The material used is Daiso's mini iron plate and a wire with a diameter of 3 mm. Since it is a firewood specification, the rostle is lowered. Firewood uses about 30 cm. I will store it. I will check the combustion of the micro stove. The height of the flame of solid fuel is also moderate, there is no problem. Next, switch to the firewood specification. Firewood can also be stably put into the stove. I'm going to make a bonfire dish on the other hand. There was no particular problem in usability for the three customized parts, and it was well done. Clean it thoroughly and check its condition after use. There was no damage to the custom parts. In the firewood combustion, it was a considerable flame, but there was no big damage to the microstove itself. This was the introduction of the custom of the micro stove. It was a good stove where you can enjoy a wood stove at a handy price.