Assetto Corsa Csp Traffic Tool Tutorial (Part 2 fixing issues)

I want to go over a few things from my last video with the CSP traffic tool we did have a few issues I've had a few comments I found the fixes first I'm going to show you how to save your traffic file after you've completed it you're going to open the track data folder and inside the data folder the two file surfaces and traffic those are the two files that you need to share your traffic lens I did get a few comments and people were saying that they were able to drive through the walls to fix this you need to open the surfaces file once you've opened the file we're going to scroll down to the bottom I'm going to delete the script and physics that I told you to add from the first video now we're going to scroll all the way to the top to surface underscore zero we're going to look for wave pitch we're going to delete the zero and replace it with extended Dash zero I've also put these new script and physics in the description so you can just copy and paste it now where it says script in physics and allow tools we're going to copy that and we're going to paste it at the bottom of surface underscore zero once you've done that don't forget to save it and that's going to fix that issue of being able to drive through the walls that will no longer happen another issue that people have been having is not being able to enable free Camp you're going to go to efman to set the cursor folder you're going to go system CFG and you're going to open a set of corset.ini with notepad once you've got that open look for allow free camera zero and you're going to change the zero to one once you've done that make sure you save it another issue that people have been getting is a little message popping up Sim crashed now I'm going to show you how to fix that but first I want to show you something I didn't on the other video now on the intersections you'll notice on the other video I had the lanes going right across the intersection you don't need to do that as you can see here so what I want to show you is if you've got a trajectories if you select all the different Lanes you can see all the routes that they can take and you'll see a little box that says allowed so you can untick it if you don't want it to take that route as for the issue of getting the message Sim crashed I didn't actually know what was wrong at first until it actually happened to me and what I found was after you've made an intersection and you've made your lens if you delete a lane from that intersection it will cause a Sim to crash I'm just going to show you I'm just going to delete this layer and you're going to see that message pop up so there it is Sim crashed fix this issue all you need to do is delete that intersection and then redo the intersection and then you can also redo your lane now if you don't know which intersection is causing the problem unfortunately you're going to have to delete every intersection until you find the right one but it's likely to be the last intersection that you created well we're coming to the end of the video I hope this was helpful if you come across any more issues don't hesitate to comment if I can find the fix I will hope you enjoyed the video thanks for watching

Channel: THE AC KING

Views: 15,431

Keywords:

Id: asDdM_Hhcdg

Length: 2min 48sec (168 seconds)

Published: Fri Nov 11 2022