Hello, nice to meet you, family. This is Dailycom. Well today is Saturday Let's get to work First, the assembly work is completed, so I have a product to send today via quick delivery. The system looks cute with its white configuration. First of all, I am testing the graphics card by continuously increasing its temperature while applying a load to it. Once this is finished, I will pack it in a box for quick shipping. This is my first time seeing this case. There are pros and cons There are air holes all over the bottom of the power box, and about 70% of the sides have air holes just right. The downside is that there are no fans anymore. It may be a bit burdensome to assemble high-spec products, but I think it would be okay to use it when assembling basic products. Hello, this is computer I called because it was scheduled to be sent today as expedited shipping. After receiving the address, we will now send it via Kakao T by 3 o'clock. Now then, how should we catch it? Then please send me the address. Then, let me catch it. Just wait. One body box, one parts box, and two will go to Yeongtong-ro, Hwaseong-si. Now, let’s call a quick car service using Kakao T. The application has been completed. It says the driver will pick you up by 10:09. The quick delivery driver is coming in 30 minutes, so I have to put it in the box now. So, I finished packing like this. This is a collection of parts boxes where each part was used. This happens when you lay down the computer, especially the tempered glass side. A sign was posted saying, “Please point the other side toward the sky.” In this way, there are two main body and parts box, and I just posted one on KakaoTalk. I think it's an inquiry message and I have to respond now. This time we will send CPU AS. The model is Intel's highest CPU. I9-14900K is defective. A customer came yesterday and luckily he already had a 13900KS CPU. I told them to replace it with that and use it for now, and since the 14900K was confirmed to be defective, they packaged it and brought it to the CPU center. This is the first time the 14900K is defective. Actually, not many people use it. Today is Saturday, so delivery cannot be made. We will just pack it and ship it on Monday. Packaging completed Let me just look at the CPU temperature. It's difficult. It reboots once a day. If symptoms appear right away when we test for an hour or two, it's easy to find the cause. But I use the PC for about six to seven hours, so how can I find it once? It's not easy The CPU is currently at 50 degrees on the Ryzen 7700 The current temperature is 74 degrees, and from what I see, it could go up to 80 degrees. It's currently 76 or 77 degrees. I think it will rise to around 80 degrees, but my computer won't turn off just because it gets around 80 degrees. When it gets to the point where the computer actually turns off, you have to set it at 100 degrees. If it goes over 100 degrees, the computer will turn off. Well, you can think of it that way, and it doesn't turn off due to CPU temperature. To be precise, it's a reboot. It doesn't reboot because of the temperature. I changed something in the bios. / What? They said they did memory tuning. This memory is G-Skill gaming memory. If you talk about xmp AMD, EXOP is normally turned on. I originally used it with it turned on. What was it like before you did that? before setting it up You've used it before. It was the same back then / Yes, it was the same and I touched on it. As soon as I assembled it, I was looking for it and using it. Let me ask you more easily. The problem is that it keeps rebooting, so I tried resetting the bios settings. / Yes, that's still the case, isn't it? / is it so Even if I set the default settings, it was the same. The computer does not reboot due to the CPU temperature of 79 degrees. I'll submit it first. Please leave this to me and I will keep it running for a long time, usually about 3 days to a week on a weekday. As I mentioned before, the customer's PC is really difficult to catch now, and it reboots once a day. Well, it's really hard to catch something like this. Let me do some testing. Now, this product was just brought in by a customer, but it reboots while in use. It looks like he went to a local repair shop. I guess I probably didn't receive it. Because it reboots once or twice a day, it's actually difficult to find the cause of this. General computer repair shops are reluctant to accept it. First, I'm going to start testing from today. The CPU is a Ryzen 7700 I will give it a try and give it a try for about 3-4 days before proceeding. The customer suspected that it was because of the CPU temperature, but when I tested it earlier, the temperature was around 80 degrees or 81 degrees when I ran Cinebench. It doesn't turn off due to temperature It doesn't reboot Also, the graphic card has 3 rows and is a bit heavy, so it was showing symptoms of sagging. So I told the customer and put up a support bar, and it was roughly level. I will test it