Back From MRRF and Printing ROOK parts #livestream #3dprinting

foreign [Music] [Music] [Music] hello hello hello are you ready are you ready oh look at that we're in proper resolution and not crappy really crummy uh bit rates and audio we have audio quality and I'm looking at the wrong spot constantly um as you can see we are in the middle of moving stuff 's different We Fear change it scares us but yeah um Aaron mccurd things have moved I have so many revos why do I have so many revos what is this for Logitech okay don't lose that um Cable's all turned around I know and the camera's still in the same spot I gotta fix the camera this this camera angle ain't gonna work I gotta I gotta move the camera like out more but I do have the overhead camera that's not the right button that's the right button I do have the overhead camera so we got this going which is nice um so everything this is everything's kind of moving here um because the garage is gonna be a mess for like a week until hopefully Saturday um so I figure you know what we're just recapping Murph um so even though this room is a complete disaster right now believe me you don't want to see the floor um we'll just stream out here we'll just stream out here today uh because we're just recapping Murph basically um so yeah messy workbench oh it is really messy because I had to like rearrange because I had all the monitors on this side and now they're on that side and also uh we're gonna play uh Blues Clues here or not uh Dora the Explorer if you see a cam link point it out because somewhere on this desk there's a cam link I think and I don't know where I put it and it's uh it's got me a little worried because I found one of them because I brought the one and I don't know where I put the other one um so I don't know if I like oh I'll put it here for a second and then I forgot where I put it I have a feeling I did that I have a feeling I I like oh I'll just put here for a second and then it's gone so uh yeah that's always good to know um so yeah we're back for Murph there hasn't been a stream in two days I did try to stream at Murph twice um the Wi-Fi was no that this is just the normal thumb drive um the wi-fi at Murph was um spotty at best and with my setup it wouldn't Brown out basically it would just cut the stream which I couldn't work with that I would have to so I tried relaunching the stream again and then I tried the next day it yeah um also my voice is still I don't know if you can hear me my voice is still pretty shot um I'm not able to project um too well uh my voice is kinda so uh oh you're a high flow okay where are you your box um so I don't know how long we're gonna go today hi Steve um which one are you one mil cool um so we'll see how long we go we're just basically recapping Murph I've got a bunch of pictures and video I I don't know if I'm gonna I I should be able to do one video for Murph itself um but it's gonna be like an overview video because everything that I would pretty much do a standalone video on I've already done at Rocky Mountain or at rapid and I still have Rapid Videos I gotta edit um so yeah yeah it looks like a USB flash drive um here let me show you the one so this is the problem I had both on the desk and then I moved everything and now I don't so this is what a cam link looks like and it says cam link on it um that was the one that was in the garage I had the other one on in here somewhere and I don't know where I put it and I'm hoping it didn't like fall on the ground and disappear um and no I didn't put in my pocket so um by the X1 Carbon no that's a uh an SD card reader I know I I saw that myself um so yeah uh it's good yeah it was good chat anyone who said hi uh it was great talking I'm not a huge I I don't know it's always different in person um but it's always fun to meet and chat with everyone uh you posted the manual I so that's one thing we got to do today uh we gotta print The Rook um so that means I gotta get all the files for it and we gotta slice it all up and if I'm not mistaken there's really not a lot to The Rook um so I've got two choices here for color um I was gonna go with um this sparkle dark orange ASA that I got from uh Sparta 3D so this is a sparkle dark orange ASA um I kind of like it but technically the rook's supposed to be printed in pla right if I'm not mistaken well I was uh chatting with cookie CAD um and they hooked at Murph and uh they hooked me up with a spool of this stuff which is called uh dual unicorn foreign so we might use that for The Rook go with the Unicorn that's what I'm thinking and uh that was a very easy discussion so let's actually download the files um for this so also I'm going to be looking all over the place because my my main one is here so my main mountain is where my second one is and it's all over the place um the only issue I'm worried about with silk is layer adhesion um so I probably honestly will do the ASA it's it's layer adhesion with silk it's always a little um so let's see here yeah there's not a lot I I was honestly thinking of doing a um where's where's what I was going to use for the accent um not lavender uh do I have the dark oh I got the yeah I got this um if you're gonna do fluorescent pink or oh here we go that's what I was gonna use that's what I was going to use there we go um purple so purple and or actually this purple is too dark that purple doesn't work that no no the cam link was in this room the cam link that I have is the one I brought with me that purple's too dark uh are you pla you're ABS good Sparkle orange and purple purple and orange what goes good with pert orange purple and orange or green well I know ABS or ASA is fine it's just kind of like designed with that in mind okay um orange white we've already got that we've already got big papa Joey P which already has that color scheme here's the Rook okay um so I'm gonna prefix this now I'm gonna I'm gonna I'm gonna say this once I haven't built the printer yet so when it comes to asking um my thoughts on it um what I think about like if it's a good I I assume it'd be a good core XY for a beginner It's relatively simple but remember I haven't built the printer yet we haven't even printed the parts for it I got a box with a bunch of bags in it that's the extent of my knowledge with the rook and then we'll keep seeing it so I know as much as you when it comes to the build unless you've built one already in that case you know more than me uh or it's my mouse where's my mouse where's oh here it is okay um so where is the link to the files where is the link to the file version shown mods by guccifer or goalsifer golcipher okay which what is there like a GitHub link for this uh but is there an all-in-one Bishop posted in the fabrico Discord okay let me find that there we go okay so let's download this whole thing also why are you zoomed in okay look at midnight so this is everything so um is there there were test pieces I believe that I should be doing first if I remember correctly I remember seeing somebody was saying something about test pieces oh yeah that ain't gonna fit what's my go-to it depends I I use whatever um with the vorons I still tend to stick with super slicer because that's what I have set up for it um but like the newer builds like the uh Rat rig here I I'm using uh orca uh test pieces there are because so the thing with the Rook for those that have never built a rook before um a lot of it is like like press fit so like these rods have to really fit well wow I gotta re-center this camera uh where am I oh there I am there we go there I am um the rods that you see here are uh they they fitting is critical for a lot of this um so you may have to fiddle with some of the sizing um so I thought there were test pieces though I need to get a different Mouse this mouse ain't gonna work it's on printables okay does anyone have a link if anyone could drop a link for it in the Discord uh for the test pieces that would be much appreciated tools on the thing okay so let's take a look Rook uh walk one roller hand design there we go Okay so files Rookery tools there we go tolerance test so what I will do is we will print the tolerance test with this orange here and see what we get okay so that's how we're going to serve so I'm going to use the orange ASA um because I want to use orange or it's either that or a blood red ASA a blood red sparkle but I kind of like the bright orange oh yeah oh yeah yeah I like that make sure you scale it well that's why we're doing the test print to see how it turns out and if it don't turn out well then we'll fix it before we print all the parts oh that's hot that's the bed turn the bed up there we go let that heat up um and also um although we're not using it I probably I might be using this stuff this is polymaker do you yes you do you want to win a spool of polymaker filament we give away a spool of polymaker fill in every live stream Link in the video description for your chance to win you did your work with abs ASA no print okay do we want to do after dark oh yeah after dark Works in this light angle what is this guy nozzle obsidian obsidian link to GitHub and the Discord cheers um I've already downloaded all the files there we go nice setup it's a disaster right now this setup is not anywhere near what I would call um finished we gotta we gotta move a bunch of stuff like this camera I gotta fix the camera this camera angle doesn't quite work I Gotta Have It a little bit this way um we'll see but I can't have it stick up too far uh because then it it's actually in the way of the room um and the last thing we want is somebody bumping the camera that would be bad foreign there we go uh PF Dennis 55 community memberships cheers I'm out of focus yeah it's an autofocus yell at the camera okay there we go cool Okay so I'm gonna print it at my normal settings right now and just see what we get and then we'll we'll go from there and then while that's doing that we'll talk about Murph there we go um yeah rotate a bench yeah I know it the thing is though it actually eats up a lot of room um I have what is that 24 inches 30 inches roughly I've got a little over two feet here then I'm walking down um there's a bit here there's some room here but from like the bench to the wall is like another three or four feet so this basically splits the room right in half but we won't be doing builds down here as much in the future so in fact all builds should be out in the garage now just stay skinny working on it what I'm working on is where the hell did my cam link go that is annoying the heck out of me maybe I put it in here I don't think I put it in here because this is not cam link stuff no no it's not in here no I mean it's cam like it can't go too far don't think I threw it out that would have been dumb uh I download the files from the GitHub because this is a modified Rook for the fabrico kit you think resin printers will ever get to nope resin will never ever be as popular as widespin as fdm simply for the fact that resin will kill you or at least give you cancer which will kill you um also it's a complete pain in the ass to work with and a lot of the times the final Parts the results um aren't anywhere as usable as fdm nobody builds printers using resin parts for a reason and there are you know Niche cases where somebody thinks they do could do it and they try it and it might work for a bit but it never works as good as fdm so and if you're trying to drop me links in chat I can't see them because YouTube does not allow chat links so that closed that that closed that there we go so let's uh let's go over Murph Murph where is that's printing okay garage Renault import Murph you large icons let me get rid of these because these have personal info delete cool okay um good for minis it is good for minis um resin here's the thing hi do you like pissing off Games Workshop lawyers get into resin printing um resin is great for that resin don't get me wrong resin does have its uses however more people will get more out of fdm reson is pretty Niche and also it's an absolute pain in the ass to work with and it will give you cancer um so yeah I gotta Swap this key out because that's the wrong key whatever what do I have a zed instead of an a key I would download a car me too a there we go I put a bunch of A's somewhere so yeah resin is toxic as um it's a complete mess to work with I