4.3.4.4 Packet Tracer - Troubleshoot HSRP

hi friends welcome tour in this video we are going to see the packet tracer activity trouble truth HS RP we will go through the objectives and background in this activity we will the troubleshoot and resolve the HSR P issues in the network we will also verify that all the HS RP configurations amid the network requirements and - here is our background currently the users who can access www.assist.org has been updated to use H s RP to ensure the network availability to the users we must have verified that the users can still access the website if one of the routers is down so our one should always be the active router if it is a functioning here we can see our network requirements HS RP virtual router is 192 dot 168 or to 1 to 254 it is RP standby group is 1 and to DNS server is to not 9.1 65.2 no 2.2 157 our one should always be the active router when it is functioning properly 2 uses the default it says RP priority all users should be able to access www.ccltss.org rotors is a functioning right next is a troubleshooting process in step 1 PCs and laptops verify the PCs and laptops are configured correctly using the provided network requirements based on the network requirements are shown above verify that the PCs and laptops can navigate to www.assist.org PK a successfully right so we will check that coming to the topology we are going to access this webpage www.score.org is nt devices coming to PC 0 right web browser here we are going to give the URL yes we are getting the webpage coming to laptop zero yes coming to laptop one yes we are getting the webpage and coming to PC one right now we will check the PCs and laptops and there are IP address subnet mask and default gateway it's coming to PC zero right here we can see the details PC zero here we can see the IP address it's 1.10 yes default subnet mask and default gateway here we can see the default gateway is a st. incorrectly so we are going to give the default gateway as specified right coming to laptop 0 the stokke or will verify that laptop 0 its 1.11 right default gateway one ninety two dot one sixty eight dot one dot two fifty four yes it's correct coming to laptop one here we can see laptop one 1.12 default gateway is 1.2 54 so here we will change that right coming to pc one the Stolp pc one yes it's correct now we will come to step to troubleshoot our one disabled the interface a Gigabit Ethernet 0 / 1 on our to use the show commands to determine issues record and to correct any issues of fountain r1 we enable the interface the third 0 / 1 on r2 first of all we will disable the interface Gigabit Ethernet 0 / 1 on r2 coming to our to enable configure terminal we will go to the interface if you got with the turret 0/1 here we are going to give the shutdown command yes now we will use the show commands to determine the issues for coming to our one CLI right here we are going to give enable the show command the show standby brief and here will verify here we can see our one is configured with the incorrect standby group here we can see that they given 11 it should be 1 and it is not configured to primped here we can see P indicates a configure to print so it is not set also here we can see the priority is say T 250 the priority needs to be higher than hundred which is the priority on r2 we will correct these issues on r1 so coming to configure terminal we will go to the interface Gigabit Ethernet 0 / 1 and we will remove the stand by 11 so no standby 11 now we will create standby 1 the IP 192 dot 168 hopes yes dot one dot 254 right now we will give a standby 1 priority 1 not 1 and standby 1 print now we will re-enable the interface a gigabit 1/3 0 / 1 on r2 to give you know should command right now we will come to a step 3 troubleshoot our to disable the interface a Gigabit Ethernet 0/1 on our one then use the show commands to determine any issues record and correct any issues of found on our two after verifying that the PCs and laptops can navigate to www.assist.org the interface Gigabit Ethernet 0/1 on our one first of all we will disable the interface you give up with the third and 0/1 on our one so it looks it will go to the interface you gotta be the third 0/1 and we will give the shutdown command coming to our two right here we are going to give the show command the show standby brief and here we can see they said the group as a 1 1 1 so we are going to change that configure terminal we will go to the interface gigabit a third at 0 / 1 and here we are going to give at no standby 1 1 1 & 2 we are going to make create the standby 1 IP one ninety two dot one sixty eight dot one dot at 254 now we will access the webpage www.score.org is device is coming to PCC rolled as tow a browser yes we are getting right coming to laptop 1 ok coming to PC 1 right now we will enable the interface' gigabit ethernet 0/1 on our run will give no commander yes coming to a step four verify connectivity verify all pcs and laptops can navigate to a www.score.org our key requirements have been met again we will try to access this webpage www.score.org um into laptop zero right coming to laptop one coming to PC one yes yes that's all in this packet I saw activity here we can see our completion status 10 out of 10 so in this video we have seen troubleshoot HSR P friends if you have any doubt please comment below also if you like my video give a thump and don't forget to subscribe the channel so that you will get the latest uploading video info into our Gmail thank you

Channel: Tech Acad

Views: 16,701

Keywords: HSRP

Id: 2XUG2eJwGQE

Length: 10min 8sec (608 seconds)

Published: Wed Oct 18 2017