starting today. I don't think I can tell you today what the problem is. The PC now looks like an ultra-slim PC. It's used at an academy, so what if we have a power failure? I'm sorry, but we can't repair this. HP model because this power supply is not standard. This should be standard, ATX, mini, or ultra-slim power, but we can't do this because it was made in a power size with HP's exclusive style. You have to go to HP You have to search on Naver or call HP customer service and go there. Once it's standardized, we'll take care of something. We can't do anything about foreign products because they are manufactured according to their own standards. Can I give you the HP customer service phone number? No, no, if you search on the internet, you'll find everything. I can't do anything for you because the size itself doesn't fit. Wow, it came in 22 days. This is a water cooler. I sent it to AS due to a defective water cooler. We sent it on the 2nd. We sent it on the 2nd, but today is the 24th, so it came in 22 days. This company is really slow, but there was no phone call...ㅠ It's a Thermaltake product, it has 3 rows, and was this the original model? Ah, I'm confused because this is old. It's really slow, but the exchange was processed in 22 days. I'm currently running a memory test on this PC, but it doesn't seem to be a memory problem. I'm running it with MEMtest86 and it works well without errors. It's been 1 hour and 8 minutes since I ran the test. There doesn't seem to be anything wrong with it. What's the problem with the memory? Then, is there a problem with the power? Thank you very much. They sent me a dual air-cooled sample. It just arrived. Let's try opening it together. It wasn't planned, but since you sent me something, let's watch it with my family. It is dual air-cooled and is called CNPS14X Duo. It's black, and when I was just looking for information, Shop Danawa sold it for around 49,000 won. I'll take a look. If you look at the fan here, you can see that there are sharp protrusions on the blades. This is called a shark fin, and I think blowing it while the fan spins helps a bit. Zalman has a lot of products like this, but recently they are made with shark fins and look like protrusions. Each one has protrusions, and there are many coolers with shark fins like this. There are two pwm 120MM fans, and this is the radiator you see here. Dual radiator (heat sink) all black, neat. I saw earlier that it said that tdp supports up to 270W, but I think it is installed this way. I think it will look neater if installed in a black case. What I pay most attention to is the backplate. What does the backplate look like? The backplate of the old cooler was a bit difficult to install. It was uncomfortable, but this is good The back plate material used in many third-party products is made of thick steel. It doesn't seem to bend or break, and there is double-sided tape to prevent it from falling off when attached. Usually, if you don't have double-sided tape, if you mount it on the board and remove the radiator during after-sales service, it falls off. It's helpful because you won't fall if you stay here. When installing or reinstalling, installation doesn't seem that difficult. I think I'll have to install it sometime and check the temperature, airflow, etc. It doesn't look bad If it's okay, the performance is good and the noise is okay, then I think I can use it as my main device. The design seems to be good, and this product needs to be assembled by today, but the CPU has not arrived yet, so I cannot begin the assembly process right now. The CPU is Intel 13600KF, but you ordered it in bulk. The cpu hasn't arrived yet The board is Z790 Tomahawk Max WiFi SK Hynix P41 1Tera case is Micronics Wizmax ML-420 BTF. Cases that support next-generation motherboards Graphics card is Emtech RTX 4080 Super Gaming Pro power is GX-1000 Seasonic Power. I have a Kraken 360 water cooler, and I only selected products that would be perfect, but the CPU hasn't arrived yet. I need to come quickly so I can work on this, but if I can't work today, I may have to go to work tomorrow. It's Sunday and I ordered a CPU on Thursday but didn't make the payment. I didn't know. Why didn't it come the next day? It was time for the delivery to arrive, but when I checked, I found out that it hadn't been shipped because I hadn't paid for it. So, it's a day late, so I'm working on it today. I'm filming some vlogs. Could you please give me the mouse? Let’s take a look. Here, let's plug it into our PC. There's a receiver in it. It's on and off. Of course, you turned it on. Because sometimes there are people who are mistaken. Take care of it equally That's right, he's not eating. Yes, I think the two receivers were changed because both were not working, but no, we used them separately. But they say both don't work. From what I see, there are two identical models, so this may have changed. Would you like to buy a mouse? / Yes, the design is the same because my hands