have resin machines as you can see I use them for storage what about km fdm what's that present sports are paying resin supports are quite easy in my opinion like this Lilith bust um this was resin this is a resin print okay um and I printed this I want to say like this this orientation um so all the supports were on the back and they just went and it peeled right off um they do leave like little marks though little oh man getting useless camera um they do live little dimples and pop marks when you peel them off but like you know being able to print in this quality kind of makes up for it so resident is way worth yeah resin is not good for you resin is full of the cancer we don't like cancer cancer is bad cracked after a few months yeah that's the problem with resin resin will crack pretty much that's that seems to be the big problem with resin is resin has a habit of cracking um especially when under stress or um as uh you know under pressure too how did I lose a cam link like seriously how did I lose a cam link um you can go over here like seriously how do you lose a cam link how's it going it's going good so anyways let's talk about Murph because that's printing it's doing a test print so we're going to wait for that to go um so I've got pitches Nvidia so I I was I was all fancy I took my uh took my Helios lens for that there we go Focus I took my Helios uh 44.2 old Soviet lens um I took that with me to Murph and I took some pictures I probably should have taken more but I took some pictures um so this is Dave's uh Dr Dave's uh Legacy that was at Murph this is all printed in hips do not print your foreign out of hips it is a bad idea it cracks a lot um so I took a bunch of pictures of that um this was also his other Trident I took pictures of printers that lip lighting that would like look good on this camera um focusing this camera it takes some getting used to so uh there's Mitch with his Delta there's a mini or v0 chocolate brass cocoa press can't wait for it uh training kit uh Ben heck was there and he brought his MakerBot so I actually had a nice little chat with him and it's funny because like he's YouTube he's he's content creator famous but he's like old content creator famous like I remember watching a video of like him modding like an N64 into like a a portable thing or something like that like decade ago um so it was cool to talk to him I just you know I he's probably building a war on now um uh this is a Annex K1 I believe uh usbot this was cool this was like a printed boat for like d and d and stuff like that minifigure stuff Yolandi if you've been to Murph you've seen Yolandi Yolandi is creepy that is all you need to know uh this was cool because it all like lit up and everything it was hard to capture the effect the polymaker uh some prints but he had an Iron Man suit I actually talked to the guy unfortunately I didn't get his name or anything um but uh yeah this was an Iron Man suit he was wearing it walking I got some video of it um a rook and then also the autofocus printer here is a legacy but it's like a printers for ants version of a legacy so it's like six millimeter belt or six millimeter rods uh Visa bot or is this a zero g that's a zero g uh a buck bucket of duckies bucket of duckies an R2 unit train a spool of filament look at that spoke though look at the bokeh and then another printer another Boron all the vorons and I think that's it for pitchers I took a lot of video so I've already made one video so I'm just gonna play this video um because you guys will get a kick out of it so we uh we brought those Nerf guns and then we uh we shot at um a tiny wolf with them among other things we'll get to that later so we actually were hitting it quite well like it took a bit to kind of dial it in um these things are stupid accurate though but it's mostly just leading like they're they're accurate but they're like within a foot accurate like this distance so it's kind of like when you're aiming at a little tiny whoop it's kind of hard to be bang on but if you if you hit it like dead on it would drop foreign yeah the kid there I thought he left but I guess he went back and sat down and then we knew tunnel vision we didn't see him again we didn't get hit or anything so um the tiny I don't know if that time that's that's just an off-the-shelf tiny but that's not a built tiny whoop that's or like he might have built it I don't know but it's an off-the-shelf tiny whoop it's not a printed one uh I can only have one printer that one but that's kind of like I'm not getting I'm not ever going down to one printer so one one is two is one one is done the best printer is always more printer but yeah that was a tiny whoop like this one um these you can you can they they you just beat the out and they don't care um what else do I have videos of uh the drag races so um voron battlebot when voron battlebot now um yeah they they took this guy out for the uh the the to the death portion of the uh death Racers and this thing completely just is Bonkers this is a first robotics like chassis like you know the the high school first robotics they they built one and then they put a voron on it and um it will print while it's doing this it's not printing right now because I think they're having like brown out issues due to like a inverter or something um so they didn't try to but it can print while it drives around um and it it will it it it books It Books um yeah um what else so that that was really fun we also had uh me and Steve were also trying to shoot the heads off the the death racers so this was fun we were shooting the heads off the death Racers or at least trying to we never I don't think we actually killed any um except for one I did kill one uh after it died one second here but yeah we we went around and we were shooting them all um the problem is the darts don't have enough um Mass behind them to uh take the heads off um you need a bit of of power to take the heads off one and unfortunately that we were hitting them they just the heads weren't coming off um but yeah that one was nuts that had um this one here had a um ah shoot what's it called they had like the wheels that are Omni Wheels I think it was so that one could drive around sideways it could drive sideways and do like crazy turns and whatnot how's that print coming oh it's coming good yeah so this could this one could turn like sideways and whatnot yeah you could see it doing that there it had Omni Wheels which was nuts but it ended up like splitting in half and I had to go finish it off [Music] and then the house robot came out so it's funny it comes out and everyone's like oh it's not that powerful so it comes out and you're like oh that is just that and then it started spinning and then it started smashing stuff and Steve's trying to take it out there are a few darts in it oh Sam's there hey Sam [Music] like this thing just thrashed them and it just body blows just straight up body blows so the problem was people kept like walking in because they were like they would throw a tread and they would walk in there it's like no you have to stay away from that thing that thing will kneecap you laughs uh oh here's the Iron Man guy here's the Iron Man guy uh it wasn't printing while smashing um it had an issue with like brownouts or something so they didn't they did it it can but they just didn't and that is running the bed at ABS temps by the way [Music] so seeing that I I really want to finish my Mando suit now um what else do I have I don't want to show everything because I'm going to be making a video of like all the highlights um oh here we go um so I I know it's kind of a thing but I God damn it Annex engineering that came out with a printer that I I literally cannot say a single bad thing about um they they've outdone themselves um and I will never poo poo the annex name ever again um because foreign mental being mental clipperize the pancake bot this is the greatest achievement NX and Engineering will ever accomplish this is the high point of their Development Career is a pancake pot running clipper and they did PID tune the bed so The Griddle bed is actually controlled by the printer it's PID tuned with the 25 amp SSR that is screaming hot ah [Music] so yeah that was cool what else oh this was cool too um Auto pressure Advanced calibration using off-the-shelf lasers and a camera so it it does a pa uh pressure Advance like test print and then it measures it and then it auto calibrates your pressure advance um using off-the-shelf components and the folks at uh who is it go read their paper on it um alchemical 3D um the the the guy who did it wrote like a whole research paper on it um it's kind of the same thing another printer uses um but they don't call it lidar because it's not lidar um and it's open source and it uses off-the-shelf components so and it works with clipper yeah it was a college project of his so Costco uses yeah Costco is a a pizza printer it's R2 drove around it did some things like it does like the whole um like pop all its stuff out and whatnot but I don't think it drives around foreign yeah I don't think this one was driving around at all he isn't hard it's not um but if you are using a lot of different stuff especially if you're changing nozzles often like different nozzle sizes and filament types it would be nice to have like something that can Auto calibrate it I tend to not do that so for me it's like ant but um same designer as it is oh okay then I didn't see it right around I did see the sand crawler though um sand crawler was driving around so this one was driving around uh what else I don't want to like spoil everything um the the the joy of Murph is after 6 p.m on Saturday when they kick um the public out and everyone starts enjoying Libations and then they get the idea hey let's take the chocolate printer and uh stay up till midnight modifying it and hacking it and uh and getting it to the point where um you could print um you could print with it so technically this gets a v0 serial sorta kinda I guess so yeah and yeah it does have a heatsink fan you can see the Ryobi heatsink fan uh cocoa press it's a 3D printer that prints chocolate [Music] um go pre-order one I've got one pre-ordered I can't wait to build one so yeah uh what else what else yeah I think that's like all like the big like I I've got a video I'll be doing a video um this was this was recorded with that Helios lens I really like it for this kind of stuff it's like creamy looking like it's everything smooth so this was with the Helios lens a bunch of the stuff with with the uh just playing around with it train so that was fun that was fun am I gonna put the the cocoa press the cocoa press would probably be in here so um we need to figure out some stuff today too because the plan is I completely forgot Friday like today's Tuesday then Wednesday then Thursday then it's Friday yeah um and then Saturday Sunday um Friday is the community Channel Stream So if you haven't had the chance enter uh the Discord um Link in the description go to the community challenge channel it's at the bottom there enter for your chance we do a um we do a contest every month chance to win some only benches merch like this hat um polymaker filament and all you have to do is print something summer related and post a picture of it or a short video and you could win something so you're printing stuff already print something summer related and enter it um so that stream will be in here okay um Saturday stream we start The Rook build um in the garage you all know how quality is in the garage we need to fix that so I'm either going to bring my streaming setup into the garage like bring the computer and all that up there or I'm gonna have to build a computer before this weekend and get some monitors because I was I I was smart I'm like hey I need a computer monitor I'm gonna go to Value Village um I don't know if Americans have Value Village but it's basically like a Goodwill type thing where people like donate stuff and then they sell it for um money essentially um for and then they donate the money I believe I think it's like non-profit or something anyways uh tldr um I went there yesterday hey computer monitor is cheap right 15 Dell monitor yeah there's a reason it's a 15 Dell monitor that that that yellow stripe um ain't part of the background um I'm kind of looking at right now