4x4 Willys Mini Jeep 4x4 Car Build EP 21, Dash Cluster, Tool Boxes, Grab Handles, Axe and Shovel

foreign [Music] thank you [Music] thank you [Music] foreign [Music] [Music] foreign [Music] foreign [Music] [Music] foreign [Music] [Music] [Music] [Music] thank you [Music] [Music] thank you foreign [Music] [Applause] thank you foreign thank you [Music] come on thank you okay Ollie so we've got a brakes bled we've got the reservoir topped up everything's good but the brakes are pretty tough on it because the vacuum assist isn't connected we need to somehow figure out how to get a vacuum on here and I reckon we can do it from this vacuum pulse pipe so what I think we can do is connect this little one-way valve onto that pipe and have that connect on here so that'll pull the air this way but it won't let it return back in and it should develop a vacuum in a vacuum Reservoir so we'll give that a go yep okay foreign [Music] [Music] thank you foreign [Music] thank you [Applause] foreign [Music] [Music] foreign [Music] thank you [Music] [Music] foreign [Music] thank you [Music] foreign [Music] thank you foreign [Applause] so Ollie that's the ball we've got time for in this episode we've done the dashboard we've done the clips for the window we've done the dash cluster the clocks and they turned out amazing we've done the seats replicated the Wellies Jeep seats look brilliant and but we've even done the little tool boxes at the back either so close that we'll use the actual reproduction wheelies toolbox lids for them and they've turned it amazing yeah we've even done the ax and the shovel for the side of the wheel is cheap and these actually attach in exactly the same way as the the real g503 or Willis or gpw Jeeps did so we've really only got the glove box yeah and the I've always look at the back seat still to do it's a little kind of fold and seat that goes in and we've got the roof boards which we're going to attach on here and they go around the edge of the tub at the back of the Jeep and they let you open up the hood and they hold the hood up when you've got your soft top closed on the Jeep Clips here to hold up the hood yeah so it gets little um Fasteners on the front here they go along here yeah and then Hood Clips on and it comes over here and the bows hold the hoot up but when the Hood's not in use bows get folded down and they run along the back of the top here all of that I think for the next episode mate what do you reckon it's all we've got time left for in this episode there's a quick driving lesson would you reckon Ollie yeah let's do it yeah let's do mate [Music] thank you [Music]

Channel: Oliver Banford

Views: 41,259

Keywords: Oliver Banford, Jeep, Willy's Jeep, 4x4, four wheel drive, self build, 4x4 axle, shorten axle, narrow axle, welding, project, garage, off road, petrol, Welding, weld, custom, customise axle, suspension, miniature car, kids Jeep, mini Jeep, mini car, kids car, kids off road, kids project, car build, 4x4 build, 4 link suspension, 4x4 chassis, Prop Shaft, Plasma Cut, Mig Weld, Bodywork, Exhaust, WindShield, Fuel Pump, Fuel Lines, Gear Linkage, Dash Cluster, Axe, Shovel, Brake Lines

Id: GVT5LfV7EHA

Length: 20min 6sec (1206 seconds)

Published: Sat Jun 24 2023