are used to it. The warranty period has passed... I thought the two receivers might have been changed, so we tried that too, but it didn't work. Please give me that too. I have inserted this into the pad receiver. Good luck. Goodbye. I bought a Logitech mouse a few years ago, but it's been 3 years. They said they were using two of the same model, but both were not recognized, so they brought it with them. I tested it and it's ours. I tested it and it really doesn't move and doesn't work. Since there are two models, you may sometimes confuse the two receivers and use them incorrectly, so I instructed you to check the receivers one more time. Your name is I'll check it here. There were no special problems. You can do it. It's not difficult. If you can't, just bring it to a nearby computer store or to our store and we'll work on it. The power switch is here If you run water cooling, the temperature will be displayed in the middle here. This is the CPU temperature. Can't you change the color of this or that? You can change the color. Also available in white White is also available I did all the testing The temperature comes out. The CPU temperature comes out like this and it is correct to some extent. And the Zalman A36 water cooler controls the temperature well. I changed the color of this, but if you want to change the color, here is the GCC app. Run the GCC app and you will see RGB fusion. Click here to get RGB Fusion Here, the color is set to white, which is what I did, so you can change it like this. Then, the all-white case is white, so white is the prettiest. Then, I'll take it like this. All I have to do now is enter the CD key. / Yes, I've set up each driver setting, and all you have to do is go and use it. Well, the graphics driver, motherboard driver, and AMD chipset driver are all done. Since the memory is also turned on in Expo, if you look at the memory here, all 6000Mhz are activated, so you can go ahead and use it. If you look at the DP terminal behind here, it is next to HDMI. Do not plug it in above DP 3 HDMI 1. I'll put a sticker saying "Plug it here." Do you have any other questions? Gigabyte's default color is red. Even now, things like memory have changed to red. When I turn off the computer and now when Windows is running, the program application called GCC is activated and it turns white. Of course, the boxes used include motherboard, water cooling, power, graphics card, and CPU. Inside the main pod box are storage devices and memory boxes, so take care of them carefully. I think it went well with the white composition. The power cable is here. The electric wire is inside the power box. This case is called Zalman P30 and it is a white case. The two 120MM fans on the side are reverse fans. I'll put it all together. Did it come out the way you thought it would? Yes, I'm going to try white since it's black now. The white is a bit brighter When you lie down on your computer, this side is made of tempered glass. If you lay it down, place it like this so that the side I attached is facing toward the sky. One side is tempered glass, so the side you can see is facing up. Yes, it's done. Just take it carefully. Yes, sell a lot. I'll use it well. thank you ah yes thank you It's 1:50 now, but I don't think the person who made the reservation for 1:00 will show up. There has been no contact so far and it appears to have been cancelled. Sometimes, there are people who don't come without telling you, and about half of them call you. The half who say they can't come and will go next time seem to just quietly pass by. Well, the CPU has just arrived. I need to assemble a 13600KF bulk and two 5600Mhz 16GB from Team Group products. When do I do this? The main body turns on, but the monitor sometimes does not turn on. This is what you were talking about. Now the screen doesn't come on at all. Then, if you keep rebooting it a few times, it will come back on. Rebooting means turning it off and on and off and on a few times. What terminal did you use? Did you use HDMI, did you use DP? wait a minute First, open the main unit and connect it to the monitor. You connected here and here. Really You cannot connect here. Let’s take a look at what you already connected. It's a DVI cable, and this is now a DP. I heard the customer used it as a DP, but why did you plug it in here? There is also dvi here A separate graphics card must be plugged in here. You can't plug it into the built-in graphics. Since you're using DP, let's plug it in. Put the monitor back and use it No. One? DP is uploaded right away. Then, I think you should check carefully at home. DP is also plugged in, and in the picture, DVI is plugged in here as well. When using two monitors and using dual monitors, if you plug them in this way, they will say, "Oh, that's what you did," but if you use one monitor, you won't be able to tell whether you connected the actual monitor as an example or as an example. Or maybe you have both plugged in. If you look at the back of