somebody was nice enough to drop off I had a video I got a video card and I got a power supply um I have a case here recorder I've got a case hopefully I got everything I need for this case let me double check I think I have everything I need yeah I've got a case um what I need is a power supply or correction what I need is a motherboard a CPU Ram and like an nvme Drive um so right now Newegg you can get a ryzen 4500 for like 100 bucks eBay so here's the problem with buying used the cost for a use system there's like a break where it's like entry level new costs as much as mid-tier old but it's better especially anything like pre-tenth gen Intel like anything like back when they were doing like the whole i5s don't get hyper threading uh um oh bulldozer I do need to sort out Heating in the garage but that's not the way um I could have brought somewhere Ram is cheap it's like 40 bucks for 16 gigs of ddr2 ram ram went down in price um so I've got it all in my cart right now um a 6700 the problem with the 6700k um and 2700k is it's a dead end platform so that also means you need old Ram you need ddr2 RAM like it's like an I3 12 100 will blow them out of the water for 100 bucks and you also get modern you know USB 3.0 USBC PCI Express four like you get the modern stuff so yeah go AMD um I I might so it's either an iPhone I3 12100u or f um which is I'm probably gonna go with the ryzen though because that's a six core uh ryzen 4500 and a b450 motherboard should hit up a Micro Center I looked online um the deals weren't great it's also am4 is also dead platform that is true however um it's only one generation dead and also you could put um up to a 5800 X 3D in there which is a banging CPU still all my current computers are am4 main computers are 39.50 the this computer is a 3700x the my unread server is a 3100. every platform is dead two years after you buy it so at least you could still buy it new and it has modern stuff and I think you just don't get PCI Express five are they on five already I don't know um so yeah I might buy that it's like 300 bucks and then I get everything I need and then we build it so I'm probably gonna do that hopefully it gets here before this weekend though uh that's why I also need to find the other cam link damn it I wish I knew where the cam link went so that print's done it's a new t-shirt uh no this one was fabrico made it for me uh for uh Rocky Mountain [Music] orange I need to get my box of parts I'll be back in a second also um while I go to the garage have fun guessing what's in this box if you don't already know what it is okay going for a walk going for a walk okay is the camera link out here no I don't think I have any info there we go oh God if you know what's in that box you know Micro Center I don't live near Micro Center if I wanted to go to the Micro Center I had an idea to go visit the one in Detroit but it would have been like way out of my way to go there because it's not like on the way home for me or it's not on like the normal way home so I didn't go foreign rods do I have a knife in here I don't think I have a knife in here no they're in the garage shoot I hate to always calibrate my Clipper I can slap one of those things you shouldn't have to calibrate your set offset it should be a one or done thing um your z-off set should be the same and then it just does a Bend mesh on on uh before the print would Cleveland been on the way home new I I I was pretty much all Michigan the whole time yep okay so um how does this work the rods got to go in that is too tight yeah that's that's that might work um that was an M3 and a hexa I got a feeling we're gonna be doing some scaling or not scaling uh some adjustments here actually we're okay that's good we might be okay we might be okay oh yeah we're good we're good I just got a little elephant foot I got to take care of yeah my first layer squished a little bit so I just need some elephant foot or change my Zed offset we're good we're good okay keep you hot heat the bed back up we're good we're good what slicer am I currently using yes depends on the printer some of you super slicer some I use Orca slicer some I use per slicer link to be the place you buy shop monitors from Power Systems is that in Canada a who they are in Canada they actually are in Canada okay let's see what they got products priceless sign up for our may I pray oh God you have to like do they ship at least please tell me they ship and I'll figure it out later is it running tap yeah it's also my Z offset's too low and I'm printing way too hot because this is that stuff and I need to play with my Taps so one second here thank you okay so now we need to print some parts boom support that takes up the whole bed okay it looks like we're doing the whole print one thing at a time because that takes up the whole bed and I only have one of this orange uh uh let me take a look at a rook should I print the bed in a different color I'm going to print the bed in a different color okay so bed will be in different color uh uh your mark IV kit so what color are we using for the accent folks what color are we using for the accent what color are we using for the accent hot pink I I mean I do have hot pink like I I do have hot pink black actually don't have black I gotta buy more black powder blue cotton candy orange white we already did orange white do a pull bloop yellow purple pink a lot of people want hot pink um that's pla that's also pla where's my pink is this pink is this ABS Sparkle fluorescent pink [Music] we have our accent color so orange and pink what do you guys think what do you guys think orange and pink here we go or green I do have sparkle green I do have a a nice Sparkle green foreign we'll do a vote so it's going to be one of these two people say in the green okay that I will print on this V2 which I'm gonna have to do a test print on here because that one is a 0.6 nozzle uh printers ldo V2 turn the lights on okay slightly there we go okay so bed 100 . oh extruder 240 bed there we go yeah we're doing carrot we're doing the carrot we're doing a carrot doing a carrot orange and orange and green good what do you have in there 0.6 obsidian okay don't worry we got a lot of builds coming up in the future we'll be doing a hot pink printer at one point believe that because why not plus it makes some people angry and I love that okay you're done as a spool Where'd I put the thank you um there we go the annex K3 and hot pink that's the plan actually whenever the fabrico kit comes in um we will be doing an Annex K3 in hot pink okay so turn you off okay so that is that I'm gonna print this with a Brim because that is a big piece I am printing it with voron settings so that's the top frame so everything else is accent Gantry that's all at bottom frame skirts ain't gonna fit bed support we'll do the thumb Wheels in here there we go no go in the center there we go it won't it won't put a brim on it because it's inside what are you doing uh print settings Brim brim is there a way to do brim inside holes there we go oh brim per object there we go what the heck where did that come from we'll see control Z what is what are you doing okay go away go away what what the is going on here control a delete everything okay open that there we go scale top frame top frame there we go slice what is it what is this is a super slicer doing [Music] what is going on with you super slicer okay uh yeah I know yeah we'll just hope these parrots don't pop off oh yeah and he's okay you know what in that case I'm just gonna we'll just not gonna roll the dice we're just gonna print this anyways print the big boy call it a day so that's what we call a bug yeah it produces slicer like super I like super slicer it's just there's like a weird thing so [Music] so we got to do this and then we gotta print the test piece again on that guy because that's got a 0.6 nozzle export G-Code save okay uploading oh nope not that printer printers that printer there we go I'm going to print top there we go okay so that should be printing on this guy [Music] now [Music] downloads clearance check slice now support save [Music] yep now we check that one yay now we wait for more to print so [Music] yeah the the only reason I haven't switched to like Orca on these machines is because I just I know my super slicer profile works when it doesn't glitch out like that um it's like the same profile I've been using since forever and I know it works so I just kind of leave it because I know it works so down here I really wish I knew where this cam link went because like I'm pretty sure I didn't throw it in the garbage because that would have been really dumb because I'm pretty sure I'm not that dumb I'm pretty sure I didn't throw a freaking cam Link in the garbage but I was throwing a bunch of stuff that was on this desk out but I don't think any of it was a camp link no yeah I don't see a camera okay so it's not in the garbage question is where'd it go where how do you lose a cam link how do you lose a cam link [Music] I doubt it's in the garbage oh you're like I know it's around here somewhere I just don't know where I put you in the drawer no I've got the knockoff cam link here so that's the knockoff can't link it's one of these like not great ones I know you're around here somewhere I know you're around here somewhere tonight did I no I didn't put you in here how do you lose a cam link seriously how do you lose a camera [Applause] oh freaking like seriously like honestly who throws his shoe [Music] no I don't use cam links in this room the reason I have two cam links is because I used to use cam links and then I I got the uh the Whatchamacallit the the cam link Pro USB or PCI Express hub so I stopped using the cam links but now with the trying to sort out the garage setup I'm like oh I'll use the cam links for now until the uh the Whatchamacallit goes on sale the PCI Express capture card because that's what I'm going to use in the long run is that PCI Express capture card but it's on it's it's not worth buying unless it's on sale but it's on sale right now I just don't know where it's not in the garage it's not in the garage and it's not plugged in everywhere it was literally just sitting like in this area of the bench and I put it somewhere and I don't know where it's in this room I just don't know where um I haven't tried that micro that wireless mic yet no I have not whatever nope nope nope that's gonna it's gonna be really annoying it's under the bench I don't think so I didn't hear anything fall and I don't see it I don't think I threw it in here foreign no just how do you lose a cam link how do you lose a camera oh that first layer is way too low I know the cam link the fact that they're black and they look like a thumb drive is kind of dangerous honestly Miss water where the hell I put it like it couldn't have gone far I put on top here no it's not with the cameras found a hammer Hammer's always good no all right this is this is like starting to like really get me a little worried because I don't know where I put it and I kind of need it tonight no how do you lose a camera like seriously it was sitting on my desk earlier today like I had them both and I'm like okay don't lose them and now I've lost one the frick top drawer husky actually shoot did I put it in the I did yay about it I put in the Kennedy I had it on the Kennedy that I had here that I took off keep it secret keep it safe found it yeah I put in the Kennedy here there we go but yeah these should be like bright pink they should be bright pink or something yeah because like that's it that's a cam link all it does is you plug HDMI in and you plug in your computer and turns your camera into a webcam paint it I don't have any bright pink paint I've got blue I've got blue blue this is brighter than what it is there we go cam links don't lose these so I need to buy computer stuff I need to buy lighting um printed TPU sleeve is this special I don't have gridfit any anything because I don't have drawers I have piles that's kind of my thing we have we have piles how's that green oh I love that green I love that green that's a big first layer cam link well I know what they are I just had to find them piles go away when you put them in buckets exactly all the buckets is hmm anyone else type one over Kyle if that's your entry that's wrong and if you get drawn that's the disqualifier uh what's your favorite daily driver printer whenever one has filament in it when everyone has filament that I need or in the color I need I'm not really like yes I have a preference for vorons but like you know I'm on the voron team and I have a little bit of a bias completely makes sense um but in terms of like brand loyalty I they're all good printers all the printers on this shelf I have no problem using even the bamboo I just have some issues with it get Ben heck of horn um I don't think you don't really have to worry about much I'm pretty sure Jason will just send him a kit and that'll be that because that's what Jason does uh what do you think of canbus um I uh I've tried it I fiddle with it I found it a little clunky at least the ones I when I played with it um I think it's better now okay do we want to do both lights or just the one not just the one I think um Can bus is still kind of funky in my opinion yeah you can run it yeah people do yeah people like it I just it's a little bit all right and you're kind of really reliant on the vendor selling you good hardware for it so there's an argument USB is better that is something I've heard because USB at least with Clipper is is simple you plug it in you you go where the cam bus is usually a little bit more finicky and involves specialized Hardware so here we're going to build one yeah um whenever a kit shows up hey look another cube in the garbage I have thrown away so many calibration cubes over the last little while it's ridiculous now let's play where are all my Allen keys see I made it home safe yeah the drive was actually it rained like crazy the whole drive home but the drive itself actually wasn't bad can bus about simplicities usb is pretty simple as is too there we go look Allen keys it's basically a frame primary natural accent that would be nice that's actually kind of nice and all the cable well the new USB standards with power delivery have no problem getting power and it's just USBC cable at that point hello you need a USBC cable that's uh rated for the movements you're going to be doing I really like the vzbot tool head um I'll be looking at it more once I start building one in a couple weeks here because um actually shoot let me let me check my DMs um I gotta message that guy how's this coming along we're good we're good a second one we good we're good USBC is not unlocking that is true however there are ways around that mainly involving a mechanical lock above the the cable so you would have the cable being like a fitting that holds it in place when it's in the the PCB that's what the Chidi does um let me go grab the the shitty the shitty sheety let's go grab the chibi or is the cheaty there's a cheaty there we go she is cheating okay I have a proper alley key for this foreign also manufacturers just because you think it's a bright idea to use self-tappers in the plastic to hold your tool head together don't do it that means they'll eventually wear out and then you can't put it together anymore am I satisfied with the any cubics no idea I don't have any any cubic printers the only any cubic I have is of resin ones which um they're they're fine like most entry level resins they're pretty they're very much dissimilar like I've got it it prints okay there we go okay so they kind of have like a little clip here I don't know if you can see it they kind of like ah it's hard to see they got like a little clip above it that when you put this on it kind of squishes it into place and holds it so it's it's not locking but it's a 90 degree and when you have the cover plate on it ain't coming out so that's how the the cheating tool head does it so it's you know USBC is not locking but you can mechanically lock it in place so that's really not a huge issue oh I'm really dark oh the white balance that's what it is come to form next uh probably not I would like to go to form next um so if you if you own a company you want to sponsor me let me know um voron will not go to form next because voran's not a company and form next boost um are many Monies several monies in fact quite a quite a bit of Monies to to get a booth at form next so a a free open source not-for-profit group um having the spare coin to justify a booth at form next is kind of one of those things that probably ain't happening so yeah I need to update the cheaty to the latest firmware I probably should do that it's but this machine's been uh a dust collector for a bit so maybe I I probably will update it once we get in the other room we're probably going to have a stream at one point where all we do is just update firmware and stuff like that um because I kind of want this to be one of the garage machines that I have in the garage because I like the form factor of this and I think it'll fit on the top shelf so I actually um God damn it this probably will be one of the machines in the garage that's what grants are for yeah it doesn't work that way also what we don't really have anything to show off that you know there'd be no point form next is not the show for vorons form next is nowhere near a show for foreign X is a is a business thing okay I lost a screw oh well whatever actually might still be in there one second oh no no it's not in there oh well whatever it's got enough screws but yeah I really like this form factor so I I kind of hope Chidi on and their firmware on it so did I intend the creality Creator Fest um it was called the share Fest and no I I went to the brewery um some cool folks have I considered building a millennium uh Mill uh yes um I know ldo is working on a kit last I checked so we'll probably be waiting on that went up to the ultimaker kit it's been acquired it's on its way I can't wait uh the latest firmware has camp and Allah the less mess you are you know what let's you know screw it um do I have power in here have I sorted out power yet oh my God it went everywhere okay the camera okay where did that power go oh my God why I don't know why I was gonna spill all that okay okay you come over here and come over here come over here hello we plug in there we go yeah now I need a c14 cable which got a million of okay plug you in there plug you in here turn you on did the mess get bigger um yes because there was a bit under there and that bin is was under there and now it's no longer under there it's so for there and it's over there let's turn the lights back on because I'm getting okay booting up please wait okay so how do I update a Chidi Chidi X smart three do I need a thumb drive for this I think I need a thumb drive for this where is the support software and firmware X smart three download okay so we are at 4.1 4.12 which one is this what is back probe and write Pro I've got what oh I've got a back probe oh some of it the pros in the back okay I got a back probe so let's download the sketchy firmware from China okay extract all okay on a zip file put into USB drive um I need a USB drive uh yeah but don't oh wait I got an extension here there we go okay does that pop up I don't know did I pop up on my desktop thank you okay but yeah I did not go to the creality share Fest um I I don't know if I was invited or it was like an open thing I just didn't go um I'd rather [Music] okay which one [Music] put the cute put the folder cutie updates on the USB drive okay [Music] cutie updates okay looking for that Brian don't ask people for stuff ask again your band plug into the printer and click that button to update cool okay yeah I'm I'm sorry anytime like as a content creator anytime um I post anything and I see it with other content creators too and we all see it and it's annoying as hell um anytime somebody posts oh I'm having issues with this printer or oh I'm not using this printer anymore you get a flood of comments oh can I have it can I have it can I have it vultures are we doing a giveaway we are it's for a followermaker filament that's the only thing being given away okay how do I update like that sales about updating okay I hit that there we go there's a joke sorry yeah you repeated it several times and I didn't acknowledge it the first time so take the hint um yeah this it had issues because it was old firmware like it the problem is a lot of these machines like they're these companies are delving into Clipper for the first time and they're kind of not knowing what they're doing and they're kind of like this has a lot of stuff that if you had played with reprap firmware you could see what they were doing because they like the Pearson who could figure this thing thought that was reprap like it's kind of a thing um so it's it's it's just weird um seeing these companies play with Clipper um it's still on 0.10 yeah it it's like that's the thing like free drinks free food and some swag and free stuff and printers giving away well I mean like freak reality printer yay uh 3D printers maker is making Clipper printers as early Marlin firmware exactly they're all using version 10 too which version 10 was depreciated like mid late last year like it it's the camp they did is just like why why can't it just be the normal one okay after the screen please switch off the printer and wait 20 seconds before restarting okay [Music] so wait 20 seconds somebody count to 20. uh what's your take on prusa doing Clipper um they're not um ts100 printer or the 100 printer um the 100 is it's a rook variant or it's it's a printer that's I don't know I think it's trying to be too much for what it is The Rook is perfectly fine as it is it knows what it is it isn't trying to be anything more plus I don't like the name Rook sounds cool the 100 just sounds like a so they're like an old religious show or something I don't know did you miss the Rook build no uh we're printing parts for it it's gonna be a while before we get to the actual build uh the build will be Saturday we start the build okay so I gotta change my Zed offset on this machine or at least wait for the bed to heat up properly before doing Prince okay let's see how oh yeah this is a little squished I can't remember what I was printing but I put my Zed offset like really low for a bit so it like really squished everything into the bed so I never had any issues with anything uh coming off the bed oh yeah we're good but uh I also had issues with uh nothing fitting or uh first layers being kind of poo poo oh yeah we're good we're good okay uh goodbye Microsoft Edge oh that's taking a long time to update okay so 3D view delete you uh The Rook ldo kit we're hoping will drop in September awesome more options is always good I have no problem with uh multiple vendors doing like it's always good to have different options it's always good to have different options are these all gonna fit all right back left there we go okay make them all fit there we go okay cool so that all fits there we go so we wait for that in the slice camera is going to wig out by the way it always does that's updating and it's also killing my white balance which I can't adjust on the camera remotely which sucks how many do we got here we got 430 people here everyone like the smash button do the do the thing do this now Everyone likes it like the smash button sport cheat code save and also don't forget to enter for your chance to win some polymaker filament Link in the video description and then also while you're down there join the Discord uh the community challenge will be taking place in uh on Friday so if you haven't had your chance to enter to win do this now are you building a rook M1 I'm building The Rook uh based on the fabrico kit so whatever the fabrico kit one is which I think is just like a baseball with a few mods a stream from 35 000 feet on an A320 wow Nero isn't as clear at 240p no I stream at 1440p so you could you can crank that up a bit and get a little bit more resolution stat holiday challenge ah when is the hall is Friday the holiday when's Canada day I know it's July 1st but uh Friday's a holiday yeah Friday's the holiday there we go I don't know be honest I'm a YouTuber every day's a holiday not really but Kitty has its own slicer God damn it why why name one slicer that's come out like from one of these printer companies that's actually better than like perusal slicer or default Akira like I don't get why these companies need to put a shitty skin just just release a profile for an existing slicer that way we're not you know forked every time