the monitor, there are several plugging holes. You can take out two wires and plug them in here and plug them in here too. You can't do that. I don't know, but you have to plug one monitor cable into one monitor. If you go to one and there is both DP and DVI, of course DP has priority over DVI. Don't use this Just plug in the DP here and use it. If this is excluded, I will use dvi. Then, not here, but here You have to put the dvi here and write it like this. Let's come up I heard it all well, no, you shouldn't use it like that. First of all, you made a mistake in the connection itself. For example, when the monitor first received a signal, it received DP as priority, but one day, the priority changed to DVI. Then it won't show up. Because the graphics card is plugged in, I did it a while ago. Of course, you can do it, but if the method itself is not normal, you have to do it properly and check whether it works or not. You understand. Yes, I'm trying to explain it as easily as possible. I think you can clean the inside, use a compressor to clean it, and then take it with you. If the customer changes Since the 2.5-inch SSD is now outdated, if the motherboard supports M.2, installing M.2 NVNe is faster and better. There is a slot for customers now. If you want to use this window as is Then, what we call migration is to copy the window here as is. Then please do it / I will do it for you. Then, I will clean it and install the NVNe 500G SK Hynix P31 since I mainly use it and do the work. I'm copying the entire window. I'll do that for you. I'll clean it up. I dropped it a while ago and thought it might be broken again, but for some reason it felt weird. Students passing by were surprised and stood still. I watched a lot of YouTube, and when I saw something like this, it said it was a bad CPU or something. Please come clean. This is not for me. I will do it for you. Since the compressor is in front, you can do it yourself, but if you do it wrong, it can be damaged. Ah, it was originally a hard disk. Was it an SSD? But someone I knew said he would replace it, so he just replaced it. Yes, just a company bro So, if they changed it without charging me, I should at least use this. Ah, he's a good acquaintance. Alright, customer, it's done. It happened faster than I thought. Because both are SSDs, the speed is fast and I was able to work quickly with them. This is a newly installed SK Hynix P31 500GB. This is now in C, and I formatted the 120GB I used previously and set it to the D drive. I think you can use it, and the speed will be much faster. Still, NVMe is much faster than 2.5 inches. Do you have any other questions? What game should I access? Oh yes, I think you can use it. I think you can use that monitor cable by plugging it into DP. Thank you. Now, this time, a person near a local customer store must have had a broken printer, so he asked me to print out 50 sheets, so I printed 50 sheets for him. It's 50 sheets, but it's not free, and he charged me the cost of the paper. I think you can just put it here like this. If you don't pay for mine, I'll have to print it out. This is a notice attached to the case box. I wrote it all down. I print it out and use it whenever I need it. You can make stickers at a print shop, but I don't use them often. When I go to a print shop, I usually have to print out 1,000 pages, so I just print them out on the printer whenever I need them. Let's see if it comes out well. I guess I don't have enough red toner. What's wrong? The cooler doesn't work / Yes Fortunately, the acrylic is not straight right now, but is slightly curved, slightly rounded like this. So that's what it is now and it's really fitting. First of all, the height is okay, so the case is a bit small. I think you can look at it that way. Is it sudden relief or does it stop working after you do something? This isn't the only fan that doesn't spin. It's hardened now and it's stiff now. The rear fan doesn't work and it's hardened. Is the reason now because of dust? Of course, dust is one reason, but I guess it's because the fan is old. Since it is a consumable item, how old is it? The one in front isn't spinning now, and the one in the back is now covered, so you might not know it, but the one in the back is shaking. All the fans have reached a certain level of lifespan. I think the fan needs to be replaced. What should I do? I'll take the fan out. Is there anything else special? Do you have any other questions or anything like that? It doesn't work or anything like that. I think I need to do some cleaning. There's a lot of dust right now. Should I clean it and then come back? I'll do some cleaning. I'll do some air cleaning and then take a look. But there are no identical coolers. To feel similar, they have to be a little similar. Did you originally configure this case like this because the space was small, or did you keep changing it like this? It's been like this in this case from the beginning. I think it would have been better