an update comes because it's like oh it's based on personally look you have organic supports no we haven't merged it yet all right we'll learn from Tico speaking of Tico you guys want me let's unbox it y'all ready for this overhead that we've got power supply AC adapter output 12 volts 2.5 amps so you know that's a good thing and this is all you need for power your printer what's a Tico Chris My Sweet Summer child button wrong button there we go that's a Tico so I do want to give a shout out to North Prince 3D I traded them a printer for this so go check them out um there's their contact info hopefully it's in focus so go check them out because they gave me this printer [Music] we traded I've got the quick start guide apparently there's this only works on your phone feed me I also have a CD I have no way to re is this a CD oh no that's not a CD safety and compatibility is there a sticker oh here you go exclusive Kickstarter backer benefits no this is not the one at the show this was a different one thank you we appreciate you for backing Tico I wish there was a sticker in here this would go really well with uh with the ultimaker what's the kickstarter benefit that's a good question it's hard to know when the company uh ceased to exist over seven years ago the last update to the kickstarter was in uh 2017. this is like famous the tico is famous for like a failed Kickstarter printer and also it even comes with the filament that it came with Tico gym pla I don't know where the start of the filament is in the end there it is but yeah and no it doesn't spin you just kind of have to hope that it pivots Eco well well as the obsidian no this raised yeah the Kodama or the coconi or is it I don't know there's a lot of failed also if you have for some reason a caconi pre-order cancel that right now um how do you get your print out of here it's a sealed up thing well when you're done printing you just pick the printer up and it prints on this and there's your good thing I didn't drop that there's the guts of it this thing looks clean this thing actually wasn't used much I don't think so you have brushless motors instead of steppers and uh they ride on a rack and pinion no fans no fans you have a hot end that's pretty much a um a 3D pen hot end I don't think this thing has ever like it's got like a new printer smell I don't know how much this is printed I have no idea how much this is printed but I don't think it's a lot it's powered up I'm not gonna we are gonna do this on a live stream uh we actually will um do this all on a live stream where is oh my God that's the power Inlet okay um we're gonna play this will get its own live stream this will get its own live stream can I shove the mini Delta in there uh uh I have the mini Delta over here somewhere but it's about the same size so let's hit power up hopefully it Powers up okay you ready does it have a boot up time oh it's homing oh okay it lights up Kiko model one serial number tkks x116 step one connect to Tico hotspot open your browser go to print.tico I think it's faster than a bamboo no also there's like no way to get into this there's like no screws or anything so we as much as I want to you know put a Clipper on this I don't know if that's a possibility print.tico doesn't work 179 dollar pledge in 2017 yep honestly I just want this on the Shelf in the background this is going out in the shop or this will be in here once that we get this like kitted out to just be a studio like just having this pulsing in the background is just what I want basically foreign expensive display light well to be fair I traded a printer for it and the printer I traded for it is was worth more than this let's be honest be mine yeah it'll be my nanoleaf like I'll be honest this does look cool but it's it is absolute like you you know a 2.5 amp 12 volt power supply that's all that's powering your printer you I better strap this thing down because it's going to fly off the shelf what time are we at anyways 347 already okay oh also um probably be Thursday yeah it'll probably be Thursday um members live stream uh so every month we do a live stream with just the channel members and the patreon supporters um so this Thursday it will probably be early afternoon I don't know exactly for sure when um but this Thursday will be the members live stream for the month I don't know what we're gonna do yet usually we do stuff that's not normal stream content it'll probably be getting like the garage set up or something um building a bench or something I gotta go I'm going to Home Depot tomorrow buy a bunch of stuff to build benches um so um yeah if you're a channel member or patreon supporter keep an eye out on the Discord and at the the community pages on both uh for the invite link and if you're not a channel member or patreon supporter that's you know you click a few buttons you can fix that or you might be lucky and somebody might give some memberships and you might win but you have to be active in chat so if you're just a lurker who never actually talks in chat um you have a lower chance of winning if somebody or getting a membership if somebody gives them out back from whence you came to the Home Depot live stream uh I'm not going to stream from Home Depot I'm not one I'm not I don't have a live streaming setup for IRL actually no I don't know um but no tomorrow I got I gotta drop the little guy off at school and then I got a van rented so I can go pick up some plywood and uh two by fours all right maybe at her for Earth was last year but what's it next year or this year foreign I know that's what I I love it I've got my so I've got my sport track or my sport track I had a sport track that I had a sport track a long time ago um so I've got my my subie let's do this there we go I'm not mean to click that oh well so I've got my Crosstrack right I've learned my license plate so I don't give it away so it got all nice and dirty I love this thing that was a fun drive down there in that so anyways I got that I kind of wanted a truck I have to do house things um this was like half the cost of like the cheapest like full-size truck you can get um and so far I've had to do two trucks things that I haven't had a truck to do one of them was get drywall I paid sixty dollars and they dropped it off at my front door the other thing is I have to get some like three or four sheets of plywood in about 20 two by fours and some two by sixes I'm gonna go Home Depot and pay thirty dollars to rent their van for three hours and then whatever the gas cost of that is and then I won't need to do truck things probably for a year I'm okay with that my prior for not putting neopixels in your cell burner no I don't have neopixels of mine either uh yeah Home Depot 20 band 29.99 now unfortunately but yeah all this stuff fits on the roof racks I could do that but it's a new car I don't wanna but yeah it's 30 bucks so I go there I buy everything I throw it in advance I drive it home I go park down by the river um but yeah easy peasy this takes a long time to update holy but I want this on the shelf in the garage because this is a this is a nice little size form factor and it's enclosed uh bw's electronics thanks Mania cheers what would if I need to move my TV something I did every five years I know one truck thing once a year that I could have done with a 30 rental from Home Depot but you know I got a truck out of the 3D printer contest which contests there are quite a few contests so I for those that are aware I ended up bringing five printers to give away at Murph um I traded one for the tico uh two I donated uh to a school group um one I gave away for a trivia contest I basically just tweeted out hey come answer a random trivia question and you'll get a printer and then the last one the super racer I actually gave to the winner of the um free for all because we didn't have a prize for that or there was no prize announced so I'm like you know what screw it whoever's whoever's death racer is the last one standing and put up a good fight uh you get a super racer and uh oh fabrico 100 cheers Hector uh love the shirt can't wait to see what you do with the Rook uh parts are printing now we're going with sparkle orange and Sparkle green we're building a shiny carrot go and rented a truck oh if you have a camper like if you're towing a big ass camper then yeah you know a truck makes a little bit more sense there but I'm talking about people who buy a truck and like they pretty much just move their butt to working back and that's about it uh this has been asking answered already about what were exciting things at um I spent the a good what 20 minutes near the beginning of the stream going over some pictures from Murph um so like there's just a bunch of cool stuff there here's the thing if you went to Rocky Mountain reprap Fest a lot of the same but a different area so like the vendors pretty much had near the same thing as Rocky Mountain um but what was different was like the people who came out uh the the like the on-site demos like the stuff the locals brought and whatnot people were displaying but in terms of like vener vendors um am I going to try out huge Forge actually yes so I saw pictures of these on Twitter like everyone else and I was like okay Cuts kind of cool but I actually saw these in person because this is me recording at uh Murph and these look badass in real life they they got like almost like a depth to them um and it's really cool it's it's not a little pain you basically use four colors and it like it's a really cool effect so I probably will be getting qforge um to play with so obico brought like 100 pizzas I know after we bought pizzas update finish confirm cool uh so now the cheaty is updated so let's see here printers do I have it shitty Exmark three yeah it should be on my network foreign Cheers Cheers from Australia cheers from Canada okay uh wait for the updating screen 24 year improving from Auto bed leveling and input shaper okay so that is calibration okay on our bed leveling preheat hotbed to the filament printing temperature okay it's asking me to preheat for that okay good I decided enough from work uh take care Dan good chatting with you at uh birth there uh what was the trivia question oh is that what year did the Boron 1.0 be released or when what year was the world 1.0 released yeah and you get free polymaker filament when you buy heel Forge you get like a coupon for like whatever the amount is um where is my I could have sworn this is connected to my network maybe I have to reconnect rat OS no it's not rat OS no no okay I guess I gotta reconnect it okay I gotta re-level it um I need a piece of paper I've got my Chidi Tech leveling paper foreign any plans to build a Pandora's Box I don't know what that is what is that what is a Pandora's Box [Music] got everything unloaded yeah I uh there was a big storm on the on the Sunday I did not leave on the Sunday I actually I probably could have um but last year basically I left right after the show on Sunday and drove home and then I saw it like pictures of everyone hanging out and I was like ah so this year I'm like I'll drive home the Monday morning so I basically just hung out the Sunday and then I just woke up Friday or Monday and drove home but it was kind of shitty out on the ride home like I drove through Ray the entire way the print size of that printer offhand this one I think it's like 180 ish I can't remember exactly lots of tornadoes that ain't good realizing I'm hungry right now where's the wifey I think they should be home by now ah bamboo has discounts for O'Neill what is it O'Neill year anniversary thoughts rants about the 100 Pomp and the five dollars off K1 oh five percent off K1 and I haven't played with a K1 personally I've only ever seen them in person like I haven't had a chance to actually play with them um besides the whole uh violating GPL with their firmware um I'm not a huge fan of the design of the printer and the build quality that I've seen but I haven't used the printer so I can't really comment on it um beyond that um as for the p1p it's an amazing value the p1p is amazing bang for your buck and it's extremely hard to beat it um yeah also um like sure it appears to try and flood the market with their printer so everyone is used to their printers and that's the only printer people are used to using and that's the only one they know how to do because you know being able to Auto calip or manually calibrate your your PID tune it's not something they want you to do I you know if you're a winter that's fully locked down and you really don't have any control over and everything you send to it has to go through the cloud if you want to use all the features of the printer and if you want to use the webcam built into it it goes through the cloud um it's an amazing printer like the AMS system is probably the multi-color setup for 3D printing at the moment in terms of ease of use and reliability um yeah you it but you know there's more than one car brand not everyone buys Toyota Corollas so we're on v01 or p1p completely different printers and completely different segments they should not be compared so like I've got my X1 here it's got an AMS I pretty much only use it for AMS stuff nowadays um the p1p I barely use anymore in fact it hasn't printed in a long time carrot not so good well here's the thing do you have a bamboo if so you're running the AMS if you don't have a bamboo you're not running the AMS uh the carrot's fine I just don't use it because I the printer I had it on was an open air printer um whereas I print mostly abs and again I don't even print a ton of um Color Prints so or multi-color prints so it's already a niche to be as is can't mod it so can't break it oh you can break it and if it does break just remember you know if that three dollar bearing in the X Y axis goes because all bearings go at some point especially in a high high speed core XY system and you know they didn't blow the budget on high quality bearings um it's only an 80 x y assembly that you have to purchase and then you also have to completely disassemble the entire printer to replace so it's easy peasy K1 has modified Clipper Yes the band The Reality machines are running Clipper you know they try to say it's not Clipper it's clipper and they're violating the source uh the GPL V3 by notch disclosing source and we got the printer kit I have not yet it has been acquired it just hasn't shipped here yet sorting at hopefully this week bamboo Hondas bamboo hot ends are good they're amazing bang for the buck they're not crazy high flow like compare like you're not getting Rapido rates out of it or anything like that but they are a pretty good bang for the buck but if it were Clipper they would have had uh Dr Dave's it's quite simple they're violating the license it's Clippers GPL V3 if you make any modifications to the firmware or to the to the files you have to release the source code for your update or for your modified files and creality is failing to do so we know it's Clipper people have hacked like bodged their way through their shitty interface to actually just open up fluid on it it's running clipper USPS just dropped up I'm waiting for my mark IV kit converting a bad Slinger to a cork swipe could a small be possible yes but a complete waste either build one from scratch or buy one from scratch taking apart a perfectly functional bed Slinger so you can just build a core XY using some of the leftover Parts is not a smart thing in my opinion unless you're doing something like a shitty Ender fire variant sv06 you're not going to reuse most of it other than like Motors whoop-dee-doo build one from scratch don't don't waste a perfectly as v06 deserves better grab a K1 uh no because they've had so many issues trying to deliver them so yeah spo6 is great yeah exactly what Hector says like there's no point taking a perfectly serviceable quarks or bed Slinger and just completely losing that bedslinger cheek ability quarks while using some of the parts just just build the corks wide and then you have two printers sign under conversion yeah but it's also like just a pile of extrusions and we're using a hot end and whatnot and Motors it's not really a conversion you're just completely disassembling the printer and using the parts to build something up it's like I've seen it's is it the bear mod for the prusa mini that just basically turns it into a prusa Mark III like a smaller person Mark III or the wubby duck go we'll be Ducky's right here pull V wheel corks why I'm like you can do better you can do better foreign and then where are you where'd you go ready ready is this the new layout this is pretty much the layout I quickly moved the bench just to get an idea and I gouged the out of the wall doing it and we do have the overhead camera set up but uh this camera is going to be moved out a little bit more so you're you'll feel like a little bit more out and a little bit more back so you'll see more of the bench basically I want like this whole area to be visible from that camera because right now you're kind of cut off so we may end up moving chat to the other side so chat may live over here now we'll see yeah probably I probably actually will have to let's just see here one second here one second one sec one sec yeah yeah oh yeah yeah so Chad's gonna probably live on this side now um because this will actually allow me to build stuff here and you'll see it so there we go top left like over here um no because once they like this okay this camera is angled way more so the actual final camera view will be more like this but it'll be shifted this way it's just I have it like this because it's in the camera's not in a good spot I gotta bump the camera out more so the camera is going to be more facing me directly so that means like right here is where I am this I'll be more because this is always this is all wasted space this I'll never move over there right camera space goes to here so basically this is where I want the edge of the camera view to be right right about here so if I had chat here it'd be over my face so chat will live down here where all you're going to have is cut out my waist so yeah this is not the the the the the the final camera position the camera is going to move so I gotta take it off the wall and move a bunch of stuff so it's kind of I haven't done that yet so yeah the front view yeah the front view camera I avoided doing the front view camera for the longest time um and it worked for the setup I was doing because we were using building so I had more floor space so I could like but it got to the point where it was like okay we're kind of limited now chat has a slimming effect yeah put chat on a fax machine just have a dot matrix printing off chat in the background yeah yeah oh yeah that's 40 cubic infill attach a trail of chat I would like like so here's the thing um this printer is staying this one's going to the garage the Bamboo's going to the garage because it's a lot of um so garage garage and these two are going to the garage this one's staying I'll have a mark IV will be in here um toasty's going to the garage tall boy will be up top tall boy shall live again um and and go right here and I might put a Delta here too we'll see so I'll have more room in the background but what's going to happen is I would like because the rep box is going to go to the garage too so I'm gonna have this open area up here and I'm gonna have like the mark IV here so there's gonna be all open up here so what I would like is to have a screen with like you know the most recent donator or like the most recent member's name up there or something or some sort of like thing because I'm not one like yeah I have stuff pop up on on stream when you like when you donate or whatever you pop up up here but I like I don't do the crazy annoying all over the screen so I'd rather have it IRL so his lto kit ldo is the only kit I personally endorse so yeah tall boy shall live again and tallboy is going to get tap um and a few other mods so so this is done um let's throw some filament in here what is this what is this that's poly mid okay let's let's do something to do Orange Let's feed it some bamboo wait for that heat up on this flap screen so those would be cool where's the XL going that's a good question that's a good question we'll see so this is staying that's going so this is going to go here there'll be a mark IV here so I'm going to have room here for a printer which might be tall boy and then I'll have I'll have room for it on this bench over there because I think it's only 23 inches deep and that's a 24 inch bench so I could put the mark IV on that bench rest into the brush resin Maybe the problem is the temperatures in the garage are going to be like around freezing and boiling and whatnot so thank you 3D benchy 15 minute benchy go uh isn't that what said I'll make a room for the XL no it's because I'm I'm moving to the garage well not moving but basically the garage is becoming the shop so any builds that we do will be in the garage so that frees up me to move some stuff out of here so that I could turn this more into a studio yeah put a camera on the fridge no because that's the fridge is actually out of the set so you won't actually see the fridge on camera ever would you recommend building a zero two before 2.4 no zero two is a good backup uh secondary printer it's not a if if you already have a a larger format printer or larger printer um or mate what would be considered like a main printer um yeah go build a v0 but if you haven't built any printers yet you don't have any printers or you only have like an ender three a shitty Ender three um build a uh build a V2 first you'll get way more out of it time to build a shed no um let's see here yeah so the biggest I could build would be 10 by 15 feet they're 10 by 16. I'm allowed 160 square feet which is pretty much as big as the area in the garage so I could I could build a shed as big as what I'm I have in the garage but then I also have to fully insulate it fully heat it run power to it um and it'll be a nightmare oh I don't have a moment actually that there we go it's printing uh uh [Music] what happened do you recommend it depends I really like revos [Music] real world application of a switch wire whatever you need it to do sounds like a rattle box [Music] well it's also doing 15 minute benches foreign that's why they make Revo high flow built with somebody with no mechanical sympathy yeah that's the problem with these like sheet metal frame printers too they do kind of rattle but yeah if you need if you need need like high flow high flow um go with a rapido I just like the ease of use and like the quality of a Revo okay so wifey's home it is 4 20. nice um so I'm gonna end the stream at 4 30. so all this about ldo kiss makes you want to do something fun okay Hector do it I don't know what you're doing what's the max flow rate of Rapido high flow um you'd have to check the documentation but they have it listed I can't remember off the top of my head though Hector's like okay yep that's a 15 minute benchy never what it says it is uh then watch the videos of I think Stefan did one or Tom did one where they actually measured it measured it plus e3d is pretty like realistic with their their testing they don't like you know they don't do what another company did and cook ABS at like what 300 Celsius so they can get higher flow rates out of it for some reason I brought this camera to Murph I don't know why I brought this camera to Murph but I brought that camera to Murph I don't know why I don't know why I did that oh don't lose that don't lose that these are all that that can go there those batteries can go in there and then I can put my goggles back there we go fly my tiny whooping a little bit once I get the garage done because you know you may not like it but this is what Peak um athleticism looks like in today's day and age right flying that tiny look at me I'm a modern soldier on the battlefield actually these are nowhere near you'd have more antennas more long range stuff there we go I'm cool nobody ever looks cool flying a drone drone frame twins I'm kind of working on one actually right now price for the p1p yes um I I was on Twitter when everyone and their grandmother started spamming their affiliate links so yes I'm well aware I've done it yeah I built this guy so this this is an odinada um this one I see and see the frame on my little desktop CNC it's carbon fiber yeah these are DJI V1 goggles and I got the BDI Digi adapter so I can fly analog with them yes I know there's like one millisecond or there's one frame delay or whatever but you know what it's better than my ev800s I was using so good enough good enough [Music] uh