to have a slightly larger case. Ah, the fan in the back is not RGB. It's a monochromatic 120MM with no lights on and RGB comes on only at the front. I'll try to make it as similar as possible by making the LED light come on. It doesn't matter if it doesn't turn on. There is a fan that comes on as well. First of all, put it like this The front is linked to 5vrgb, so I think you can do it the same way. It's done. I'll try turning it on. It's roughly similar. I adjusted it as best as I could. Next time when assembling, make the case a little bigger Just look at it and you can see it's a little bent here. It breaks down Of course, if the cooler doesn't run, the CPU temperature rises. If the CPU temperature rises too high, the computer may turn off, or the frame rate of the customer's work or game may drop. Strangely, it seems to be stuttering again. That could be it. Should I just do one more CP temperature test and finish it? It's a 3700X. The CPU could go up to 67-68 degrees, or even 70 degrees, but if it goes up that much, it's not a problem or anything. The temperature is not high Do you have any other questions? I replaced the front fan with a fan using the same method. Then I will finish. The customer said on KakaoTalk that he would send it via quick delivery to 3 computers, so it has just arrived. He said something wasn't working. Hyundai doesn't respond when I press the power button. The two cars are new but won't boot. The Q LED lights up for DRAM. That's what you wrote. A new one?? If it's a new product, shouldn't you contact the company you purchased it from? There is also a business trip service sticker here, but why did you send it to us without receiving after-sales service from the purchasing company? In this case, in case of initial defect, it is correct to contact the purchasing company. First of all, I wore 3 units. Well, the 13600KF bulk CPU arrived a little late and I just finished assembling it. I'm finishing the finishing touches now, and since the case is just big, there's plenty of space inside. I'm currently working on the water cooler hose line. If you tie it with a cable tie, it will become more angular. In this way, the water cooling hose is tied with a cable tie. It's plenty The case in question is the Micronics ML-420 BTF case. It is a case I reviewed once. It is a big tower and is quite large. 420 water cooling can also be installed. The graphics card power wiring can also be removed from the front, and assembly is complete. The expected shipping date is Monday, so I think it should be shipped on Monday. But I don't remember what I was told earlier about what's not working, so today's call volume was too high, so I said something's not working. Rendering..error If it is a rendering error, please tell me in simple terms, what is it? When you say you don't have enough rendering video memory, what is the CPU when playing Tekken 8 or Hogwarts Legacy? CPU I9-14900K 14900K I packed it to send to AS in the morning, but I didn't take a video yesterday either, and I don't take a lot of videos these days because the CPU is defective. Is there too much? Not too many, but only broken people come to us. So in general, I can't say that much. Of course, from our perspective, there are a lot of people because only those who have broken items bring them in. Let's give the game a try I think I could try playing Hogwarts Legacy. I tried a lot of different things to try to solve the problem. Oh, I just can't solve it. It can't be solved When I run it, it pops up right away, but it doesn't open at all and just a warning message pops up. This is how it pops up. And sometimes it reboots Blue screen while using, reboot If you try again and again, it will reboot or a blue screen will appear and it will reboot. Why don't you use a better water cooling system? I didn't feel like the cooler was particularly important, so I just bought a cheap one, but they said it was important. Of course, especially now that the 13900K and 14900K temperatures are so high, the cooling needs to be good too. For now, I'll try changing the CPU. I don't have to do anything else. I'll change the CPU. If I remove the bracket to remove the CPU, it will fall out. I'll try changing it to 14700K. You came after watching a video about this symptom. There's almost nothing posted. No matter how much I searched, I couldn't find much information, and it seems that this happens mostly to people who use high-end computers. And at first, the center technician said he had seen this symptom for the first time, but it is starting to appear often these days. What kind of thermal grease did you apply? I called him and did it because I didn't have time, but after that, he kept looking for the CPU and he said there were a lot of problems, so it must be a defective CPU. I mentioned the defective CPU to him a few times, but he said it was absolutely not a defective CPU and that I needed to find the cause. But they said it would be a problem with Steam games. The