what's the cost to be able to get one to cut aluminum depends like technically mine can cut aluminum not good okay actually let me rephrase that let me rephrase that do you want to cut aluminum or grind away with it with a really fast bit very very light cuts that take forever that's kind of the thing can you get the goggles where you don't have the transmitter next to your head um yeah those ones do it because it's a receiver on your head not a transmitter the controller is the transmitter although technically with DJI there is a little bit of two-way communication um but with like usually it's just the receipt it's a receiver on your head so if you're worried about like the the evil angry Weepies burning your brain out um it doesn't matter because it doesn't transmit it receives so that means the signal is everywhere yeah the the transmitter is overhead this is the transmitter right here that's the transmitter here's the antenna so this is your camera this is your flight stack that's the brains of it and that's your VTX and this is a GPS and this is a dental this will do five kilometers that way printed from frame I don't I don't know on the timetable because let's just say variant one didn't do as good as I would hope so we'll see I haven't worked on it a little bit though what machine did I use the SpaceX oh that uh the v400 Express lrs you bet all my quads are Express lrs now yeah they're all Express lrs pretty much they're all analog too except for the one LR4 Where'd I put my mouse I lost my mouse oh there it is uh what are we at right now we're five minutes so we're gonna do the giveaway in five minutes Link in the video description details on the code what code I'm gonna watch the coming out Prime now did I miss something um do you have a preference for ESC or flight controller no not really um like this is this is the one it came with the mobile 7. uh the flight stack on my three inch which is technically like do you call it the name of the frame or do you call it what it was this was an hglrc xjv145 that I crashed and then I changed out the flight or the body to an Apex 3 knockoff body off alley um and it's heavy as too it flies fat we've added like 50 grams to it but you're like what code for what what code the numbers oh the message you put in Discord oh I don't get Discord announcements like if I'm live streaming and you DM me on Discord I don't get like an ad so I don't see it I'm trying to oh from fabrico heck or 25 off any kit and 25 to Nero 3D donation per kit sold oh okay why is the rat rig stop because we're not printing anything on it right now I only have two spools we're only printing two colors for the build and I only got two spools of filament I can't feed one spool into two printers so yeah you get 25 off ldo kits at 25 donated okay Hector I was planning on ending the stream in five minutes but I can keep going there you go what what kits what kit so are we talking here we got Rook kits I should probably put a link to the Rook kit uh yeah here let me let me actually put a link for the Rook kit in the video description foreign could lady in the to film it yeah just have the Spool in the middle and it just Feeds out I don't know is it for the Rook uh I can't pull uh technically not because usually the bottom is uh buried in there and you're not getting at it I was like what's the actual code is there a code code is it code is it just Nero 3D code is zero three okay any kit I'll put it up on the screen yeah what what kit is it any kit [Music] [Applause] any ldo kit see I had a chat with uh Nicholas about this like I'm all about I'm okay if you guys want to do giveaways on stream but like trying to sort it out while live while chat's going is like uh so I'll just put that there and we'll we'll I'll fix the update like no it's just you know logistically Prep Prep I know you at the Discord I see it but I don't know if it's all kits or just or off any kit oh any kit okay okay any printer kit okay well Link's there go use that fabrico.com you can get to The Rook kit uh Link in the description I think that's the FH um is there enough on there with saving no garbage the site isn't taking it for Rooks oh oh v02 try okay so it's Boron kit okay it's a boron kit okay and micron all right there we go area area is loud Chidi is loud I'd love to do The Rook put it yeah that's true what what I should probably what is the actual cost of a room kit 300 bucks yeah you'd be losing money on that the margins on them are thin as is okay so we're gonna go to five we're gonna go to our normal end time of five it looks like anything printing a fast benches this is true and we're at almost done what is a rook there's a link in the video description that brings you right to the kit but it's basically a mostly printed small form factor corex wide machine go the hold a benchy in 15 minutes Behold a benchy in 15 minutes going where it deserves to go in the garbage because what the heck am I going to do with a benching especially a poo poo looking veggie the bin okay now I gotta connect this to my Wi-Fi uh Network all right okay takes a minute oh all right Wi-Fi connecting oh did that actually hide anything okay we're good there we go saving Wi-Fi data there we go hey there we go see creality you don't need to mess with it you could just leave it did I see ltt's moves yeah I see I know LTT has a seal printer or metal printer uh do I know the guys actually who was that I'm horrible with names by the way do I plan on upgrading no I'm gonna build the Rook as is and I'm just gonna keep it as is I I like the I here's the thing I think small printers like The Rook very quickly delve into the uh the realm of diminishing returns pretty quickly um because like a rook is 300 for a kit once you start like adding stuff like aluminum extrusions and like like you spend more money on it hey guess what it's a v0 like but it's not as good as a Visa so you get what I'm saying like it The Rook knows what it is it's perfectly content being what it is it's quite good at what it is so it's like my uh my uh bonsai which is built out of scrap Parts it's like yeah I could do stuff to it to make it better and faster but what's the point The Rook is basically what the v0 was originally going to be like the v0 for those that don't know the Boron v0 was originally mostly printed The Rook knows where it is at all times it knows this because it knows what it isn't and what it isn't is a high speed printer high speed ABS enclosed printer is it better than off the shelf well here's the thing what once you start going wow I really gotta change this camera angle it's way too high um once you start looking at DIY custom printers you're in a different ballpark than than off-the-shelf machines it's like when people ask like oh how does the AMS compare to the irca it's like it's quite simple what machine do you have they don't they they both do exactly the same thing it depends what ecosystem you're in or like should I buy a bamboo or should I buy a Vora it's like you don't buy a Vora you build a boric you want to build your printer you just want to buy your printer if you want to buy your printer go buy a bamboo if you want to build your printer build a voron potato potato Rook printed and Peak oh that's where it went hey I found my uh hamara sorry e3d for never actually using it on anything you want to send we'll send you a Humira you can use it on something okay and then what do I do I probably forget about it what is all this what do I have in here these are bins that were like under the table that I forgot about foreign well a lot of people print about a pla so open air PLA and PCG is pretty much it acrylic cast acrylic filters have some fun hey guys look look we're now in Mexico and now we we've traveled to the Arctic and now lava level I don't have gel films oh I think they're for the the little LED panel lights I have an mg90 Servo okay pins what are these kits that's a lot of magnets holy what is this kit [Applause] foreign daylight I got daylight matchsticks and full on Daylights when did I get Daylights who gave me Daylights okay I've got Daylights that's good that'll go on a printer I guess probably in here where the matchsticks when did I get these okay do you have the orange one I don't have an orange oh wait I can make an orange filter there we go there we go it's New York during the uh the the fires it's for the v0 yeah but you're getting you can change it p1p is permanent that means they've probably paid off their tooling I want to say I want to think about it that or they're just trying to fill the market because here's the thing like you want people using your product and you want people to continue to use your product well if you get people into an ecosystem where you're the way you do it becomes the norm people will keep buying your stuff because that's what they're used to it's like Apple people Buy Apple computers because they're so like don't get me wrong Apple makes good stuff right but a lot of people stick with apple because that's what they know because it's different than Windows and you can't just run Windows on it you know it couldn't be that simple so on a bamboo machine you you use a bamboo machine because it just works you don't need to PID tune it oh you don't need to modify it it just you unbox it you unbox it but if you have a whole group of people that they only ever use those machines they'll just keep buying those machines because they you know on this oh you gotta run a PID tune oh you gotta you know you got to calibrate stuff you gotta adjust stuff you have the ability to or you just hide it heard a parallel I know of it it's like yeah yay an interface layer that breaks stuff that doesn't have full compatibility and I don't even think it works on uh Apple silicone I'm talking about the new Max the M1 stuff the stuff that's actually because at that point like here's the thing an old MacBook isn't the whoop-dee-doo the hardware is the same as a normal laptop it's an Intel whatever but the M1 stuff is is kind of yeah the M1 stuff is is kind of the cool stuff the although apple or what you can't get uh windows on arm now but it's still its compatibility is the problem it doesn't always work I got a bump flow rate up on that am I oh that's why that's why there we go M2 yeah I would love to play with a a Mac like get an M2 especially like the laptop the problem is I cannot justify it for any sense because the only time I would use it was it would be when I travel and I don't travel enough nor do enough editing on the road to justify a uh a MacBook so so I use my little i5 and it's good enough the experience is worth the buck I I'm being able to play like cyberpunk at like you know 100 FPS with like maxed out settings you know I like to be able to play my games at you know beyond slideshow performance or hey in my case here you know just plug in a PCI Express HDMI capture card or just you know more ssds into the computer that's great to have or upgrade my video card or you know not spend 250 friggin dollars for 16 gigs of RAM that I can only upgrade when I buy it and I can never upgrade it afterwards yeah there are very real downsides to the Mac ecosystem system in my opinions it's not for games which it's great for rendering but not for rendering games or be able to repair it oh yeah I know that's nice too 100 around 4 Megs oh I remember that now but like right now again I'm looking at buying a computer for the the garage and it's like 16 gigs of RAM 40 bucks but if it was an apple it'd be 250. uh the x-mart so you should get it on stock yeah you should be able it should work on stock Clipper there's no reason it shouldn't either no ddr4 never buy a laptop for today you buy your laptop for three years from today yeah because that's when it's horribly outdated that's the thing it's like eight gigs of RAM is still standard on Max and I know people like oh it's super efficient yeah but it's eight freaking gigs of RAM that was like the normal on computers like 10 years ago actually no not even that was like six years ago like and the fact that you're fully locked into it and you can't upgrade it it's like yeah the programs are super efficient now but how are the programs gonna be in four years three four years and margins are here of course the margins are huge I would like a frame a framework would be cool either one of the