game company should have prevented an error from occurring when applying 14900K, but the game company failed to do so. Does that make sense? It doesn't make sense. So the i9 CPU can't play Steam games? That doesn't make sense. I don't think it's something like blocking the CPU, and the temperature from 13900K is too high, so in fact, there are some people who are a little reluctant to use 14900K. I also wanted to use air cooling, but they said that the 14900K absolutely requires water cooling, so I had no choice but to install water cooling. I wanted to use air-cooled, but maybe I was just greedy for a lower version or something like that. I thought the more expensive it was, the less likely it would break down. He said that too But I thought it would be better But from our perspective, the expensive ones tend to break down easily. CPU I7-14700K has many ambiguous faults. I'm going to turn it over here now. I saw these symptoms several times, so I saw them yesterday too. So I have nothing else to do. At first, I just tried everything with customers. I tried changing the graphics card, changing the driver problem, changing the graphics driver, changing it to something else, changing the memory, and even the service center didn't know at the time. When they said they saw it for the first time, they tried reinstalling Windows, changing graphics drivers, changing everything, but no matter how much they tried, it didn't work / didn't work, so we just replaced the CPU and tried it. When we didn't know, we looked at different things and tried everything. Because I changed the CPU and I did this yesterday too. If you look briefly while it is playing, is Duke 1000W? If Duke 1000, there is no dedicated cable for 12vhpwr. You plug in the 12vhpwr dedicated cable. Then, here is the graphics card auxiliary power cable. You can plug the chip here and plug it in with one hand like this. There is no need to plug in all four wires like this, messy like now. There will be a line It's in the power box, right? First of all, Hogwarts Legacy will work fine. There will be a 12VHPWR line. Just plug one wire here and plug that wire here into the graphics card. Watch now There are so many wires here. They're messy. It's the same 12VHPWR. Would you like to come and see it? I just put it together. It's 12VHPWR now, and it's the one strand I mentioned. The line goes like this. It's simple Just plug it in like this. You don't have to do it this much. Yes, that's right. Plug it in with one line like this. The wire / is inside the power box. If there is no cable, the Duke product is a Max Elite brand. You can contact Ax Elite and purchase the cable. And another reason why we do not recommend it is that there are many more reasons for poor contact. This is because the distribution line is connected in the middle, so contact failure can occur here as well. Tekken was worse in four places. Can I try Tekken too? Even when Tekken keeps playing really seriously, I don't know how to play because I don't play the game. If I get into a difficult game, I don't know how to get out. It works well / I came in and even now the rendering doesn't appear and it goes on fine. What are you going to do? Now the customer has to make a choice. Since the CPU is defective, the customer needs to decide how to finish the i9-14900K, whether to go directly to the center and receive after-sales service and install it myself, or to ask us to do it for them and leave it there. Then, would you please leave it to me? Okay then, when the cpu comes, I'll plug it in and run it. Then, I'll leave it to you and next time you come to pick it up and say it's done, if you have that wire, you can bring it and connect it~~ Yes, you can do that. I don't think I can connect the wire by myself, so you'll say that. I'll bring it. I've only had this for two weeks. But it's only been 2 weeks and I haven't actually used it and now I called them (where I purchased it) and they said they can't do anything if I throw away the box. I said it looks like the CPU is defective but I can't throw it away. Because they said there was nothing they could do. So, there is a distributor written on the box and we need to check with that, but I asked them to confirm that I threw away the box, so we can't confirm that. Open it and check it Usually there are three CPU communication centers. Since there are three companies: PC Direct, Coit, and Intech & Company, we need to check the CPU and find out which distributor it is, and then send AS to that distributor. Then, I understand. I will finish it. It means the power is not turned on. Yes, that's right, it happened suddenly. My computer suddenly crashed and now it won't boot up. I force it to turn off and on a few times and then it won't turn on? Well, the LED comes on. Have you touched anything else, set anything, or anything like that? Yes. Are you talking about overclocking or something like that? No, I tried removing the graphics card and things like that. I also tried removing and plugging in the memory, but it didn't work even when I shorted the internal power terminal. I guess it's because the power supply is old. It's been 5 years. I'm trying it now to test it. It's the same even if you change the power. It's not a power failure I called him once on a business trip and he also said something about his power and that he was weak. Well, they told me to replace this and that, so I think I'll have to take out the graphics card. Sometimes it doesn't work because of the graphics card. From what you've said, I've been using it for a while now and it crashes and from then on it doesn't work and it doesn't work. You've been saying various things so I've installed the fan upside down. Earlier, I told you to do this and that except for the memory there. Still doesn't turn on I tried taking out the battery, letting it discharge, and turning it back on. If that doesn't work, I guess I'll have to try attaching and detaching the CPU. First of all, the motherboard battery is dead. Is it done? I bought a new one and this is new. The discharged red battery is dead. I'll let the board discharge a little later and then plug in the battery and turn it on again. Still no response Lastly, I will try to remove the CPU. After removing the CPU, I will now remove the memory. If half of the CPU is missing, it can be considered a defective board. Have you ever removed the CPU? a moment ago.... As of now, these models are a bit out of whack (AM4 Socket Bangsak) That's because it's a no-draw. If the CPU goes down, it could be damaged. A no-draw could cause problems. So, when you search on the Internet, you will see something that makes you angry when you take it out. Oh my~~ Oh my~~ There is a CPU problem. I think the customer made a mistake, but if you look at it now while installing it, I'm not sure if you can see it clearly, but if you look at it, it's bent in an L shape. There should be two of them, this one and this one, like this, but it's bent to the side right now. We can't touch it anymore It breaks if you touch it, so I can fix it if it's slightly bent like this. However, if you try to open it because it is bent at 90 degrees, it will snap and break. There are companies that repair Ryzen 3500. If they say it's possible by changing the CPU, all you have to do is buy a new CPU. If you look here, I mentioned it here and here. Let me zoom in. Oh, look, that's right, it was bent 90 degrees. It's now bent. If you push it like this to smoke it, it will break. There are specialized companies like repair centers for this. Here too / Yes, this place is also bent 90 degrees right now. This is how it should be, and this is how you understand it. I pin it next to it like this and it's reaching right now. I broke it a few times. Yes, as I said before, you cannot replace the CPU or perform after-sales service at the center. Since this is consumer negligence, there are specialized repair shops that repair CPUs. However, it is up to the customer to choose whether to leave it to us or change the CPU. I will show you how it works by plugging in a different CPU. I found the cause Ryzen 3500 CPU defective. How did it bend in two places, top and bottom in the middle? When I saw it, it looked like he had forced the socket into something, but he touched the CPU. I unplugged and plugged in the CPU. If you had said this, I would have looked at the cpu sooner. Let's turn it on Is it on or not? It's on. It's up. It's working. I plugged in a 3200G CPU, so two 8GB memory works fine, but the conclusion is that the CPU is defective. Two CPU pins are bent into an L shape. I think it was probably pressed by force. Then, you are saying that you will just buy a used one with a similar grade to the 3500 you used. / Yes, do that and give me a thermal. Should I just give you a used thermal? I am grateful Well, you have to buy a good one, and I'll give you one that you just used. I just replaced the battery. Yes, thank you So, today's Saturday schedule is all over. It's now 6:25. I think I should finish it and get ready to leave work soon. Actually, I couldn't even eat lunch today, so I think I should eat some food and then get off work. Well, today, I don't think there was much after-sales service that was this complicated and a little bit difficult. I think the last three vehicles that arrived through quick service will need to be inspected starting Monday. I'm curious about what the problem is, and for now, I'm going to buy rice. I think I need to eat some first. Thank you for joining us for today’s Saturday computer store vlog. Computer stores work like this. Ah, this is how my day has been. I would be grateful if you could think of it kindly. All computer stores are like that. Well, we do business and do business with this routine like today. Okay, that's the end of today's video. I'll see you again next time. Oh, I'm tired. I'm sleepy. I think I need to eat first and use up some energy. See you next time in another video. Bye.