the ryzen framework 13s or even the 16 inch with the GPU that would be sweet but again I can't I don't I can't justify spending money on a laptop I don't travel enough and I don't edit on the road so yeah [Laughter] yeah I'm not pissed about bamboo I just I'm not a fan of their business practices in certain regards I still again recommend it in the same sentence it is a machine for some people but it's not a machine for every people like everything Nate name one name one thing where there's only one product and there's no alternative and that's the only product for it because that's the only thing that works and it's the best at it and there are no Alternatives there is always Alternatives there's always different things [Music] get a cheapo laptop or more and there you go Forum lives SLS okay to be fair Toyota I don't know I drive a Subaru but then it got a Subaru safariable anyway so hello Andrew what are we at right now we're gonna be ending soon we've got 12 minutes 12 minutes to enter for your chance to win some polymaker filament Link in the video description you know Parts have no alternative uh you can't get hot ends cheers dragon X1 Carbon reverse V 2.4 Do you want to build your printer buy your printer there's your answer Snap-on tools I built multi-million dollar injection molds with tools I bought at Canadian Tire that I took torches to and grinders to make them fit yeah the proof XL was there I don't think I I spent more than like two minutes at the prusa booth because I've seen it already like I was at rapid like two months ago like talking with Joe about the printer while it was right there hardest part make sure you read the manual first don't jump into it the hardest part is the part you skipped I want to own my printer well you do own the bamboo until like you know they lock you out which they probably could do if they really wanted to which I don't like that being a possibility remember about multi-tool being out I have no idea what zero clue and green well here's the thing like it depends what you do like I did a poll on my channel um like a couple weeks ago how much do you print and ninety percent of people print less than five spools a month and half of people print one spool or less a month on average so most people in this hobby don't print an absolute ton of filament so like even me we had three printers running in here that's the first time I've had three printers running in this room at one actually no one was printing the blaster or the Nerf blaster I had three running but like I haven't printed anything since that Blaster really so it depends what's the quality of the print the same all modern 3D printers if you take the time to tune the profile right will print good and they'll all print within margin of error of each other no joke like there's really no point in comparing print quality between modern well-built printers because they all print fine some you might not be able to print as fast or you know they might not be able to like get the same overhangs at the same speeds but if you take the time to tune a profile a benchy off one printer should look just as good as a benchy off another as long as a printer is well built some might be able to do it in 30 minutes and some might take 33 minutes in my opinion when it comes to 3D printers quality of life how easy they are to use what you're looking to get out of your printer so if you're a hobbyist and you're like wrenching on them the ability to Mod update tweak and tune that's a big thing but some people just care about unboxing print are you somebody who does a ton of Cosplay stuff um or you print models like you design and print models you don't care about the printer you care what the printer does in that case yeah something like a bamboo makes a heck of a lot more sense but somebody like me who likes to Tinker modern wrench vorons rat rigs prusas they make more sense it not all printers are for everyone all printers are for somebody though so if you're one of the people who you know gets a chuckle going on anytime there's a proof of video and you're like you bought a mark IV you're an idiot only an idiot would buy a mark IV yeah you're the idiot and you're at Internet troll and get better like jeez get some new material so yeah even an Ender if if all you got is 99 to your name and there's a Micro Center up the road and you want a 3D printer go for it I personally recommend you know run a few mow a few more Lawns and get something like an sv06 but you do you the problem I have is the QC with the Enders it's yes tons of people get an Ender three that that 99 industry that works just fine a lot of people don't though and the problem is when it's your first printer when you're getting a car for the first time you go to a used car dealership you're like I need something that's you know it's old and I need to save money but I want something that's kind of reliable I'm gonna get that like Civic or whatever you don't go yeah I'm gonna go get that fox body Mustang that like a previous 18 year old was wrenching on and who knows what they did and I'm just going to inherit his project no you start off with something simple and reliable that way you learn and then if you want to get into the tweaking and tuning later then you do that but that's my opinion that's what I recommend people do some people go right into the project does the bamboo become a doorstop if bamboo bellies up you would be able to print remotely and by remotely I mean SD cards um but anything Network related um the webcam gone webcam feature gone updates gone you cannot update the firmware on there without connecting it to the cloud so even right now I have mine the the p1p hasn't been on in months the X1 Is On LAN only mode I can't use the webcam on it I can't I can't stream the webcam internally if you want to use the webcam you have to connect it to the cloud and your webcam feed has to go to the cloud along with every file you upload to the printer I don't like that I don't like that being a thing I'm worried I'm not worried what bamboo might do but I might I'm worried if somebody hacks bamboo what they might do which you know all companies have great network security as we've seen in the past then even bamboo at the minute they've had network security issues go read their latest blog post so yeah I don't like you know having the printer be connected to the cloud at all times to use all the features so bamboo goes under the printer becomes a lot less usable now they've said they'll open source everything however if the company goes under it's not up to Bamboo decide it's up to creditors to decide and the creditors aren't going to let closed Source IP and patents uh just magically Go free for no cost they're going to sell it to somebody else who won't open it because why would they that's it business that's how business works that's how mafia works so let's print our super secret prototype on a bamboo yeah I've seen a tweet about some Naval class that was using the bamboos and I'm like my brother in Christ you need to get some network security uh some some singing into or whatever the heck it's called guys talking to you because you are breaking a ton of rules what are we at what are we at we got five minutes left I gotta put a clock on this I don't I don't I do like the the chat here Second City is intelligence I got the wrong one mixed up um now all of China knows what you have printed hold on oh optic that's what I was going for opsec you know somebody who you know did do pew pew stuff for a couple years you think I would remember that but the bamboos have their own copies of stars well it was fun when their their first versions of the slicer were calling home to prusa because it was it's based on Bruce's slicer and it was still phoning home and also if you like looked in the the code it was it wasn't um it was was it by bamboo research and a bunch of stuff Ctrl C control V but it's like then again you know I could on creality they're K1 um you know hello the annex K1 and then they also had another machine oh let me find it here here we go um because you know control C control V so so Annex had the K1 the K2 and the K3 well creality has the K1 so they couldn't come up with an original name um but then also where are you I know I have a I have a video of it I have a video of it I know I have a video of it no that's not it so um so this is like an internal printer that creality had at the show um so they they have like a a uh like custom little DIY tool head that they're playing around that looks kind of like a mechanic or uh kind of Eva inspired um but they called it the Raptor like okay come on they can't even think of a name of a printer on your own you gotta copy somebody else's careful with the display you can see the reflection what display what what display reflection oh this no that's not a boron that's not a boron that's that's more I think that's like zero Gene type I mean like can't even think of a name on your own the power of modifying I know I know yeah yeah creality had uh I talked with one person who was there with creality um I voiced some opinions and and I said my piece and that was that call it Bishop the content of your screen oh you can see my Twitter right yeah not not too much I can't see anything reflected in that door are you talking about this screen no that's not being reflected what's being reflected what's green what screen is being reflected on the rat break let me let me actually pop the screen out so I can see it oh this screen oh well you can see Twitter it's like some weird thing dancing in the corner what the heck's up with that okay five o'clock let's do a giveaway we can actually do wheel of names for once Let's uh so remember you got like I don't know how long this code works for on fabrico.com for any voron or Micron kit um but every stream we give away a spool of filament from polymaker so let's do that right now and we actually get to use wheel of name so one two three four five six seven eight nine ten eleven twelve thirteen fourteen fifteen sixteen Seventeen Seventeen people do not know what five plus five is or they didn't answer it it is a requirement it is a requirement so if you thought you were cute and put like some random um numbers to be cute you're going to get disqualified simple as that okay um yeah somebody give you a number between uh Four and Twenty in number between four and twenty eight that works one two three four five six seven eight thank you round around it goes where it stops I don't know lamb corn 3D wow you know how to answer a skill twisting question good job congratulations you will get an email from me after the stream ends with information on how to collect your filament from polymaker so everyone golf Flaps in chat golf claps in chat so we're gonna end it there um my voice is gone I'm starting to feel it um so yeah so we're printing Rook parts so we should have everything printed and ready to go for Saturday when we do the build um so don't forget Friday is the community challenge stream Link in the video description uh for that join the Discord enter for your chance to win some polymaker filament along with some only benches merch um Thursday will be the members live stream um so if you're a member of the channel or patreon supporter watch out um in the Discord along with the community channels there for your the link for that stream um so now I gotta figure out dinner I'm hungry I'll figure something anyways for those that donate to the channel gifted memberships to others or became members to the channel yourself I thank you not be able to do the things I do create the content I create without your continued support you make it all possible and shout out to polymaker for this fulfillment that would give away the stream and also shout out to fabrico for The Rook kit that we're printing parts for right now and also for the donations and for that uh discount code there that we had um so yeah enjoy the rest of your Tuesday and I will see some of you on Thursday the rest of you on Friday bye there we go [Music] [Music] [Music] foreign [Music] [Music]

Channel: NERO 3D

Views: 6,553

Keywords: 3d, printer, printing, 3d printer, 3d printing, 3dp, fdm, fff, filament, voron, nero, nero3d, nero3dp, diy, hack, custom, reprap

Id: r_CGMkmnPSY

Length: 184min 46sec (11086 seconds)

Published: Tue Jun 27 2023